On Thu, 2020-07-02 at 14:58 -0600, Rob Herring wrote: > On Thu, Jul 02, 2020 at 08:57:05PM +0800, Hanks Chen wrote: > > From: Andy Teng <andy.teng@xxxxxxxxxxxx> > > > > Add devicetree bindings for MediaTek MT6779 pinctrl driver. > > > > Signed-off-by: Andy Teng <andy.teng@xxxxxxxxxxxx> > > --- > > .../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml | 210 ++++++++++++++++++++ > > 1 file changed, 210 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml > > > > diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml > > new file mode 100644 > > index 0000000..3a9fc4d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml > > @@ -0,0 +1,210 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml*__;Iw!!CTRNKA9wMg0ARbw!0474C4nwnSzS27r76why4qthf5712hrWflC57fdhSU7LzHZYpD7W0t5ZhJBgmnpF-A$ > > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!0474C4nwnSzS27r76why4qthf5712hrWflC57fdhSU7LzHZYpD7W0t5ZhJAzv-fiRw$ > > + > > +title: Mediatek MT6779 Pin Controller Device Tree Bindings > > + > > +maintainers: > > + - Andy Teng <andy.teng@xxxxxxxxxxxx> > > + > > +description: |+ > > + The pin controller node should be the child of a syscon node with the > > + required property: > > + - compatible: "syscon" > > + > > +properties: > > + compatible: > > + const: mediatek,mt6779-pinctrl > > + > > + reg: > > + minItems: 9 > > + maxItems: 9 > > + description: | > > + physical address base for gpio-related control registers. > > Need to describe what each entry is. > > items: > - description: ... > - description: ... > - description: ... > Got it, I'll add description in next version. Thanks! > > + > > + reg-names: > > + description: | > > + GPIO base register names. The names are "gpio", "iocfg_rm", > > + "iocfg_br", "iocfg_lm", "iocfg_lb", "iocfg_rt", "iocfg_lt", > > + "iocfg_tl", "eint"; > > The names should be a schema. > Got it, I'll fix it. > > > + > > + gpio-controller: true > > + > > + "#gpio-cells": > > + const: 2 > > + description: | > > + Number of cells in GPIO specifier. Since the generic GPIO > > + binding is used, the amount of cells must be specified as 2. See the below > > + mentioned gpio binding representation for description of particular cells. > > + > > + gpio-ranges: > > + minItems: 1 > > + maxItems: 5 > > + description: | > > + GPIO valid number range. > > + > > + interrupt-controller: true > > + > > + interrupts: > > + maxItems: 1 > > + description: | > > + Specifies the summary IRQ. > > + > > + "#interrupt-cells": > > + const: 2 > > + > > +required: > > + - compatible > > + - reg > > + - reg-names > > + - gpio-controller > > + - "#gpio-cells" > > + - gpio-ranges > > + - interrupt-controller > > + - interrupts > > + - "#interrupt-cells" > > + > > +patternProperties: > > + '-[0-9]*$': > > + type: object > > + patternProperties: > > + '-pins*$': > > + type: object > > + description: | > > + A pinctrl node should contain at least one subnodes representing the > > + pinctrl groups available on the machine. Each subnode will list the > > + pins it needs, and how they should be configured, with regard to muxer > > + configuration, pullups, drive strength, input enable/disable and input schmitt. > > Need to include the pinconf schema here. Got it, I'll add it in next version. > > > + > > + properties: > > + pinmux: > > + description: > > + integer array, represents gpio pin number and mux setting. > > + Supported pin number and mux varies for different SoCs, and are defined > > + as macros in boot/dts/<soc>-pinfunc.h directly. > > + > > + bias-disable: > > + type: boolean > > Don't redefine the type. Just indicate what common properties are used: > > bias-disable: true Got it, I'll fix it in next version. > > > + > > + bias-pull-up: > > + type: boolean > > + > > + bias-pull-down: > > + type: boolean > > + > > + input-enable: > > + type: boolean > > + > > + input-disable: > > + type: boolean > > + > > + output-low: > > + type: boolean > > + > > + output-high: > > + type: boolean > > + > > + input-schmitt-enable: > > + type: boolean > > + > > + input-schmitt-disable: > > + type: boolean > > + > > + mediatek,pull-up-adv: > > + description: | > > + Pull up setings for 2 pull resistors, R0 and R1. User can > > + configure those special pins. Valid arguments are described as below: > > + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. > > + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. > > + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. > > + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. > > + allOf: > > You can drop the allOf now. Got it, I'll drop it in next version. Thanks > > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + - enum: [0, 1, 2, 3] > > + > > + mediatek,pull-down-adv: > > + description: | > > + Pull down settings for 2 pull resistors, R0 and R1. User can > > + configure those special pins. Valid arguments are described as below: > > + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. > > + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. > > + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. > > + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + - enum: [0, 1, 2, 3] > > + > > + drive-strength: > > + description: | > > + Selects the drive strength for the specified pins in mA. > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + - enum: [2, 4, 6, 8, 10, 12, 14, 16] > > + > > + required: > > + - pinmux > > + > > + additionalProperties: false > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/pinctrl/mt6779-pinfunc.h> > > + > > + pio: pinctrl@10005000 { > > + compatible = "mediatek,mt6779-pinctrl"; > > + reg = <0 0x10005000 0 0x1000>, > > + <0 0x11c20000 0 0x1000>, > > + <0 0x11d10000 0 0x1000>, > > + <0 0x11e20000 0 0x1000>, > > + <0 0x11e70000 0 0x1000>, > > + <0 0x11ea0000 0 0x1000>, > > + <0 0x11f20000 0 0x1000>, > > + <0 0x11f30000 0 0x1000>, > > + <0 0x1000b000 0 0x1000>; > > + reg-names = "gpio", "iocfg_rm", > > + "iocfg_br", "iocfg_lm", > > + "iocfg_lb", "iocfg_rt", > > + "iocfg_lt", "iocfg_tl", > > + "eint"; > > + gpio-controller; > > + #gpio-cells = <2>; > > + gpio-ranges = <&pio 0 0 210>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; > > + > > + mmc0_pins_default: mmc0-0 { > > + cmd-dat-pins { > > + pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>, > > + <PINMUX_GPIO172__FUNC_MSDC0_DAT1>, > > + <PINMUX_GPIO169__FUNC_MSDC0_DAT2>, > > + <PINMUX_GPIO177__FUNC_MSDC0_DAT3>, > > + <PINMUX_GPIO170__FUNC_MSDC0_DAT4>, > > + <PINMUX_GPIO173__FUNC_MSDC0_DAT5>, > > + <PINMUX_GPIO171__FUNC_MSDC0_DAT6>, > > + <PINMUX_GPIO174__FUNC_MSDC0_DAT7>, > > + <PINMUX_GPIO167__FUNC_MSDC0_CMD>; > > + input-enable; > > + mediatek,pull-up-adv = <1>; > > + }; > > + clk-pins { > > + pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>; > > + mediatek,pull-down-adv = <2>; > > + }; > > + rst-pins { > > + pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>; > > + mediatek,pull-up-adv = <0>; > > + }; > > + }; > > + }; > > + > > + mmc0 { > > + pinctrl-0 = <&mmc0_pins_default>; > > + pinctrl-names = "default"; > > + }; > > -- > > 1.7.9.5 > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@xxxxxxxxxxxxxxxxxxx > https://urldefense.com/v3/__http://lists.infradead.org/mailman/listinfo/linux-mediatek__;!!CTRNKA9wMg0ARbw!0474C4nwnSzS27r76why4qthf5712hrWflC57fdhSU7LzHZYpD7W0t5ZhJDOADfrzw$
