Add device tree binding information for sy8827n regulator driver. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx> --- .../bindings/regulator/silergy,sy8827n.yaml | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml new file mode 100644 index 000000000000..15983cdc7c28 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/silergy,sy8827n.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy8827n PMIC + +maintainers: + - Jisheng Zhang <jszhang@xxxxxxxxxx> + +properties: + compatible: + enum: + - silergy,sy8827n + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to enable/disable the regulator. + maxItems: 1 + + silergy,vsel-state-high: + type: boolean + description: + Indicates if the VSEL pin is set to high. + If this property is missing, assume the VSEL pin is set to low. + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@60 { + compatible = "silergy,sy8827n"; + reg = <0x60>; + }; + }; + +... -- 2.27.0
