This series adds an initial support for Pine64 PinePhone 1.2. The differences against 1.1 and 1.0 are larger. So far this series describes the magnetometer interrupt that is wired correctly on 1.2 and backlight differences. There are also a lot of changes in how modem gpios are exposed, and in HDMI/USB bridge and USB power in this revision. Those will be expressed later, when the base dtsi gains support for these things. Please take a look. thank you and regards, Ondrej Jirman Ondrej Jirman (3): dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings arm64: dts: allwinner: Add support for PinePhone revision 1.2 arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V .../devicetree/bindings/arm/sunxi.yaml | 5 +++ arch/arm64/boot/dts/allwinner/Makefile | 1 + .../allwinner/sun50i-a64-pinephone-1.2.dts | 40 +++++++++++++++++++ .../dts/allwinner/sun50i-a64-pinephone.dtsi | 4 +- 4 files changed, 48 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts -- 2.27.0
