[PATCH v3 1/2] hwmon: shtc1: add support for device tree bindings

[Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>]

Add support for DTS bindings for the sensirion shtc1,shtw1 and shtc3.

Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>
---
 drivers/hwmon/shtc1.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c
index a0078ccede03..827d421b2b8f 100644
--- a/drivers/hwmon/shtc1.c
+++ b/drivers/hwmon/shtc1.c
@@ -14,6 +14,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/platform_data/shtc1.h>
+#include <linux/of.h>
 
 /* commands (high precision mode) */
 static const unsigned char shtc1_cmd_measure_blocking_hpm[]    = { 0x7C, 0xA2 };
@@ -196,6 +197,7 @@ static int shtc1_probe(struct i2c_client *client,
 	enum shtcx_chips chip = id->driver_data;
 	struct i2c_adapter *adap = client->adapter;
 	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
 
 	if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) {
 		dev_err(dev, "plain i2c transactions not supported\n");
@@ -233,8 +235,14 @@ static int shtc1_probe(struct i2c_client *client,
 	data->client = client;
 	data->chip = chip;
 
-	if (client->dev.platform_data)
-		data->setup = *(struct shtc1_platform_data *)dev->platform_data;
+	if (np) {
+		data->setup.blocking_io = of_property_read_bool(np, "sensirion,blocking_io");
+		data->setup.high_precision = !of_property_read_bool(np, "sensicon,low_precision");
+	} else {
+		if (client->dev.platform_data)
+			data->setup = *(struct shtc1_platform_data *)dev->platform_data;
+	}
+
 	shtc1_select_command(data);
 	mutex_init(&data->update_lock);
 
@@ -257,8 +265,19 @@ static const struct i2c_device_id shtc1_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, shtc1_id);
 
+static const struct of_device_id shtc1_of_match[] = {
+	{ .compatible = "sensirion,shtc1" },
+	{ .compatible = "sensirion,shtw1" },
+	{ .compatible = "sensirion,shtc3" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, shtc1_of_match);
+
 static struct i2c_driver shtc1_i2c_driver = {
-	.driver.name  = "shtc1",
+	.driver = {
+		.name = "shtc1",
+		.of_match_table = shtc1_of_match,
+	},
 	.probe        = shtc1_probe,
 	.id_table     = shtc1_id,
 };
-- 
2.20.1