On Wed, Jul 1, 2020 at 7:33 AM Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > > Hi Rob, > > On Mon, Jun 29, 2020 at 04:30:11PM -0600, Rob Herring wrote: > > On Mon, 29 Jun 2020 15:00:52 +0300, Laurent Pinchart wrote: > > > From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx> > > > > > > Add DT bindings for the Xilinx ZynqMP PHY. ZynqMP SoCs have a High Speed > > > Processing System Gigabit Transceiver which provides PHY capabilities to > > > USB, SATA, PCIE, Display Port and Ehernet SGMII controllers. > > > > > > Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx> > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > > --- > > > Changes since v8: > > > > > > - Rebase on phy/next > > > > > > Changes since v7: > > > > > > - Switch to GPL-2.0-only OR BSD-2-Clause > > > > > > Changes since v6: > > > > > > - Fixed specification of compatible-dependent xlnx,tx-termination-fix > > > property > > > - Dropped status property from example > > > - Use 4 spaces to indent example > > > > > > Changes since v5: > > > > > > - Document clocks and clock-names properties > > > - Document resets and reset-names properties > > > - Replace subnodes with an additional entry in the PHY cells > > > - Drop lane frequency PHY cell, replaced by reference clock phandle > > > - Convert bindings to YAML > > > - Reword the subject line > > > - Drop Rob's R-b as the bindings have significantly changed > > > - Drop resets and reset-names properties > > > --- > > > .../bindings/phy/xlnx,zynqmp-psgtr.yaml | 105 ++++++++++++++++++ > > > include/dt-bindings/phy/phy.h | 1 + > > > 2 files changed, 106 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml > > > > > > > > > My bot found errors running 'make dt_binding_check' on your patch: > > > > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.example.dt.yaml: example-0: phy@fd400000:reg:0: [0, 4248829952, 0, 262144] is too long > > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.example.dt.yaml: example-0: phy@fd400000:reg:1: [0, 4248633344, 0, 4096] is too long > > > > > > See https://patchwork.ozlabs.org/patch/1319269 > > > > If you already ran 'make dt_binding_check' and didn't see the above > > error(s), then make sure dt-schema is up to date: > > > > pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade > > > > Please check and re-submit. > > Sorry :-S I've updated the schema now. The patch has already been > merged, so I'll submit a fix. No worries, it's a moving target. The check just got added to the schemas. Rob