Re: [PATCH v2 3/3] ARM: dts: rockchip: add rk3288 ISP and DPHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello all,

Sorry for my late reply, please see below,

On 4/23/20 8:12 AM, Johan Jonker wrote:
> Hi robh, Heiko, Karthik, Helen and others,
> 
> See comments below.
> Should we change Helen's patch serie a little bit to accommodate other
> isp1 compatibles as well? Could you give advise here? Thanks!
> 
> Johan
> 
> 
> On 4/23/20 7:10 AM, karthik poduval wrote:
>> Hi Johan/Helen,
>>
>> I was attempting to fix the yaml to work for both platforms rk3288 and
>> rk3399. I couldn't find any specific example in the existing yaml files
>> that deal with this exact scenario common driver but different clocks for
>> different chipsets. Could you point me to an appropriate example ?
>>
>> Meanwhile here is the patch I was trying out.
>> diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>> b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>> index af246b71eac6..4ca76a1bbb63 100644
>> --- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>> +++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>> @@ -15,7 +15,11 @@ description: |
>>
>>  properties:
>>    compatible:
>> -    const: rockchip,rk3399-cif-isp
>> +    items:
>> +      - enum:
>> +        - rockchip,rk3288-cif-isp
>> +        - rockchip,rk3399-cif-isp
>> +      - const: rockchip,rk3399-cif-isp
>>
>>    reg:
>>      maxItems: 1
>> @@ -37,20 +41,38 @@ properties:
>>      const: dphy
>>
> 
>>    clocks:
>> -    items:
>> -      - description: ISP clock
>> -      - description: ISP AXI clock clock
>> -      - description: ISP AXI clock  wrapper clock
>> -      - description: ISP AHB clock clock
>> -      - description: ISP AHB wrapper clock
>> +    oneOf:
>> +      # rk3399 clocks
>> +      - items:
>> +        - description: ISP clock
>> +        - description: ISP AXI clock clock
>> +        - description: ISP AXI clock  wrapper clock
>> +        - description: ISP AHB clock clock
>> +        - description: ISP AHB wrapper clock
>> +      # rk3288 clocks
>> +      - items:
>> +        - description: ISP clock
>> +        - description: ISP AXI clock clock
>> +        - description: ISP AHB clock clock
>> +        - description: ISP Pixel clock
>> +        - description: ISP JPEG source clock
>>
> 
> We can expect a few more clocks here, so just use:
> 
>   clocks:
>     minItems: 4
>     maxItems: 5
> 
> or
> 
> See question for Helen about 'pclk_isp_wrap':
> 
>   clocks:
>     minItems: 4
>     maxItems: 6
> 
> 
> From Rockchip tree:
> 
> static const char * const rk1808_isp_clks[] = {
> 	"clk_isp",
> 	"aclk_isp",
> 	"hclk_isp",
> 	"pclk_isp",
> };
> 
> static const char * const rk3288_isp_clks[] = {
> 	"clk_isp",
> 	"aclk_isp",
> 	"hclk_isp",
> 	"pclk_isp_in",
> 	"sclk_isp_jpe",
> };
> 
> static const char * const rk3326_isp_clks[] = {
> 	"clk_isp",
> 	"aclk_isp",
> 	"hclk_isp",
> 	"pclk_isp",
> };
> 
> static const char * const rk3368_isp_clks[] = {
> 	"clk_isp",
> 	"aclk_isp",
> 	"hclk_isp",
> 	"pclk_isp",
> };
> 
> static const char * const rk3399_isp_clks[] = {
> 	"clk_isp",
> 	"aclk_isp",
> 	"hclk_isp",
> 	"aclk_isp_wrap",
> 	"hclk_isp_wrap",
> 	"pclk_isp_wrap"
> };

I was checking the clock topology, and we don't need aclk_isp and hclk_isp,
since they are parents of the "wrap" versions:

 xin24m
...
    pll_npll
       npll
          clk_isp1
          clk_isp0
...
    pll_cpll
...
       cpll
          aclk_isp1
             aclk_isp1_noc
             hclk_isp1
                aclk_isp1_wrapper
                hclk_isp1_noc
          aclk_isp0
             hclk_isp1_wrapper
             aclk_isp0_wrapper
             aclk_isp0_noc
             hclk_isp0
                hclk_isp0_wrapper
                hclk_isp0_noc
...
 pclkin_isp1_wrapper


(it is a bit weird that hclk_isp1_wrapper is a child of aclk_isp0, but this is how
is described in the SoC TRM)

I tested with only:

static const char * const rk3399_isp_clks[] = {
	"clk_isp",
	"aclk_isp_wrap",
	"hclk_isp_wrap",
};

And it works, and it doesn't work when removing any of those.

> 
> Question for Helen:
> 
> Where did 'pclk_isp_wrap' go in your patch serie?

There are two instances of the ISPv1 in the SoC (isp0 and isp1), but I can only test
isp0 on rk3399

It seems that isp1 requires pclk_isp_wrap, so we can add it as optional in the bindings (see below).

> 
>>    clock-names:
>> -    items:
>> -      - const: clk_isp
>> -      - const: aclk_isp
>> -      - const: aclk_isp_wrap
>> -      - const: hclk_isp
>> -      - const: hclk_isp_wrap
>> +    oneOf:
>> +      # rk3399 clocks
> 
> sort on SoC
> 
>> +      - items:
>> +        - const: clk_isp
>> +        - const: aclk_isp
>> +        - const: aclk_isp_wrap
>> +        - const: hclk_isp
>> +        - const: hclk_isp_wrap
>> +      # rk3288 clocks
> 
> sort on SoC
> 
>> +      - items:
>> +        - const: clk_isp
>> +        - const: aclk_isp
>> +        - const: hclk_isp
>> +        - const: pclk_isp_in
>> +        - const: sclk_isp_jpe
> 
>   clock-names:
>     oneOf:
>       # rk3288 clocks
>       - items:
>         - const: clk_isp
>           description: ISP clock
>         - const: aclk_isp
>           description: ISP AXI clock clock
>         - const: hclk_isp
>           description: ISP AHB clock clock
>         - const: pclk_isp_in
>           description: ISP Pixel clock
>         - const: sclk_isp_jpe
>           description: ISP JPEG source clock
>       # rk3399 clocks
>       - items:
>         - const: clk_isp
>           description: ISP clock
>         - const: aclk_isp
>           description: ISP AXI clock clock
>         - const: aclk_isp_wrap
>           description: ISP AXI clock  wrapper clock
>         - const: hclk_isp
>           description: ISP AHB clock clock
>         - const: hclk_isp_wrap
>           description: ISP AHB wrapper clock


I suggest this:

  clocks:
    maxItems: 5
    minItems: 3
    description:
      rk3288 clocks
        ISP clock
        ISP AXI clock
        ISP AHB clock
        ISP Pixel clock
        ISP JPEG source clock
      rk3399 isp0 clocks
        ISP clock
        ISP AXI wrapper clock
        ISP AHB wrapper clock
      rk3399 isp1 clocks
        ISP clock
        ISP AXI wrapper clock
        ISP AHB wrapper clock
        ISP Pixel wrapper clock

  clock-names:
    oneOf:
      # rk3288 clocks
      - items:
        - const: clk_isp
        - const: aclk_isp
        - const: hclk_isp
        - const: pclk_isp_in
        - const: sclk_isp_jpe
      # rk3399 isp0 clocks
      - items:
        - const: clk_isp
        - const: aclk_isp_wrap
        - const: hclk_isp_wrap
      # rk3399 isp1 clocks
      - items:
        - const: clk_isp
        - const: aclk_isp_wrap
        - const: hclk_isp_wrap
        - const: pclk_isp_wrap

Where "# rk3288 clocks", "# rk3399 isp0 clocks" and "# rk3399 isp1 clocks" could be
added in separated patchsets that are sure those works corretly.

Regards,
Helen

> 
> Question for robh:
> Is this a proper way to add description or is there a beter way?
> 
>>
>> on running command.
>> make ARCH=arm dtbs_check
>> DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>>
>> I see following messages for dts nodes.
>>  DTC     arch/arm/boot/dts/rk3288-firefly-beta.dt.yaml
>>   CHECK   arch/arm/boot/dts/rk3288-firefly-beta.dt.yaml
>> /home/kpoduval/workspace/tinkerboard-yocto/build/tmp/work/tinker_board-poky-linux-gnueabi/linux-stable/5.5.7+gitAUTOINC+ceab3ac1e6-r0/linux-tinker_board-standard-build/arch/arm/boot/dts/rk3288-firefly-beta.dt.yaml:
>> isp@ff910000: clocks: [[7, 107], [7, 205], [7, 469], [7, 371], [7, 108]] is
>> valid under each of {'additionalItems': False, 'items': [{}, {}, {}, {},
>> {}], 'maxItems': 5, 'minItems': 5, 'type': 'array'}, {'additionalItems':
>> False, 'items': [{}, {}, {}, {}, {}], 'maxItems': 5, 'minItems': 5, 'type':
>> 'array'}
>> /home/kpoduval/workspace/tinkerboard-yocto/build/tmp/work/tinker_board-poky-linux-gnueabi/linux-stable/5.5.7+gitAUTOINC+ceab3ac1e6-r0/linux-tinker_board-standard-build/arch/arm/boot/dts/rk3288-firefly-beta.dt.yaml:
>> isp@ff910000: compatible: ['rockchip,rk3288-cif-isp'] is too short
>>
>> Are these cosidered as error messages ? The "too short" is being alerted
>> for the orgianl yaml for rk3399 without any of my chnages.
>> Kindly advise.
>>
>> --
>> Regards,
>> Karthik Poduval
>>
>> On Sat, Apr 11, 2020 at 10:13 PM karthik poduval <karthik.poduval@xxxxxxxxx>
>> wrote:
>>
>>> Thanks Johan for your valuable comments.
>>>
>>> On Wed, Apr 8, 2020 at 6:19 PM Johan Jonker <jbx6244@xxxxxxxxx> wrote:
>>>>
>>>> Hi Karthik and others,
>>>>
>>>> Include all mail lists found with:
>>>> ./scripts/get_maintainer.pl --nogit-fallback --nogit
>>>>
>>>> Helen is moving isp1 bindings out of staging.
>>>> Clocks and other things don't fit with her patch serie.
>>>> Maybe fix this while still in staging?
>>>>
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
>>>> 'phys' is a required property
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
>>>> 'phy-names' is a required property
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
>>>> 'ports' is a required property
>>>>
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
>>>> 'assigned-clock-rates', 'assigned-clocks'
>>>> do not match any of the regexes: 'pinctrl-[0-9]+'
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
>>>> clock-names:2: 'aclk_isp_wrap' was expected
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
>>>> clock-names:3: 'hclk_isp' was expected
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
>>>> clock-names:4: 'hclk_isp_wrap' was expected
>>>>
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: 'power-domains'
>>>> is a required property
>>>>
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: clock-names:1:
>>>> 'dphy-cfg' was expected
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: clock-names:
>>>> ['dphy-ref', 'pclk'] is too short
>>>> arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: clocks: [[7,
>>>> 126], [7, 358]] is too short
>>>>
>>>>
>>>> Inside yaml:
>>>> Use enum and sort.
>>>>>>  properties:
>>>>>>    compatible:
>>>>
>>>>>>      const: rockchip,rk3399-cif-isp
>>>>>> +    const: rockchip,rk3288-rkisp1
>>>>
>>>>     enum:
>>>>       - rockchip,rk3288-rkisp1
>>>>       - rockchip,rk3399-cif-isp
>>>>
>>>>>>  properties:
>>>>>>    compatible:
>>>>>>      const: rockchip,rk3399-mipi-dphy-rx0
>>>>>> +    const: rockchip,rk3288-mipi-dphy-rx0
>>>>
>>>>     enum:
>>>>       - rockchip,rk3288-mipi-dphy-rx0
>>>>       - rockchip,rk3399-mipi-dphy-rx0
>>>>
>>>>>
>>>>> Please, keep consistency, or rk3288-cif-isp, or we change
>>> rk3399-cif-isp to be rk3399-rkisp1.
>>>>
>>>>
>>>> On 4/6/20 9:30 AM, Karthik Poduval wrote:
>>>>> ISP and DPHY device entries missing so add them.
>>>>>
>>>>
>>>>> tested on tinkerbaord with ov5647 using command
>>>>> cam -c 1 -C -F cap
>>>>
>>>> Disclose dts node for ov5647 in cover letter, so people can reproduce
>>>> this experiment.
>>>>
>>>> Caution!
>>>> Without dts node this command doesn't work correct.
>>>>
>>>> make ARCH=arm dtbs_check
>>>>
>>> DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>>>>
>>>> make ARCH=arm dtbs_check
>>>>
>>> DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
>>>>
>>>> Needed to detect missing: phys, phy-names and ports ,etc.
>>>>
>>>> &isp {
>>>>         status = "okay";
>>>> };
>>>>
>>> Makes sense, that's why my kernel compilation passed and I didn't
>>> these errors. Thanks for the command, I will verify dts for
>>> correctness in next patch series.
>>>
>>>> Needed to detect missing: power-domains, etc.
>>>>
>>>> &mipi_phy_rx0 {
>>>>         status = "okay";
>>>> };
>>>>
>>>>>
>>>>> Reported-by: Karthik Poduval <karthik.poduval@xxxxxxxxx>
>>>>> Signed-off-by: Karthik Poduval <karthik.poduval@xxxxxxxxx>
>>>>> ---
>>>>>  arch/arm/boot/dts/rk3288.dtsi | 25 +++++++++++++++++++++++++
>>>>>  1 file changed, 25 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/rk3288.dtsi
>>> b/arch/arm/boot/dts/rk3288.dtsi
>>>>> index 9beb662166aa..adea8189abd9 100644
>>>>> --- a/arch/arm/boot/dts/rk3288.dtsi
>>>>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>>>>> @@ -247,6 +247,23 @@
>>>>>               ports = <&vopl_out>, <&vopb_out>;
>>>>>       };
>>>>>
>>>>
>>>>> +     isp: isp@ff910000 {
>>>>
>>>> For nodes:
>>>> Sort things without reg alphabetical first,
>>>> then sort the rest by reg address.
>>>>
>>> Sure
>>>>> +             compatible = "rockchip,rk3288-rkisp1";
>>>>> +             reg = <0x0 0xff910000 0x0 0x4000>;
>>>>> +             interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>>>>> +             clocks = <&cru SCLK_ISP>, <&cru ACLK_ISP>,
>>>>> +                      <&cru HCLK_ISP>, <&cru PCLK_ISP_IN>,
>>>>> +                      <&cru SCLK_ISP_JPE>;
>>>>> +             clock-names = "clk_isp", "aclk_isp",
>>>>> +                           "hclk_isp", "pclk_isp_in",
>>>>> +                           "sclk_isp_jpe";
>>>>> +             assigned-clocks = <&cru SCLK_ISP>, <&cru SCLK_ISP_JPE>;
>>>>> +             assigned-clock-rates = <400000000>, <400000000>;
>>>>
>>>>> +             power-domains = <&power RK3288_PD_VIO>;
>>>>> +             iommus = <&isp_mmu>;
>>>>
>>>> sort
>>>>
>>>> Something missing?
>>>> Where are the ports and port nodes?
>>>
>>> I was assuming that this would be a part of the board specific dtsi or
>>> dts entry where the isp node would be overriden and the i2c camera
>>> port
>>> and the isp port remote-endpoints would be connected. I had this as a
>>> part of my first patch series. However I was advised by Helen to not
>>> include the ov5647
>>> dtsi as it isn't hardwired to the SoC and resides on an camera adapter
>>> board.
>>>
>>> Should this be defined without the remote-endpoint phandle since we
>>> don't know exactly which sensor gets connected in this dtsi file ?
>>>
>>>>
>>>>> +             status = "disabled";
> 
> Question for Heiko:
> Should we add status to Helen's serie as well?
> 
>>>>> +     };
>>>>> +
>>>>>       sdmmc: mmc@ff0c0000 {
>>>>>               compatible = "rockchip,rk3288-dw-mshc";
>>>>>               max-frequency = <150000000>;
>>>>> @@ -891,6 +908,14 @@
>>>>>                       status = "disabled";
>>>>>               };
>>>>>
>>>>
>>>>> +             mipi_phy_rx0: mipi-phy-rx0 {
>>>>
>>>> Use separate patch.
>>>>
>>>> For nodes:
>>>> Sort things without reg alphabetical first,
>>>> then sort the rest by reg address.
>>>>
>>> Sure
>>>
>>>>> +                     compatible = "rockchip,rk3288-mipi-dphy-rx0";
>>>>> +                     clocks = <&cru SCLK_MIPIDSI_24M>, <&cru
>>> PCLK_MIPI_CSI>;
>>>>> +                     clock-names = "dphy-ref", "pclk";
>>>> Something missing?
>>>> Does this phy have a power domain?
>>> The tinkerboard debian kernel (where I referred to for this patch)
>>> didn't have it defined for the DPHY. I would guess that it would be
>>> the same as the ISP i.e. RK3288_PD_VIO,
>>> does anyone know the answer to this or do I have to reach out to
>>> Rockchip engineering ?
>>>>
>>>>> +                     #phy-cells = <0>;
>>>>> +                     status = "disabled";
>>>>> +             };
>>>>> +
>>>>>               io_domains: io-domains {
>>>>>                       compatible = "rockchip,rk3288-io-voltage-domain";
>>>>>                       status = "disabled";
>>>>>
>>>>
>>>
>>>
>>> --
>>> Regards,
>>> Karthik Poduval
>>>
>>
>>
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux