Hi Robin,
On 20.05.20 00:05, Robin Gong wrote:
> Add NXP pca9450 pmic driver.
>
> Signed-off-by: Robin Gong <yibin.gong@xxxxxxx>
I rebased and applied on v5.8-rc3 an tested this with our i.MX8MM board
with PCA9450A. It seems to work fine. Below you can find some comments.
Thanks,
Frieder
> ---
> drivers/regulator/Kconfig | 8 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/pca9450-regulator.c | 859 ++++++++++++++++++++++++++++++++++
> include/linux/regulator/pca9450.h | 219 +++++++++
> 4 files changed, 1087 insertions(+)
> create mode 100644 drivers/regulator/pca9450-regulator.c
> create mode 100644 include/linux/regulator/pca9450.h
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index e8f7a09..d94c8ef 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -729,6 +729,14 @@ config REGULATOR_PBIAS
> This driver provides support for OMAP pbias modelled
> regulators.
>
> +config REGULATOR_PCA9450
> + tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
> + regulator driver.
> +
> config REGULATOR_PCAP
> tristate "Motorola PCAP2 regulator driver"
> depends on EZX_PCAP
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index e8f1633..356ca89 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -93,6 +93,7 @@ obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
> obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
> +obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o
> obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
> obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
> obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o
> diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
> new file mode 100644
> index 00000000..bdf256d
> --- /dev/null
> +++ b/drivers/regulator/pca9450-regulator.c
> @@ -0,0 +1,859 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2020 NXP.
> + * NXP PCA9450 pmic driver
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/of_regulator.h>
> +#include <linux/regulator/pca9450.h>
> +
> +struct pc9450_dvs_config {
> + unsigned int run_reg; /* dvs0 */
> + unsigned int run_mask;
> + unsigned int standby_reg; /* dvs1 */
> + unsigned int standby_mask;
> +};
> +
> +struct pca9450_regulator_desc {
> + struct regulator_desc desc;
> + const struct pc9450_dvs_config dvs;
> +};
> +
> +struct pca9450 {
> + struct device *dev;
> + struct regmap *regmap;
> + enum pca9450_chip_type type;
> + unsigned int rcnt;
> + int irq;
> +};
> +
> +static const struct regmap_range pca9450_status_range = {
> + .range_min = PCA9450_REG_INT1,
> + .range_max = PCA9450_REG_PWRON_STAT,
> +};
> +
> +static const struct regmap_access_table pca9450_volatile_regs = {
> + .yes_ranges = &pca9450_status_range,
> + .n_yes_ranges = 1,
> +};
> +
> +static const struct regmap_config pca9450_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .volatile_table = &pca9450_volatile_regs,
> + .max_register = PCA9450_MAX_REGISTER - 1,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +/*
> + * BUCK1/2/3
> + * BUCK1RAM[1:0] BUCK1 DVS ramp rate setting
> + * 00: 25mV/1usec
> + * 01: 25mV/2usec
> + * 10: 25mV/4usec
> + * 11: 25mV/8usec
> + */
> +static int pca9450_dvs_set_ramp_delay(struct regulator_dev *rdev,
> + int ramp_delay)
> +{
> + int id = rdev_get_id(rdev);
> + unsigned int ramp_value;
> +
> + switch (ramp_delay) {
> + case 1 ... 3125:
> + ramp_value = BUCK1_RAMP_3P125MV;
> + break;
> + case 3126 ... 6250:
> + ramp_value = BUCK1_RAMP_6P25MV;
> + break;
> + case 6251 ... 12500:
> + ramp_value = BUCK1_RAMP_12P5MV;
> + break;
> + case 12501 ... 25000:
> + ramp_value = BUCK1_RAMP_25MV;
> + break;
> + default:
> + ramp_value = BUCK1_RAMP_25MV;
> + }
> +
> + return regmap_update_bits(rdev->regmap, PCA9450_REG_BUCK1CTRL + id * 3,
> + BUCK1_RAMP_MASK, ramp_value << 6);
> +}
> +
> +static struct regulator_ops pca9450_dvs_buck_regulator_ops = {
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .list_voltage = regulator_list_voltage_linear_range,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_time_sel = regulator_set_voltage_time_sel,
> + .set_ramp_delay = pca9450_dvs_set_ramp_delay,
> +};
> +
> +static struct regulator_ops pca9450_buck_regulator_ops = {
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .list_voltage = regulator_list_voltage_linear_range,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_time_sel = regulator_set_voltage_time_sel,
> +};
> +
> +static struct regulator_ops pca9450_ldo_regulator_ops = {
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .list_voltage = regulator_list_voltage_linear_range,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> +};
> +
> +/*
> + * BUCK1/2/3
> + * 0.60 to 2.1875V (12.5mV step)
> + */
> +static const struct regulator_linear_range pca9450_dvs_buck_volts[] = {
> + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500),
> +};
With the latest kernel (v5.8-rc) this doesn't compile anymore because of
60ab7f4153b6 ("regulator: use linear_ranges helper"). I applied this
diff to fix it: https://diffy.org/diff/565iolhlwa0epcyxqmvgta9k9.
> +
> +/*
> + * BUCK4/5/6
> + * 0.6V to 3.4V (25mV step)
> + */
> +static const struct regulator_linear_range pca9450_buck_volts[] = {
> + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x70, 25000),
> + REGULATOR_LINEAR_RANGE(3400000, 0x71, 0x7F, 0),
> +};
> +
> +/*
> + * LDO1
> + * 1.6 to 3.3V ()
> + */
> +static const struct regulator_linear_range pca9450_ldo1_volts[] = {
> + REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000),
> + REGULATOR_LINEAR_RANGE(3000000, 0x04, 0x07, 100000),
> +};
> +
> +/*
> + * LDO2
> + * 0.8 to 1.15V (50mV step)
> + */
> +static const struct regulator_linear_range pca9450_ldo2_volts[] = {
> + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x07, 50000),
> +};
> +
> +/*
> + * LDO3/4
> + * 0.8 to 3.3V (100mV step)
> + */
> +static const struct regulator_linear_range pca9450_ldo34_volts[] = {
> + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x19, 100000),
> + REGULATOR_LINEAR_RANGE(3300000, 0x1A, 0x1F, 0),
> +};
> +
> +/*
> + * LDO5
> + * 1.8 to 3.3V (100mV step)
> + */
> +static const struct regulator_linear_range pca9450_ldo5_volts[] = {
> + REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
> +};
> +
> +static int buck_set_dvs(const struct regulator_desc *desc,
> + struct device_node *np, struct regmap *regmap,
> + char *prop, unsigned int reg, unsigned int mask)
> +{
> + int ret, i;
> + uint32_t uv;
> +
> + ret = of_property_read_u32(np, prop, &uv);
> + if (ret) {
> + if (ret != -EINVAL)
> + return ret;
> + return 0;
> + }
I think this nested condition is easier to read like this:
if (ret && ret == -EINVAL)
return 0;
else if (ret)
return ret;
> +
> + for (i = 0; i < desc->n_voltages; i++) {
> + ret = regulator_desc_list_voltage_linear_range(desc, i);
> + if (ret < 0)
> + continue;
> + if (ret == uv) {
> + i <<= ffs(desc->vsel_mask) - 1;
> + ret = regmap_update_bits(regmap, reg, mask, i);
> + break;
> + }
> + }
> +
> + return ret;
> +}
> +
> +static int pca9450_set_dvs_levels(struct device_node *np,
> + const struct regulator_desc *desc,
> + struct regulator_config *cfg)
> +{
> + struct pca9450_regulator_desc *data = container_of(desc,
> + struct pca9450_regulator_desc, desc);
> + const struct pc9450_dvs_config *dvs = &data->dvs;
> + unsigned int reg, mask;
> + char *prop;
> + int i, ret = 0;
> +
> + for (i = 0; i < PCA9450_DVS_LEVEL_MAX; i++) {
> + switch (i) {
> + case PCA9450_DVS_LEVEL_RUN:
> + prop = "nxp,dvs-run-voltage";
> + reg = dvs->run_reg;
> + mask = dvs->run_mask;
> + break;
> + case PCA9450_DVS_LEVEL_STANDBY:
> + prop = "nxp,dvs-standby-voltage";
> + reg = dvs->standby_reg;
> + mask = dvs->standby_mask;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + ret = buck_set_dvs(desc, np, cfg->regmap, prop, reg, mask);
> + if (ret)
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct pca9450_regulator_desc pca9450a_regulators[] = {
> + {
> + .desc = {
> + .name = "buck1",
> + .of_match = of_match_ptr("BUCK1"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK1,
> + .ops = &pca9450_dvs_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
> + .linear_ranges = pca9450_dvs_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
> + .vsel_mask = BUCK1OUT_DVS0_MASK,
> + .enable_reg = PCA9450_REG_BUCK1CTRL,
> + .enable_mask = BUCK1_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + .of_parse_cb = pca9450_set_dvs_levels,
> + },
> + .dvs = {
> + .run_reg = PCA9450_REG_BUCK1OUT_DVS0,
> + .run_mask = BUCK1OUT_DVS0_MASK,
> + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
> + .standby_mask = BUCK1OUT_DVS1_MASK,
> + },
> + },
> + {
> + .desc = {
> + .name = "buck2",
> + .of_match = of_match_ptr("BUCK2"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK2,
> + .ops = &pca9450_dvs_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM,
> + .linear_ranges = pca9450_dvs_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0,
> + .vsel_mask = BUCK2OUT_DVS0_MASK,
> + .enable_reg = PCA9450_REG_BUCK2CTRL,
> + .enable_mask = BUCK1_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + .of_parse_cb = pca9450_set_dvs_levels,
> + },
> + .dvs = {
> + .run_reg = PCA9450_REG_BUCK2OUT_DVS0,
> + .run_mask = BUCK2OUT_DVS0_MASK,
> + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
> + .standby_mask = BUCK2OUT_DVS1_MASK,
> + },
> + },
> + {
> + .desc = {
> + .name = "buck3",
> + .of_match = of_match_ptr("BUCK3"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK3,
> + .ops = &pca9450_dvs_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK3_VOLTAGE_NUM,
> + .linear_ranges = pca9450_dvs_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK3OUT_DVS0,
> + .vsel_mask = BUCK3OUT_DVS0_MASK,
> + .enable_reg = PCA9450_REG_BUCK3CTRL,
> + .enable_mask = BUCK3_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + .of_parse_cb = pca9450_set_dvs_levels,
> + },
> + .dvs = {
> + .run_reg = PCA9450_REG_BUCK3OUT_DVS0,
> + .run_mask = BUCK3OUT_DVS0_MASK,
> + .standby_reg = PCA9450_REG_BUCK3OUT_DVS1,
> + .standby_mask = BUCK3OUT_DVS1_MASK,
> + },
> + },
> + {
> + .desc = {
> + .name = "buck4",
> + .of_match = of_match_ptr("BUCK4"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK4,
> + .ops = &pca9450_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
> + .linear_ranges = pca9450_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK4OUT,
> + .vsel_mask = BUCK4OUT_MASK,
> + .enable_reg = PCA9450_REG_BUCK4CTRL,
> + .enable_mask = BUCK4_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "buck4",
> + .of_match = of_match_ptr("BUCK4"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK4,
> + .ops = &pca9450_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
> + .linear_ranges = pca9450_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK4OUT,
> + .vsel_mask = BUCK4OUT_MASK,
> + .enable_reg = PCA9450_REG_BUCK4CTRL,
> + .enable_mask = BUCK4_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
The description for buck4 is added twice here.
> + {
> + .desc = {
> + .name = "buck5",
> + .of_match = of_match_ptr("BUCK5"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK5,
> + .ops = &pca9450_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM,
> + .linear_ranges = pca9450_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK5OUT,
> + .vsel_mask = BUCK5OUT_MASK,
> + .enable_reg = PCA9450_REG_BUCK5CTRL,
> + .enable_mask = BUCK5_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "buck6",
> + .of_match = of_match_ptr("BUCK6"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK6,
> + .ops = &pca9450_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM,
> + .linear_ranges = pca9450_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK6OUT,
> + .vsel_mask = BUCK6OUT_MASK,
> + .enable_reg = PCA9450_REG_BUCK6CTRL,
> + .enable_mask = BUCK6_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo1",
> + .of_match = of_match_ptr("LDO1"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO1,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo1_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts),
> + .vsel_reg = PCA9450_REG_LDO1CTRL,
> + .vsel_mask = LDO1OUT_MASK,
> + .enable_reg = PCA9450_REG_LDO1CTRL,
> + .enable_mask = LDO1_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo2",
> + .of_match = of_match_ptr("LDO2"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO2,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo2_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts),
> + .vsel_reg = PCA9450_REG_LDO2CTRL,
> + .vsel_mask = LDO2OUT_MASK,
> + .enable_reg = PCA9450_REG_LDO2CTRL,
> + .enable_mask = LDO2_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo3",
> + .of_match = of_match_ptr("LDO3"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO3,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo34_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
> + .vsel_reg = PCA9450_REG_LDO3CTRL,
> + .vsel_mask = LDO3OUT_MASK,
> + .enable_reg = PCA9450_REG_LDO3CTRL,
> + .enable_mask = LDO3_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo4",
> + .of_match = of_match_ptr("LDO4"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO4,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo34_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
> + .vsel_reg = PCA9450_REG_LDO4CTRL,
> + .vsel_mask = LDO4OUT_MASK,
> + .enable_reg = PCA9450_REG_LDO4CTRL,
> + .enable_mask = LDO4_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo5",
> + .of_match = of_match_ptr("LDO5"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO5,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo5_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
> + .vsel_reg = PCA9450_REG_LDO5CTRL_H,
> + .vsel_mask = LDO5HOUT_MASK,
> + .enable_reg = PCA9450_REG_LDO5CTRL_H,
> + .enable_mask = LDO5H_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> +};
> +
> +/*
> + * Buck3 removed on PCA9450B and conneced with Buck1 internal for dual phase
Missing 't' in connected ^
> + * on PCA9450C as no Buck3.
> + */
> +static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
> + {
> + .desc = {
> + .name = "buck1",
> + .of_match = of_match_ptr("BUCK1"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK1,
> + .ops = &pca9450_dvs_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
> + .linear_ranges = pca9450_dvs_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
> + .vsel_mask = BUCK1OUT_DVS0_MASK,
> + .enable_reg = PCA9450_REG_BUCK1CTRL,
> + .enable_mask = BUCK1_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + .of_parse_cb = pca9450_set_dvs_levels,
> + },
> + .dvs = {
> + .run_reg = PCA9450_REG_BUCK1OUT_DVS0,
> + .run_mask = BUCK1OUT_DVS0_MASK,
> + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
> + .standby_mask = BUCK1OUT_DVS1_MASK,
> + },
> + },
> + {
> + .desc = {
> + .name = "buck2",
> + .of_match = of_match_ptr("BUCK2"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK2,
> + .ops = &pca9450_dvs_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM,
> + .linear_ranges = pca9450_dvs_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0,
> + .vsel_mask = BUCK2OUT_DVS0_MASK,
> + .enable_reg = PCA9450_REG_BUCK2CTRL,
> + .enable_mask = BUCK1_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + .of_parse_cb = pca9450_set_dvs_levels,
> + },
> + .dvs = {
> + .run_reg = PCA9450_REG_BUCK2OUT_DVS0,
> + .run_mask = BUCK2OUT_DVS0_MASK,
> + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
> + .standby_mask = BUCK2OUT_DVS1_MASK,
> + },
> + },
> + {
> + .desc = {
> + .name = "buck4",
> + .of_match = of_match_ptr("BUCK4"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK4,
> + .ops = &pca9450_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
> + .linear_ranges = pca9450_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK4OUT,
> + .vsel_mask = BUCK4OUT_MASK,
> + .enable_reg = PCA9450_REG_BUCK4CTRL,
> + .enable_mask = BUCK4_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "buck5",
> + .of_match = of_match_ptr("BUCK5"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK5,
> + .ops = &pca9450_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM,
> + .linear_ranges = pca9450_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK5OUT,
> + .vsel_mask = BUCK5OUT_MASK,
> + .enable_reg = PCA9450_REG_BUCK5CTRL,
> + .enable_mask = BUCK5_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "buck6",
> + .of_match = of_match_ptr("BUCK6"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_BUCK6,
> + .ops = &pca9450_buck_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM,
> + .linear_ranges = pca9450_buck_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
> + .vsel_reg = PCA9450_REG_BUCK6OUT,
> + .vsel_mask = BUCK6OUT_MASK,
> + .enable_reg = PCA9450_REG_BUCK6CTRL,
> + .enable_mask = BUCK6_ENMODE_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo1",
> + .of_match = of_match_ptr("LDO1"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO1,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo1_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts),
> + .vsel_reg = PCA9450_REG_LDO1CTRL,
> + .vsel_mask = LDO1OUT_MASK,
> + .enable_reg = PCA9450_REG_LDO1CTRL,
> + .enable_mask = LDO1_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo2",
> + .of_match = of_match_ptr("LDO2"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO2,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo2_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts),
> + .vsel_reg = PCA9450_REG_LDO2CTRL,
> + .vsel_mask = LDO2OUT_MASK,
> + .enable_reg = PCA9450_REG_LDO2CTRL,
> + .enable_mask = LDO2_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo3",
> + .of_match = of_match_ptr("LDO3"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO3,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo34_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
> + .vsel_reg = PCA9450_REG_LDO3CTRL,
> + .vsel_mask = LDO3OUT_MASK,
> + .enable_reg = PCA9450_REG_LDO3CTRL,
> + .enable_mask = LDO3_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo4",
> + .of_match = of_match_ptr("LDO4"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO4,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo34_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
> + .vsel_reg = PCA9450_REG_LDO4CTRL,
> + .vsel_mask = LDO4OUT_MASK,
> + .enable_reg = PCA9450_REG_LDO4CTRL,
> + .enable_mask = LDO4_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> + {
> + .desc = {
> + .name = "ldo5",
> + .of_match = of_match_ptr("LDO5"),
> + .regulators_node = of_match_ptr("regulators"),
> + .id = PCA9450_LDO5,
> + .ops = &pca9450_ldo_regulator_ops,
> + .type = REGULATOR_VOLTAGE,
> + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
> + .linear_ranges = pca9450_ldo5_volts,
> + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
> + .vsel_reg = PCA9450_REG_LDO5CTRL_H,
> + .vsel_mask = LDO5HOUT_MASK,
> + .enable_reg = PCA9450_REG_LDO5CTRL_H,
> + .enable_mask = LDO5H_EN_MASK,
> + .owner = THIS_MODULE,
> + },
> + },
> +};
> +
> +static irqreturn_t pca9450_irq_handler(int irq, void *data)
> +{
> + struct pca9450 *pca9450 = data;
> + struct regmap *regmap = pca9450->regmap;
> + unsigned int status;
> + int ret;
> +
> + ret = regmap_read(regmap, PCA9450_REG_INT1, &status);
> + if (ret < 0) {
> + dev_err(pca9450->dev,
> + "Failed to read INT1(%d)\n", ret);
> + return IRQ_NONE;
> + }
> +
> + if (status & IRQ_PWRON)
> + dev_warn(pca9450->dev, "PWRON interrupt.\n");
> +
> + if (status & IRQ_WDOGB)
> + dev_warn(pca9450->dev, "WDOGB interrupt.\n");
> +
> + if (status & IRQ_VR_FLT1)
> + dev_warn(pca9450->dev, "VRFLT1 interrupt.\n");
> +
> + if (status & IRQ_VR_FLT2)
> + dev_warn(pca9450->dev, "VRFLT2 interrupt.\n");
> +
> + if (status & IRQ_LOWVSYS)
> + dev_warn(pca9450->dev, "LOWVSYS interrupt.\n");
> +
> + if (status & IRQ_THERM_105)
> + dev_warn(pca9450->dev, "IRQ_THERM_105 interrupt.\n");
> +
> + if (status & IRQ_THERM_125)
> + dev_warn(pca9450->dev, "IRQ_THERM_125 interrupt.\n");
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int pca9450_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + enum pca9450_chip_type type = (unsigned int)(uintptr_t)
> + of_device_get_match_data(&i2c->dev);
> + const struct pca9450_regulator_desc *regulator_desc;
> + struct regulator_config config = { };
> + struct pca9450 *pca9450;
> + unsigned int device_id, i;
> + int ret;
> +
> + if (!i2c->irq) {
> + dev_err(&i2c->dev, "No IRQ configured?\n");
> + return -EINVAL;
> + }
> +
> + pca9450 = devm_kzalloc(&i2c->dev, sizeof(struct pca9450), GFP_KERNEL);
> + if (!pca9450)
> + return -ENOMEM;
> +
> + switch (type) {
> + case PCA9450_TYPE_PCA9450A:
> + regulator_desc = pca9450a_regulators;
> + pca9450->rcnt = ARRAY_SIZE(pca9450a_regulators);
> + break;
> + case PCA9450_TYPE_PCA9450BC:
> + regulator_desc = pca9450bc_regulators;
> + pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators);
> + break;
> + default:
> + dev_err(&i2c->dev, "Unknown device type");
> + return -EINVAL;
> + }
> +
> + pca9450->irq = i2c->irq;
> + pca9450->type = type;
> + pca9450->dev = &i2c->dev;
> +
> + dev_set_drvdata(&i2c->dev, pca9450);
> +
> + pca9450->regmap = devm_regmap_init_i2c(i2c,
> + &pca9450_regmap_config);
> + if (IS_ERR(pca9450->regmap)) {
> + dev_err(&i2c->dev, "regmap initialization failed\n");
> + return PTR_ERR(pca9450->regmap);
> + }
> +
> + ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID, &device_id);
> + if (ret) {
> + dev_err(&i2c->dev, "Read device id error\n");
> + return ret;
> + }
> +
> + /* Check your board and dts for match the right pmic */
> + if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) ||
> + ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) {
> + dev_err(&i2c->dev, "Device id(%x) mismatched\n",
> + device_id >> 4);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < pca9450->rcnt; i++) {
> + const struct regulator_desc *desc;
> + struct regulator_dev *rdev;
> + const struct pca9450_regulator_desc *r;
> +
> + r = ®ulator_desc[i];
> + desc = &r->desc;
> +
> + config.regmap = pca9450->regmap;
> + config.dev = pca9450->dev;
> +
> + rdev = devm_regulator_register(pca9450->dev, desc, &config);
> + if (IS_ERR(rdev)) {
> + ret = PTR_ERR(rdev);
> + dev_err(pca9450->dev,
> + "Failed to register regulator(%s): %d\n",
> + desc->name, ret);
> + return ret;
> + }
> + }
> +
> + ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL,
> + pca9450_irq_handler,
> + (IRQF_TRIGGER_FALLING | IRQF_ONESHOT),
> + "pca9450-irq", pca9450);
> + if (ret != 0) {
> + dev_err(pca9450->dev, "Failed to request IRQ: %d\n",
> + pca9450->irq);
> + return ret;
> + }
> + /* Unmask all interrupt except PWRON/WDOG/RSVD */
> + ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK,
> + IRQ_VR_FLT1 | IRQ_VR_FLT2 | IRQ_LOWVSYS |
> + IRQ_THERM_105 | IRQ_THERM_125,
> + IRQ_PWRON | IRQ_WDOGB | IRQ_RSVD);
> + if (ret) {
> + dev_err(&i2c->dev, "Unmask irq error\n");
> + return ret;
> + }
What about adding a print when the probe has succeeded? Otherwise we
don't see anything about the driver in the log, when it probed
successfully. Maybe something like:
dev_info(&i2c->dev, "probed\n");
which will result in the following message:
nxp-pca9450 0-0025: probed
> +
> + return 0;
> +}
> +
> +static const struct of_device_id pca9450_of_match[] = {
> + {
> + .compatible = "nxp,pca9450a",
> + .data = (void *)PCA9450_TYPE_PCA9450A,
> + },
> + {
> + .compatible = "nxp,pca9450b",
> + .data = (void *)PCA9450_TYPE_PCA9450BC,
> + },
> + {
> + .compatible = "nxp,pca9450c",
> + .data = (void *)PCA9450_TYPE_PCA9450BC,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, pca9450_of_match);
> +
> +static struct i2c_driver pca9450_i2c_driver = {
> + .driver = {
> + .name = "nxp-pca9450",
> + .of_match_table = pca9450_of_match,
> + },
> + .probe = pca9450_i2c_probe,
> +};
> +
> +static int __init pca9450_i2c_init(void)
> +{
> + return i2c_add_driver(&pca9450_i2c_driver);
> +}
> +module_init(pca9450_i2c_init);
> +
> +static void __exit pca9450_i2c_exit(void)
> +{
> + i2c_del_driver(&pca9450_i2c_driver);
> +}
> +module_exit(pca9450_i2c_exit);
> +
> +MODULE_AUTHOR("Robin Gong <yibin.gong@xxxxxxx>");
> +MODULE_DESCRIPTION("NXP PCA9450 Power Management IC driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
> new file mode 100644
> index 00000000..1bbd301
> --- /dev/null
> +++ b/include/linux/regulator/pca9450.h
> @@ -0,0 +1,219 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/* Copyright 2020 NXP. */
> +
> +#ifndef __LINUX_REG_PCA9450_H__
> +#define __LINUX_REG_PCA9450_H__
> +
> +#include <linux/regmap.h>
> +
> +enum pca9450_chip_type {
> + PCA9450_TYPE_PCA9450A = 0,
> + PCA9450_TYPE_PCA9450BC,
> + PCA9450_TYPE_AMOUNT,
> +};
> +
> +enum {
> + PCA9450_BUCK1 = 0,
> + PCA9450_BUCK2,
> + PCA9450_BUCK3,
> + PCA9450_BUCK4,
> + PCA9450_BUCK5,
> + PCA9450_BUCK6,
> + PCA9450_LDO1,
> + PCA9450_LDO2,
> + PCA9450_LDO3,
> + PCA9450_LDO4,
> + PCA9450_LDO5,
> + PCA9450_REGULATOR_CNT,
> +};
> +
> +enum {
> + PCA9450_DVS_LEVEL_RUN = 0,
> + PCA9450_DVS_LEVEL_STANDBY,
> + PCA9450_DVS_LEVEL_MAX,
> +};
> +
> +#define PCA9450_BUCK1_VOLTAGE_NUM 0x80
> +#define PCA9450_BUCK2_VOLTAGE_NUM 0x80
> +#define PCA9450_BUCK3_VOLTAGE_NUM 0x80
> +#define PCA9450_BUCK4_VOLTAGE_NUM 0x80
> +
> +#define PCA9450_BUCK5_VOLTAGE_NUM 0x80
> +#define PCA9450_BUCK6_VOLTAGE_NUM 0x80
> +
> +#define PCA9450_LDO1_VOLTAGE_NUM 0x08
> +#define PCA9450_LDO2_VOLTAGE_NUM 0x08
> +#define PCA9450_LDO3_VOLTAGE_NUM 0x20
> +#define PCA9450_LDO4_VOLTAGE_NUM 0x20
> +#define PCA9450_LDO5_VOLTAGE_NUM 0x10
> +
> +enum {
> + PCA9450_REG_DEV_ID = 0x00,
> + PCA9450_REG_INT1 = 0x01,
> + PCA9450_REG_INT1_MSK = 0x02,
> + PCA9450_REG_STATUS1 = 0x03,
> + PCA9450_REG_STATUS2 = 0x04,
> + PCA9450_REG_PWRON_STAT = 0x05,
> + PCA9450_REG_SWRST = 0x06,
> + PCA9450_REG_PWRCTRL = 0x07,
> + PCA9450_REG_RESET_CTRL = 0x08,
> + PCA9450_REG_CONFIG1 = 0x09,
> + PCA9450_REG_CONFIG2 = 0x0A,
> + PCA9450_REG_BUCK123_DVS = 0x0C,
> + PCA9450_REG_BUCK1OUT_LIMIT = 0x0D,
> + PCA9450_REG_BUCK2OUT_LIMIT = 0x0E,
> + PCA9450_REG_BUCK3OUT_LIMIT = 0x0F,
> + PCA9450_REG_BUCK1CTRL = 0x10,
> + PCA9450_REG_BUCK1OUT_DVS0 = 0x11,
> + PCA9450_REG_BUCK1OUT_DVS1 = 0x12,
> + PCA9450_REG_BUCK2CTRL = 0x13,
> + PCA9450_REG_BUCK2OUT_DVS0 = 0x14,
> + PCA9450_REG_BUCK2OUT_DVS1 = 0x15,
> + PCA9450_REG_BUCK3CTRL = 0x16,
> + PCA9450_REG_BUCK3OUT_DVS0 = 0x17,
> + PCA9450_REG_BUCK3OUT_DVS1 = 0x18,
> + PCA9450_REG_BUCK4CTRL = 0x19,
> + PCA9450_REG_BUCK4OUT = 0x1A,
> + PCA9450_REG_BUCK5CTRL = 0x1B,
> + PCA9450_REG_BUCK5OUT = 0x1C,
> + PCA9450_REG_BUCK6CTRL = 0x1D,
> + PCA9450_REG_BUCK6OUT = 0x1E,
> + PCA9450_REG_LDO_AD_CTRL = 0x20,
> + PCA9450_REG_LDO1CTRL = 0x21,
> + PCA9450_REG_LDO2CTRL = 0x22,
> + PCA9450_REG_LDO3CTRL = 0x23,
> + PCA9450_REG_LDO4CTRL = 0x24,
> + PCA9450_REG_LDO5CTRL_L = 0x25,
> + PCA9450_REG_LDO5CTRL_H = 0x26,
> + PCA9450_REG_LOADSW_CTRL = 0x2A,
> + PCA9450_REG_VRFLT1_STS = 0x2B,
> + PCA9450_REG_VRFLT2_STS = 0x2C,
> + PCA9450_REG_VRFLT1_MASK = 0x2D,
> + PCA9450_REG_VRFLT2_MASK = 0x2E,
> + PCA9450_MAX_REGISTER = 0x2F,
> +};
> +
> +/* PCA9450 BUCK ENMODE bits */
> +#define BUCK_ENMODE_OFF 0x00
> +#define BUCK_ENMODE_ONREQ 0x01
> +#define BUCK_ENMODE_ONREQ_STBYREQ 0x02
> +#define BUCK_ENMODE_ON 0x03
> +
> +/* PCA9450_REG_BUCK1_CTRL bits */
> +#define BUCK1_RAMP_MASK 0xC0
> +#define BUCK1_RAMP_25MV 0x0
> +#define BUCK1_RAMP_12P5MV 0x1
> +#define BUCK1_RAMP_6P25MV 0x2
> +#define BUCK1_RAMP_3P125MV 0x3
> +#define BUCK1_DVS_CTRL 0x10
> +#define BUCK1_AD 0x08
> +#define BUCK1_FPWM 0x04
> +#define BUCK1_ENMODE_MASK 0x03
> +
> +/* PCA9450_REG_BUCK2_CTRL bits */
> +#define BUCK2_RAMP_MASK 0xC0
> +#define BUCK2_RAMP_25MV 0x0
> +#define BUCK2_RAMP_12P5MV 0x1
> +#define BUCK2_RAMP_6P25MV 0x2
> +#define BUCK2_RAMP_3P125MV 0x3
> +#define BUCK2_DVS_CTRL 0x10
> +#define BUCK2_AD 0x08
> +#define BUCK2_FPWM 0x04
> +#define BUCK2_ENMODE_MASK 0x03
> +
> +/* PCA9450_REG_BUCK3_CTRL bits */
> +#define BUCK3_RAMP_MASK 0xC0
> +#define BUCK3_RAMP_25MV 0x0
> +#define BUCK3_RAMP_12P5MV 0x1
> +#define BUCK3_RAMP_6P25MV 0x2
> +#define BUCK3_RAMP_3P125MV 0x3
> +#define BUCK3_DVS_CTRL 0x10
> +#define BUCK3_AD 0x08
> +#define BUCK3_FPWM 0x04
> +#define BUCK3_ENMODE_MASK 0x03
> +
> +/* PCA9450_REG_BUCK4_CTRL bits */
> +#define BUCK4_AD 0x08
> +#define BUCK4_FPWM 0x04
> +#define BUCK4_ENMODE_MASK 0x03
> +
> +/* PCA9450_REG_BUCK5_CTRL bits */
> +#define BUCK5_AD 0x08
> +#define BUCK5_FPWM 0x04
> +#define BUCK5_ENMODE_MASK 0x03
> +
> +/* PCA9450_REG_BUCK6_CTRL bits */
> +#define BUCK6_AD 0x08
> +#define BUCK6_FPWM 0x04
> +#define BUCK6_ENMODE_MASK 0x03
> +
> +/* PCA9450_BUCK1OUT_DVS0 bits */
> +#define BUCK1OUT_DVS0_MASK 0x7F
> +#define BUCK1OUT_DVS0_DEFAULT 0x14
> +
> +/* PCA9450_BUCK1OUT_DVS1 bits */
> +#define BUCK1OUT_DVS1_MASK 0x7F
> +#define BUCK1OUT_DVS1_DEFAULT 0x14
> +
> +/* PCA9450_BUCK2OUT_DVS0 bits */
> +#define BUCK2OUT_DVS0_MASK 0x7F
> +#define BUCK2OUT_DVS0_DEFAULT 0x14
> +
> +/* PCA9450_BUCK2OUT_DVS1 bits */
> +#define BUCK2OUT_DVS1_MASK 0x7F
> +#define BUCK2OUT_DVS1_DEFAULT 0x14
> +
> +/* PCA9450_BUCK3OUT_DVS0 bits */
> +#define BUCK3OUT_DVS0_MASK 0x7F
> +#define BUCK3OUT_DVS0_DEFAULT 0x14
> +
> +/* PCA9450_BUCK3OUT_DVS1 bits */
> +#define BUCK3OUT_DVS1_MASK 0x7F
> +#define BUCK3OUT_DVS1_DEFAULT 0x14
> +
> +/* PCA9450_REG_BUCK4OUT bits */
> +#define BUCK4OUT_MASK 0x7F
> +#define BUCK4OUT_DEFAULT 0x6C
> +
> +/* PCA9450_REG_BUCK5OUT bits */
> +#define BUCK5OUT_MASK 0x7F
> +#define BUCK5OUT_DEFAULT 0x30
> +
> +/* PCA9450_REG_BUCK6OUT bits */
> +#define BUCK6OUT_MASK 0x7F
> +#define BUCK6OUT_DEFAULT 0x14
> +
> +/* PCA9450_REG_LDO1_VOLT bits */
> +#define LDO1_EN_MASK 0xC0
> +#define LDO1OUT_MASK 0x07
> +
> +/* PCA9450_REG_LDO2_VOLT bits */
> +#define LDO2_EN_MASK 0xC0
> +#define LDO2OUT_MASK 0x07
> +
> +/* PCA9450_REG_LDO3_VOLT bits */
> +#define LDO3_EN_MASK 0xC0
> +#define LDO3OUT_MASK 0x0F
> +
> +/* PCA9450_REG_LDO4_VOLT bits */
> +#define LDO4_EN_MASK 0xC0
> +#define LDO4OUT_MASK 0x0F
> +
> +/* PCA9450_REG_LDO5_VOLT bits */
> +#define LDO5L_EN_MASK 0xC0
> +#define LDO5LOUT_MASK 0x0F
> +
> +#define LDO5H_EN_MASK 0xC0
> +#define LDO5HOUT_MASK 0x0F
> +
> +/* PCA9450_REG_IRQ bits */
> +#define IRQ_PWRON 0x80
> +#define IRQ_WDOGB 0x40
> +#define IRQ_RSVD 0x20
> +#define IRQ_VR_FLT1 0x10
> +#define IRQ_VR_FLT2 0x08
> +#define IRQ_LOWVSYS 0x04
> +#define IRQ_THERM_105 0x02
> +#define IRQ_THERM_125 0x01
> +
> +#endif /* __LINUX_REG_PCA9450_H__ */
>
