On 2020-07-02 21:16, Tomasz Nowicki wrote:
From: Hanna Hawa <hannah@xxxxxxxxxxx>
Due to erratum #582743, the Marvell Armada-AP806 can't access 64bit to
ARM SMMUv2 registers.
Provide implementation relevant hooks:
- split the writeq/readq to two accesses of writel/readl.
- mask the MMU_IDR2.PTFSv8 fields to not use AArch64 format (but
only AARCH32_L) since with AArch64 format 32 bits access is not supported.
Note that separate writes/reads to 2 is not problem regards to
atomicity, because the driver use the readq/writeq while initialize
the SMMU, report for SMMU fault, and use spinlock in one
case (iova_to_phys).
The comment about the spinlock seems to be out of date, and TBH that
whole sentence is a bit unclear - how about something like:
"Note that most 64-bit registers like TTBRn can be accessed as two
32-bit halves without issue, and AArch32 format ensures that the
register writes which must be atomic (for TLBI etc.) need only be 32-bit."
Signed-off-by: Hanna Hawa <hannah@xxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
Signed-off-by: Tomasz Nowicki <tn@xxxxxxxxxxxx>
---
Documentation/arm64/silicon-errata.rst | 3 ++
drivers/iommu/arm-smmu-impl.c | 52 ++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 936cf2a59ca4..157214d3abe1 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -125,6 +125,9 @@ stable kernels.
| Cavium | ThunderX2 Core | #219 | CAVIUM_TX2_ERRATUM_219 |
+----------------+-----------------+-----------------+-----------------------------+
+----------------+-----------------+-----------------+-----------------------------+
+| Marvell | ARM-MMU-500 | #582743 | N/A |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
| Freescale/NXP | LS2080A/LS1043A | A-008585 | FSL_ERRATUM_A008585 |
+----------------+-----------------+-----------------+-----------------------------+
+----------------+-----------------+-----------------+-----------------------------+
diff --git a/drivers/iommu/arm-smmu-impl.c b/drivers/iommu/arm-smmu-impl.c
index c75b9d957b70..c1fc5e1b8193 100644
--- a/drivers/iommu/arm-smmu-impl.c
+++ b/drivers/iommu/arm-smmu-impl.c
@@ -147,6 +147,53 @@ static const struct arm_smmu_impl arm_mmu500_impl = {
.reset = arm_mmu500_reset,
};
+static u64 mrvl_mmu500_readq(struct arm_smmu_device *smmu, int page, int off)
+{
+ u64 val;
+
+ /*
+ * Marvell Armada-AP806 erratum #582743.
+ * Split all the readq to double readl
+ */
+ val = (u64)readl_relaxed(arm_smmu_page(smmu, page) + off + 4) << 32;
+ val |= readl_relaxed(arm_smmu_page(smmu, page) + off);
Even though io-64-nonatomic-hi-lo.h doesn't override readq() etc. for
64-bit builds, you can still use hi_lo_readq_relaxed() directly.
+
+ return val;
+}
+
+static void mrvl_mmu500_writeq(struct arm_smmu_device *smmu, int page, int off,
+ u64 val)
+{
+ /*
+ * Marvell Armada-AP806 erratum #582743.
+ * Split all the writeq to double writel
+ */
+ writel_relaxed(upper_32_bits(val), arm_smmu_page(smmu, page) + off + 4);
+ writel_relaxed(lower_32_bits(val), arm_smmu_page(smmu, page) + off);
Similarly, hi_lo_writeq_relaxed().
+}
+
+static u32 mrvl_mmu500_cfg_id2_fixup(u32 id)
+{
+
+ /*
+ * Armada-AP806 erratum #582743.
+ * Hide the SMMU_IDR2.PTFSv8 fields to sidestep the AArch64
+ * formats altogether and allow using 32 bits access on the
+ * interconnect.
+ */
+ id &= ~(ARM_SMMU_ID2_PTFS_4K | ARM_SMMU_ID2_PTFS_16K |
+ ARM_SMMU_ID2_PTFS_64K);
+
+ return id;
+}
+
+static const struct arm_smmu_impl mrvl_mmu500_impl = {
+ .read_reg64 = mrvl_mmu500_readq,
+ .write_reg64 = mrvl_mmu500_writeq,
+ .cfg_id2_fixup = mrvl_mmu500_cfg_id2_fixup,
+ .reset = arm_mmu500_reset,
+};
+
struct arm_smmu_device *arm_smmu_impl_init(struct arm_smmu_device *smmu)
{
@@ -160,6 +207,11 @@ struct arm_smmu_device *arm_smmu_impl_init(struct arm_smmu_device *smmu)
*/
switch (smmu->model) {
case ARM_MMU500:
+ if (of_device_is_compatible(smmu->dev->of_node,
Nit: there's a local "np" variable now.
+ "marvell,ap806-smmu-500")) {
+ smmu->impl = &mrvl_mmu500_impl;
+ return smmu;
+ }
Please put this with the other integration checks below the switch
statement. Yes, it means we'll end up assigning smmu->impl twice for
this particular case, but that's the intended pattern.
Robin.
smmu->impl = &arm_mmu500_impl;
break;
case CAVIUM_SMMUV2:
