Hello. On 05/30/2014 04:14 PM, Yoshihiro Shimoda wrote:
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> --- arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e06c486..e6b04f2 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -902,4 +902,14 @@ #size-cells = <0>; status = "disabled"; }; + + xhci: xhci@ee000000 {
The node name should be "usb@ee000000", according to section 2.2.2 of the ePAPR standard [1]:
Thank you for the point! I will fix this and r8a7791's one.
+ compatible = "renesas,xhci-r8a7790"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; + phys = <&usbphy 1 1>;
This part is dependent on the generic PHY support in the USB HCD in order to work.
Oops, I hadn't seen that you added generic PHY support to the xHCI driver when writing this. I'm however for adding the generic PHY support to the generic USB HCD code, so that we can use it for the PCI controllers.
This means that I should wait to add this parameter until the generic USB PHY Gen2 driver is supported in upstream?
At least describe that dependency.
Best regards, Yoshihiro Shimoda
WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html