Re: [PATCH v5 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Vinay.

On Wed, Jul 01, 2020 at 03:14:09PM +0530, Vinay Simha B N wrote:
> sam,
> 
> I rechecked, but did not find any indents are too spaced.
> This is taken from a working dts tree.
> 
            port@1 {
            |   reg = <1>;
            |   dsi0_out: endpoint {
            |       remote-endpoint = <&d2l_in_test>;
            |           data-lanes = <0 1 2 3>;
            |   };
             };
         };
     };
See above, something is wrong with the indent in the examples.


> I had given two examples for a purpose. One for single lvds
> configuration single link mode,
> another is for dual lvds configurations dual-link mode and port mappings.

Please provide a proper description of the single link and dual link
modes in the descriptions of the bindings.
The examples shall support the bindings, they shall not include
information that is not covered in the bindings.

	Sam



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux