Hi Krzysztof,
> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Sent: 02 July 2020 21:22
> To: Thierry Reding <thierry.reding@xxxxxxxxx>; Uwe Kleine-König <u.kleine-
> koenig@xxxxxxxxxxxxxx>; Lee Jones <lee.jones@xxxxxxxxxx>; Rob Herring
> <robh+dt@xxxxxxxxxx>; Kukjin Kim <kgene@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzk@xxxxxxxxxx>; linux-pwm@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> samsung-soc@xxxxxxxxxxxxxxx
> Cc: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>; Bartlomiej Zolnierkiewicz
> <b.zolnierkie@xxxxxxxxxxx>; Sylwester Nawrocki <snawrocki@xxxxxxxxxx>;
> Alim Akhtar <alim.akhtar@xxxxxxxxxxx>; Chanwoo Choi
> <cw00.choi@xxxxxxxxxxx>; Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> Subject: [PATCH v2 2/8] arm64: dts: exynos: Describe PWM interrupts on
> Exynos7
>
> Add interrupts property to PWM node on Exynos7 to describe the hardware
> fully. No functional change as the interrupts are not used by drivers.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>
Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
> ---
>
> Changes since v1:
> 1. Correct the interrupts, change message.
>
> Not tested
> ---
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index f590891efe25..709742b98c9c 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -581,6 +581,11 @@
> pwm: pwm@136c0000 {
> compatible = "samsung,exynos4210-pwm";
> reg = <0x136c0000 0x100>;
> + interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
> samsung,pwm-outputs = <0>, <1>, <2>, <3>;
> #pwm-cells = <3>;
> clocks = <&clock_peric0 PCLK_PWM>;
> --
> 2.17.1
