Hi. The first part is to document DT bindings for Keem Bay eMMC PHY. The second is the driver file, loosely based on phy-rockchip-emmc.c and phy-intel-emmc.c. The latter is not being reused as there are quite a number of differences i.e. registers offset, supported clock rates, bitfield to set. The patch was tested with Keem Bay evaluation module board. Thank you. Best regards, Zainie Changes since resend v5: - In keembay_emmc_phy_power(), remove redundant return ret;. Resend v5: - Include missing changes done for phy-keembay-emmc.c (See Changes since v3) Changes since v4: - In Kconfig file, add depends on ARM64 || COMPILE_TEST and depends on OF && HAS_IOMEM. - In Kconfig file, reword the help section to be more verbose. Changes since v3: - Exit keembay_emmc_phy_power() with return ret;. - In keembay_emmc_phy_init(), use PTR_ERR_OR_ZERO(...). - In keembay_emmc_phy_probe(), devm_regmap_init_mmio(...) in single line. Changes since v2: - Modify DT example to use single cell for address and size. Changes since v1: - Rework phy-keembay-emmc.c to make it similar to phy-intel-emmc.c. - Use regmap_mmio, and remove reference to intel,syscon. - Use node name phy@.... - Update license i.e. use dual license. Wan Ahmad Zainie (2): dt-bindings: phy: intel: Add Keem Bay eMMC PHY bindings phy: intel: Add Keem Bay eMMC PHY support .../bindings/phy/intel,keembay-emmc-phy.yaml | 44 +++ drivers/phy/intel/Kconfig | 12 + drivers/phy/intel/Makefile | 1 + drivers/phy/intel/phy-keembay-emmc.c | 314 ++++++++++++++++++ 4 files changed, 371 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/intel,keembay-emmc-phy.yaml create mode 100644 drivers/phy/intel/phy-keembay-emmc.c -- 2.17.1
