On Thu, Jun 25, 2020 at 6:18 PM Enric Balletbo i Serra
<enric.balletbo@xxxxxxxxxxxxx> wrote:
>
> Also known as the Lenovo IdeaPad Duet Chromebook.
>
> There are different krane boards with shared resources, hence a
> mt8183-kukui-krane.dtsi was created for easily introduce future new
> boards. The same happens with the baseboard codenamed kukui where
> different variants, apart from kukui variant can take advantage of the
> shared resources.
>
> Signed-off-by: Ben Ho <Ben.Ho@xxxxxxxxxxxx>
> [originally created by Ben Ho but adapted and ported to mainline]
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Tested-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> ---
>
> Changes in v2:
> - Move adding #phy-cells out of this patch. (Matthias Brugger)
>
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> .../mediatek/mt8183-kukui-krane-sku176.dts | 18 +
> .../boot/dts/mediatek/mt8183-kukui-krane.dtsi | 343 ++++++++
> .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 788 ++++++++++++++++++
> 4 files changed, 1150 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 848218f55bc1d..708fc60fa589a 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -12,4 +12,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> new file mode 100644
> index 0000000000000..47113e275cb52
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2019 Google LLC
> + *
> + * Device-tree for Krane sku176.
> + *
> + * SKU is a 8-bit value (0xb0 == 176):
> + * - Bits 7..4: Panel ID: 0xb (BOE)
> + * - Bits 3..0: SKU ID: 0x0 (default)
> + */
> +
> +/dts-v1/;
> +#include "mt8183-kukui-krane.dtsi"
> +
> +/ {
> + model = "MediaTek krane sku176 board";
> + compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
> new file mode 100644
> index 0000000000000..fbc471ccf805f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
> @@ -0,0 +1,343 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2019 Google LLC
> + */
> +
> +#include "mt8183-kukui.dtsi"
> +
> +/ {
> + ppvarn_lcd: ppvarn-lcd {
> + compatible = "regulator-fixed";
> + regulator-name = "ppvarn_lcd";
> + pinctrl-names = "default";
> + pinctrl-0 = <&ppvarn_lcd_en>;
> +
> + enable-active-high;
> +
> + gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
> + };
> +
> + ppvarp_lcd: ppvarp-lcd {
> + compatible = "regulator-fixed";
> + regulator-name = "ppvarp_lcd";
> + pinctrl-names = "default";
> + pinctrl-0 = <&ppvarp_lcd_en>;
> +
> + enable-active-high;
> +
> + gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
> + };
> +
> + pp1800_lcd: pp1800-lcd {
> + compatible = "regulator-fixed";
> + regulator-name = "pp1800_lcd";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pp1800_lcd_en>;
> +
> + enable-active-high;
> +
> + gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&bluetooth {
> + firmware-name = "nvm_00440302_i2s_eu.bin";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + touchscreen4: touchscreen@5d {
> + compatible = "hid-over-i2c";
> + reg = <0x5d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&open_touch>;
> +
> + interrupt-parent = <&pio>;
> + interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
> +
> + post-power-on-delay-ms = <10>;
> + hid-descr-addr = <0x0001>;
> + };
> +};
> +
> +&mt6358_vcama2_reg {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pins>;
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + eeprom@58 {
> + compatible = "atmel,24c32";
> + reg = <0x58>;
> + pagesize = <32>;
> + };
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4_pins>;
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + eeprom@54 {
> + compatible = "atmel,24c32";
> + reg = <0x54>;
> + pagesize = <32>;
> + };
> +};
> +
> +&pio {
> + /* 192 lines */
> + gpio-line-names =
> + "SPI_AP_EC_CS_L",
> + "SPI_AP_EC_MOSI",
> + "SPI_AP_EC_CLK",
> + "I2S3_DO",
> + "USB_PD_INT_ODL",
> + "",
> + "",
> + "",
> + "",
> + "IT6505_HPD_L",
> + "I2S3_TDM_D3",
> + "SOC_I2C6_1V8_SCL",
> + "SOC_I2C6_1V8_SDA",
> + "DPI_D0",
> + "DPI_D1",
> + "DPI_D2",
> + "DPI_D3",
> + "DPI_D4",
> + "DPI_D5",
> + "DPI_D6",
> + "DPI_D7",
> + "DPI_D8",
> + "DPI_D9",
> + "DPI_D10",
> + "DPI_D11",
> + "DPI_HSYNC",
> + "DPI_VSYNC",
> + "DPI_DE",
> + "DPI_CK",
> + "AP_MSDC1_CLK",
> + "AP_MSDC1_DAT3",
> + "AP_MSDC1_CMD",
> + "AP_MSDC1_DAT0",
> + "AP_MSDC1_DAT2",
> + "AP_MSDC1_DAT1",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "OTG_EN",
> + "DRVBUS",
> + "DISP_PWM",
> + "DSI_TE",
> + "LCM_RST_1V8",
> + "AP_CTS_WIFI_RTS",
> + "AP_RTS_WIFI_CTS",
> + "SOC_I2C5_1V8_SCL",
> + "SOC_I2C5_1V8_SDA",
> + "SOC_I2C3_1V8_SCL",
> + "SOC_I2C3_1V8_SDA",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "SOC_I2C1_1V8_SDA",
> + "SOC_I2C0_1V8_SDA",
> + "SOC_I2C0_1V8_SCL",
> + "SOC_I2C1_1V8_SCL",
> + "AP_SPI_H1_MISO",
> + "AP_SPI_H1_CS_L",
> + "AP_SPI_H1_MOSI",
> + "AP_SPI_H1_CLK",
> + "I2S5_BCK",
> + "I2S5_LRCK",
> + "I2S5_DO",
> + "BOOTBLOCK_EN_L",
> + "MT8183_KPCOL0",
> + "SPI_AP_EC_MISO",
> + "UART_DBG_TX_AP_RX",
> + "UART_AP_TX_DBG_RX",
> + "I2S2_MCK",
> + "I2S2_BCK",
> + "CLK_5M_WCAM",
> + "CLK_2M_UCAM",
> + "I2S2_LRCK",
> + "I2S2_DI",
> + "SOC_I2C2_1V8_SCL",
> + "SOC_I2C2_1V8_SDA",
> + "SOC_I2C4_1V8_SCL",
> + "SOC_I2C4_1V8_SDA",
> + "",
> + "SCL8",
> + "SDA8",
> + "FCAM_PWDN_L",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "I2S_PMIC",
> + "I2S_PMIC",
> + "I2S_PMIC",
> + "I2S_PMIC",
> + "I2S_PMIC",
> + "I2S_PMIC",
> + "I2S_PMIC",
> + "I2S_PMIC",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + /*
> + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
> + * call it BIOS_FLASH_WP_R_L.
> + */
> + "AP_FLASH_WP_L",
> + "EC_AP_INT_ODL",
> + "IT6505_INT_ODL",
> + "H1_INT_OD_L",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "AP_SPI_FLASH_MISO",
> + "AP_SPI_FLASH_CS_L",
> + "AP_SPI_FLASH_MOSI",
> + "AP_SPI_FLASH_CLK",
> + "DA7219_IRQ",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "",
> + "";
> +
> + ppvarp_lcd_en: ppvarp-lcd-en {
> + pins1 {
> + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
> + output-low;
> + };
> + };
> +
> + ppvarn_lcd_en: ppvarn-lcd-en {
> + pins1 {
> + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
> + output-low;
> + };
> + };
> +
> + pp1800_lcd_en: pp1800-lcd-en {
> + pins1 {
> + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
> + output-low;
> + };
> + };
> +
> + open_touch: open_touch {
> + irq_pin {
> + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + rst_pin {
> + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
> +
> + /*
> + * The pen driver doesn't currently support driving
> + * this reset line. By specifying output-high here
> + * we're relying on the fact that this pin has a default
> + * pulldown at boot (which makes sure the pen was in
> + * reset if it was powered) and then we set it high here
> + * to take it out of reset. Better would be if the pen
> + * driver could control this and we could remove
> + * "output-high" here.
> + */
> + output-high;
> + };
> + };
> +};
> +
> +&qca_wifi {
> + qcom,ath10k-calibration-variant = "LE_Krane";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> new file mode 100644
> index 0000000000000..f0a070535b340
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -0,0 +1,788 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Ben Ho <ben.ho@xxxxxxxxxxxx>
> + * Erin Lo <erin.lo@xxxxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "mt8183.dtsi"
> +#include "mt6358.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x80000000>;
> + };
> +
> + clk32k: oscillator1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "clk32k";
> + };
> +
> + it6505_pp18_reg: regulator0 {
> + compatible = "regulator-fixed";
> + regulator-name = "it6505_pp18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + gpio = <&pio 178 0>;
> + enable-active-high;
> + };
> +
> + lcd_pp3300: regulator1 {
> + compatible = "regulator-fixed";
> + regulator-name = "lcd_pp3300";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + bl_pp5000: regulator2 {
> + compatible = "regulator-fixed";
> + regulator-name = "bl_pp5000";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + mmc1_fixed_power: regulator3 {
> + compatible = "regulator-fixed";
> + regulator-name = "mmc1_power";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + mmc1_fixed_io: regulator4 {
> + compatible = "regulator-fixed";
> + regulator-name = "mmc1_io";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pp1800_alw: regulator5 {
> + compatible = "regulator-fixed";
> + regulator-name = "pp1800_alw";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pp3300_alw: regulator6 {
> + compatible = "regulator-fixed";
> + regulator-name = "pp3300_alw";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + max98357a: codec0 {
> + compatible = "maxim,max98357a";
> + sdmode-gpios = <&pio 175 0>;
> + };
> +
> + btsco: codec1 {
> + compatible = "linux,bt-sco";
> + };
> +
> + wifi_pwrseq: wifi-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_pins_pwrseq>;
> +
> + /* Toggle WIFI_ENABLE to reset the chip. */
> + reset-gpios = <&pio 119 1>;
> + };
> +
> + wifi_wakeup: wifi-wakeup {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_pins_wakeup>;
> +
> + wowlan {
> + label = "Wake on WiFi";
> + gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
> + linux,code = <KEY_WAKEUP>;
> + wakeup-source;
> + };
> + };
> +
> + tboard_thermistor1: thermal-sensor1 {
> + compatible = "generic-adc-thermal";
> + #thermal-sensor-cells = <0>;
> + io-channels = <&auxadc 0>;
> + io-channel-names = "sensor-channel";
> + temperature-lookup-table = < (-5000) 4241
> + 0 4063
> + 5000 3856
> + 10000 3621
> + 15000 3364
> + 20000 3091
> + 25000 2810
> + 30000 2526
> + 35000 2247
> + 40000 1982
> + 45000 1734
> + 50000 1507
> + 55000 1305
> + 60000 1122
> + 65000 964
> + 70000 827
> + 75000 710
> + 80000 606
> + 85000 519
> + 90000 445
> + 95000 382
> + 100000 330
> + 105000 284
> + 110000 245
> + 115000 213
> + 120000 183
> + 125000 161>;
> + };
> +
> + tboard_thermistor2: thermal-sensor2 {
> + compatible = "generic-adc-thermal";
> + #thermal-sensor-cells = <0>;
> + io-channels = <&auxadc 1>;
> + io-channel-names = "sensor-channel";
> + temperature-lookup-table = < (-5000) 4241
> + 0 4063
> + 5000 3856
> + 10000 3621
> + 15000 3364
> + 20000 3091
> + 25000 2810
> + 30000 2526
> + 35000 2247
> + 40000 1982
> + 45000 1734
> + 50000 1507
> + 55000 1305
> + 60000 1122
> + 65000 964
> + 70000 827
> + 75000 710
> + 80000 606
> + 85000 519
> + 90000 445
> + 95000 382
> + 100000 330
> + 105000 284
> + 110000 245
> + 115000 213
> + 120000 183
> + 125000 161>;
> + };
> +};
> +
> +&auxadc {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + proc-supply = <&mt6358_vproc12_reg>;
> +};
> +
> +&cpu1 {
> + proc-supply = <&mt6358_vproc12_reg>;
> +};
> +
> +&cpu2 {
> + proc-supply = <&mt6358_vproc12_reg>;
> +};
> +
> +&cpu3 {
> + proc-supply = <&mt6358_vproc12_reg>;
> +};
> +
> +&cpu4 {
> + proc-supply = <&mt6358_vproc11_reg>;
> +};
> +
> +&cpu5 {
> + proc-supply = <&mt6358_vproc11_reg>;
> +};
> +
> +&cpu6 {
> + proc-supply = <&mt6358_vproc11_reg>;
> +};
> +
> +&cpu7 {
> + proc-supply = <&mt6358_vproc11_reg>;
> +};
> +
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> + status = "okay";
> + clock-frequency = <400000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> + status = "okay";
> + clock-frequency = <100000>;
> +};
> +
> +&i2c3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c3_pins>;
> + status = "okay";
> + clock-frequency = <100000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +};
> +
> +&i2c5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c5_pins>;
> + status = "okay";
> + clock-frequency = <100000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +};
> +
> +&i2c6 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c6_pins>;
> + status = "okay";
> + clock-frequency = <100000>;
> +};
> +
> +&mmc0 {
> + status = "okay";
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc0_pins_default>;
> + pinctrl-1 = <&mmc0_pins_uhs>;
> + bus-width = <8>;
> + max-frequency = <200000000>;
> + cap-mmc-highspeed;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + cap-mmc-hw-reset;
> + no-sdio;
> + no-sd;
> + hs400-ds-delay = <0x12814>;
> + vmmc-supply = <&mt6358_vemc_reg>;
> + vqmmc-supply = <&mt6358_vio18_reg>;
> + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>;
> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>;
> + non-removable;
> +};
> +
> +&mmc1 {
> + status = "okay";
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc1_pins_default>;
> + pinctrl-1 = <&mmc1_pins_uhs>;
> + vmmc-supply = <&mmc1_fixed_power>;
> + vqmmc-supply = <&mmc1_fixed_io>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + bus-width = <4>;
> + max-frequency = <200000000>;
> + drv-type = <2>;
> + cap-sd-highspeed;
> + sd-uhs-sdr50;
> + sd-uhs-sdr104;
> + keep-power-in-suspend;
> + enable-sdio-wakeup;
> + cap-sdio-irq;
> + non-removable;
> + no-mmc;
> + no-sd;
> + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>;
> + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + qca_wifi: qca-wifi@1 {
> + compatible = "qcom,ath10k";
> + reg = <1>;
> + };
> +};
> +
> +&mt6358_vdram2_reg {
> + regulator-always-on;
> +};
> +
> +&mt6358codec {
> + Avdd-supply = <&mt6358_vaud28_reg>;
> +};
> +
> +&mt6358_vsim1_reg {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> +};
> +
> +&mt6358_vsim2_reg {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> +};
> +
> +&pio {
> + bt_pins: bt-pins {
> + pins_bt_en {
> + pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
> + output-low;
> + };
> + };
> +
> + ec_ap_int_odl: ec_ap_int_odl {
> + pins1 {
> + pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
> + input-enable;
> + bias-pull-up;
> + };
> + };
> +
> + h1_int_od_l: h1_int_od_l {
> + pins1 {
> + pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
> + input-enable;
> + };
> + };
> +
> + i2c0_pins: i2c0 {
> + pins_bus {
> + pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
> + <PINMUX_GPIO83__FUNC_SCL0>;
> + mediatek,pull-up-adv = <3>;
> + mediatek,drive-strength-adv = <00>;
> + };
> + };
> +
> + i2c1_pins: i2c1 {
> + pins_bus {
> + pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
> + <PINMUX_GPIO84__FUNC_SCL1>;
> + mediatek,pull-up-adv = <3>;
> + mediatek,drive-strength-adv = <00>;
> + };
> + };
> +
> + i2c2_pins: i2c2 {
> + pins_bus {
> + pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
> + <PINMUX_GPIO104__FUNC_SDA2>;
> + bias-disable;
> + mediatek,drive-strength-adv = <00>;
> + };
> + };
> +
> + i2c3_pins: i2c3 {
> + pins_bus {
> + pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
> + <PINMUX_GPIO51__FUNC_SDA3>;
> + mediatek,pull-up-adv = <3>;
> + mediatek,drive-strength-adv = <00>;
> + };
> + };
> +
> + i2c4_pins: i2c4 {
> + pins_bus {
> + pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
> + <PINMUX_GPIO106__FUNC_SDA4>;
> + bias-disable;
> + mediatek,drive-strength-adv = <00>;
> + };
> + };
> +
> + i2c5_pins: i2c5 {
> + pins_bus {
> + pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
> + <PINMUX_GPIO49__FUNC_SDA5>;
> + mediatek,pull-up-adv = <3>;
> + mediatek,drive-strength-adv = <00>;
> + };
> + };
> +
> + i2c6_pins: i2c6 {
> + pins_bus {
> + pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
> + <PINMUX_GPIO12__FUNC_SDA6>;
> + bias-disable;
> + };
> + };
> +
> + mmc0_pins_default: mmc0-pins-default {
> + pins_cmd_dat {
> + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
> + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
> + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
> + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
> + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
> + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
> + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
> + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
> + <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_14mA>;
> + mediatek,pull-up-adv = <01>;
> + };
> +
> + pins_clk {
> + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
> + drive-strength = <MTK_DRIVE_14mA>;
> + mediatek,pull-down-adv = <10>;
> + };
> +
> + pins_rst {
> + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
> + drive-strength = <MTK_DRIVE_14mA>;
> + mediatek,pull-down-adv = <01>;
> + };
> + };
> +
> + mmc0_pins_uhs: mmc0-pins-uhs {
> + pins_cmd_dat {
> + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
> + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
> + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
> + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
> + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
> + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
> + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
> + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
> + <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_14mA>;
> + mediatek,pull-up-adv = <01>;
> + };
> +
> + pins_clk {
> + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
> + drive-strength = <MTK_DRIVE_14mA>;
> + mediatek,pull-down-adv = <10>;
> + };
> +
> + pins_ds {
> + pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
> + drive-strength = <MTK_DRIVE_14mA>;
> + mediatek,pull-down-adv = <10>;
> + };
> +
> + pins_rst {
> + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
> + drive-strength = <MTK_DRIVE_14mA>;
> + mediatek,pull-up-adv = <01>;
> + };
> + };
> +
> + mmc1_pins_default: mmc1-pins-default {
> + pins_cmd_dat {
> + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
> + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
> + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
> + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
> + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
> + input-enable;
> + mediatek,pull-up-adv = <10>;
> + };
> +
> + pins_clk {
> + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
> + input-enable;
> + mediatek,pull-down-adv = <10>;
> + };
> + };
> +
> + mmc1_pins_uhs: mmc1-pins-uhs {
> + pins_cmd_dat {
> + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
> + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
> + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
> + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
> + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
> + drive-strength = <MTK_DRIVE_6mA>;
> + input-enable;
> + mediatek,pull-up-adv = <10>;
> + };
> +
> + pins_clk {
> + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + mediatek,pull-down-adv = <10>;
> + input-enable;
> + };
> + };
> +
> + spi0_pins: spi0 {
> + pins_spi{
> + pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
> + <PINMUX_GPIO86__FUNC_GPIO86>,
> + <PINMUX_GPIO87__FUNC_SPI0_MO>,
> + <PINMUX_GPIO88__FUNC_SPI0_CLK>;
> + bias-disable;
> + };
> + };
> +
> + spi1_pins: spi1 {
> + pins_spi{
> + pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
> + <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
> + <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
> + <PINMUX_GPIO164__FUNC_SPI1_A_CLK>;
> + bias-disable;
> + };
> + };
> +
> + spi2_pins: spi2 {
> + pins_spi{
> + pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
> + <PINMUX_GPIO1__FUNC_SPI2_MO>,
> + <PINMUX_GPIO2__FUNC_SPI2_CLK>;
> + bias-disable;
> + };
> + pins_spi_mi {
> + pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
> + mediatek,pull-down-adv = <00>;
> + };
> + };
> +
> + spi3_pins: spi3 {
> + pins_spi{
> + pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
> + <PINMUX_GPIO22__FUNC_SPI3_CSB>,
> + <PINMUX_GPIO23__FUNC_SPI3_MO>,
> + <PINMUX_GPIO24__FUNC_SPI3_CLK>;
> + bias-disable;
> + };
> + };
> +
> + spi4_pins: spi4 {
> + pins_spi{
> + pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
> + <PINMUX_GPIO18__FUNC_SPI4_CSB>,
> + <PINMUX_GPIO19__FUNC_SPI4_MO>,
> + <PINMUX_GPIO20__FUNC_SPI4_CLK>;
> + bias-disable;
> + };
> + };
> +
> + spi5_pins: spi5 {
> + pins_spi{
> + pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
> + <PINMUX_GPIO14__FUNC_SPI5_CSB>,
> + <PINMUX_GPIO15__FUNC_SPI5_MO>,
> + <PINMUX_GPIO16__FUNC_SPI5_CLK>;
> + bias-disable;
> + };
> + };
> +
> + uart0_pins_default: uart0-pins-default {
> + pins_rx {
> + pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
> + input-enable;
> + bias-pull-up;
> + };
> + pins_tx {
> + pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
> + };
> + };
> +
> + uart1_pins_default: uart1-pins-default {
> + pins_rx {
> + pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
> + input-enable;
> + bias-pull-up;
> + };
> + pins_tx {
> + pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
> + };
> + pins_rts {
> + pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
> + output-enable;
> + };
> + pins_cts {
> + pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
> + input-enable;
> + };
> + };
> +
> + uart1_pins_sleep: uart1-pins-sleep {
> + pins_rx {
> + pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
> + input-enable;
> + bias-pull-up;
> + };
> + pins_tx {
> + pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
> + };
> + pins_rts {
> + pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
> + output-enable;
> + };
> + pins_cts {
> + pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
> + input-enable;
> + };
> + };
> +
> + wifi_pins_pwrseq: wifi-pins-pwrseq {
> + pins_wifi_enable {
> + pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
> + output-low;
> + };
> + };
> +
> + wifi_pins_wakeup: wifi-pins-wakeup {
> + pins_wifi_wakeup {
> + pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
> + input-enable;
> + };
> + };
> +};
> +
> +&soc_data {
> + status = "okay";
> +};
> +
> +&spi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi0_pins>;
> + mediatek,pad-select = <0>;
> + status = "okay";
> + cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
> +
> + cr50@0 {
> + compatible = "google,cr50";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&h1_int_od_l>;
> + interrupt-parent = <&pio>;
> + interrupts = <153 IRQ_TYPE_EDGE_RISING>;
> + };
> +};
> +
> +&spi1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi1_pins>;
> + mediatek,pad-select = <0>;
> + status = "okay";
> +
> + w25q64dw: spi-flash@0 {
> + compatible = "winbond,w25q64dw", "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <25000000>;
> + };
> +};
> +
> +&spi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi2_pins>;
> + mediatek,pad-select = <0>;
> + status = "okay";
> +
> + cros_ec: cros-ec@0 {
> + compatible = "google,cros-ec-spi";
> + reg = <0>;
> + spi-max-frequency = <3000000>;
> + interrupt-parent = <&pio>;
> + interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ec_ap_int_odl>;
> +
> + i2c_tunnel: i2c-tunnel {
> + compatible = "google,cros-ec-i2c-tunnel";
> + google,remote-bus = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + usbc_extcon: extcon0 {
> + compatible = "google,extcon-usbc-cros-ec";
> + google,usb-port-id = <0>;
> + };
> + };
> +};
> +
> +&spi3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi3_pins>;
> + mediatek,pad-select = <0>;
> + status = "disabled";
> +};
> +
> +&spi4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi4_pins>;
> + mediatek,pad-select = <0>;
> + status = "disabled";
> +};
> +
> +&spi5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi5_pins>;
> + mediatek,pad-select = <0>;
> + status = "disabled";
> +};
> +
> +&ssusb {
> + dr_mode = "host";
> + wakeup-source;
> + vusb33-supply = <&mt6358_vusb_reg>;
> + status = "okay";
> +};
> +
> +&u3phy {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_default>;
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&uart1_pins_default>;
> + pinctrl-1 = <&uart1_pins_sleep>;
> + status = "okay";
> + interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>,
> + <&pio 121 IRQ_TYPE_EDGE_FALLING>;
> +
> + bluetooth: bluetooth {
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_pins>;
> + status = "okay";
> + compatible = "qcom,qca6174-bt";
> + enable-gpios = <&pio 120 0>;
> + clocks = <&clk32k>;
> + firmware-name = "nvm_00440302_i2s.bin";
> + };
> +};
> +
> +&usb_host {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + vusb33-supply = <&mt6358_vusb_reg>;
> + status = "okay";
> +
> + hub@1 {
> + compatible = "usb5e3,610";
> + reg = <1>;
> + };
> +};
> +
> +#include <arm/cros-ec-keyboard.dtsi>
> +#include <arm/cros-ec-sbs.dtsi>
> --
> 2.27.0
>
