The Versaclock chips can drive the output pins in several modes: LVDS,
CMOS, LVPECL etc. Allow configuring the output mode from device tree.
The configuration is optional. If not specified, the mode will not be
configured and the drive mode will be the chip default.
Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
---
drivers/clk/clk-versaclock5.c | 71 +++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index 60c7cf9acde3..eec57286fae0 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -89,6 +89,8 @@
/* Clock control register for clock 1,2 */
#define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n))
+#define VC5_CLK_OUTPUT_CFG0_MODE_SHIFT 5
+#define VC5_CLK_OUTPUT_CFG0_MODE_MASK GENMASK(7, 5)
#define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0)
#define VC5_CLK_OE_SHDN 0x68
@@ -117,6 +119,23 @@
/* chip has PFD requency doubler */
#define VC5_HAS_PFD_FREQ_DBL BIT(1)
+/*
+ * Output modes. Values for VC5_CLK_OUTPUT_CFG(idx,0) bits [7:5].
+ * IDT_VC5_OUT_UNKNOWN = keep the hardware default.
+ */
+enum vc5_out_mode {
+ IDT_VC5_OUT_MODE_LVPECL = 0,
+ IDT_VC5_OUT_MODE_CMOS = 1,
+ IDT_VC5_OUT_MODE_HCSL33 = 2,
+ IDT_VC5_OUT_MODE_LVDS = 3,
+ IDT_VC5_OUT_MODE_CMOS2 = 4,
+ IDT_VC5_OUT_MODE_CMOSD = 5,
+ IDT_VC5_OUT_MODE_HCSL25 = 6,
+
+ IDT_VC5_OUT_NUM_MODES,
+ IDT_VC5_OUT_MODE_UNKNOWN = 99,
+};
+
/* Supported IDT VC5 models. */
enum vc5_model {
IDT_VC5_5P49V5923,
@@ -149,6 +168,7 @@ struct vc5_out_data {
struct clk_hw hw;
struct vc5_driver_data *vc5;
unsigned int num;
+ enum vc5_out_mode mode:8;
};
struct vc5_driver_data {
@@ -593,6 +613,13 @@ static int vc5_clk_out_prepare(struct clk_hw *hw)
return ret;
}
+ /* Set output drive mode */
+ if (hwdata->mode != IDT_VC5_OUT_MODE_UNKNOWN)
+ regmap_update_bits(vc5->regmap,
+ VC5_CLK_OUTPUT_CFG(hwdata->num, 0),
+ VC5_CLK_OUTPUT_CFG0_MODE_MASK,
+ (hwdata->mode << VC5_CLK_OUTPUT_CFG0_MODE_SHIFT));
+
/* Enable the clock buffer */
regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
VC5_CLK_OUTPUT_CFG1_EN_CLKBUF,
@@ -696,6 +723,46 @@ static int vc5_map_index_to_output(const enum vc5_model model,
}
}
+static int vc5_parse_dt(struct vc5_driver_data *vc5)
+{
+ struct device *dev = &vc5->client->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child;
+ u32 val;
+ int n;
+
+ for (n = 1; n < vc5->chip_info->clk_out_cnt; n++)
+ vc5->clk_out[n].mode = IDT_VC5_OUT_MODE_UNKNOWN;
+
+ for_each_child_of_node(np, child) {
+ if (of_property_read_u32(child, "reg", &n)) {
+ dev_err(dev, "%pOF: missing reg property\n", child);
+ break;
+ }
+
+ if (n == 0 || n >= vc5->chip_info->clk_out_cnt) {
+ dev_err(dev, "%pOF: invalid reg %d\n", child, n);
+ break;
+ }
+
+ if (!of_property_read_u32(child, "idt,drive-mode", &val)) {
+ if (val >= IDT_VC5_OUT_NUM_MODES) {
+ dev_err(dev, "%pOF: invalid idt,drive-mode %u\n",
+ child, val);
+ break;
+ }
+ vc5->clk_out[n].mode = val;
+ }
+ }
+
+ if (child) {
+ of_node_put(child);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct of_device_id clk_vc5_of_match[];
static int vc5_probe(struct i2c_client *client,
@@ -723,6 +790,10 @@ static int vc5_probe(struct i2c_client *client,
if (PTR_ERR(vc5->pin_clkin) == -EPROBE_DEFER)
return -EPROBE_DEFER;
+ ret = vc5_parse_dt(vc5);
+ if (ret)
+ return ret;
+
vc5->regmap = devm_regmap_init_i2c(client, &vc5_regmap_config);
if (IS_ERR(vc5->regmap)) {
dev_err(&client->dev, "failed to allocate register map\n");
--
2.27.0
