Hi Bjorn,
My below patch series (https://patchwork.kernel.org/cover/11545511/)
with all the review comments addressed and this is on top of
Govind's series (https://patchwork.kernel.org/cover/11060629/) "[v5]
"Add non PAS wcss Q6 support for QCS404".
Need your help to know how should I proceed further to merge these
patches.
Regards,
Gokul
On 2020-05-13 15:00, Gokul Sriram Palanisamy wrote:
IPQ8074 needs support for secure pil as well.
Also, currently only unified firmware is supported.
IPQ8074 supports split firmware for q6 and m3, so
adding support for that.
This series is based on Govind's
"[v5] Add non PAS wcss Q6 support for QCS404"
changes since v4:
- Rebased patch 8
changes since v3:
- In patch 10, Added release_firmware to free up
memory requested for m3 firmware.
changes since v2:
- In patch 5, Added a driver data 'bcr_reset_required'
to select if bcr reset is required
- In patch 10, Removed syscon implementation and moved
to mailbox framework to access APCS IPC
changes since v1:
- In patch 10, Addressed minor review comments.
Gokul Sriram Palanisamy (10):
remoteproc: qcom: Add PRNG proxy clock
remoteproc: qcom: Add secure PIL support
remoteproc: qcom: Add support for split q6 + m3 wlan firmware
remoteproc: qcom: Add ssr subdevice identifier
remoteproc: qcom: Update regmap offsets for halt register
dt-bindings: clock: qcom: Add reset for WCSSAON
clk: qcom: Add WCSSAON reset
dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
arm64: dts: Add support for scm on IPQ8074 SoCs
arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
.../devicetree/bindings/firmware/qcom,scm.txt | 1 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 127
+++++++++++++++++
drivers/clk/qcom/gcc-ipq8074.c | 1 +
drivers/remoteproc/qcom_q6v5_wcss.c | 157
+++++++++++++++++----
include/dt-bindings/clock/qcom,gcc-ipq8074.h | 1 +
5 files changed, 258 insertions(+), 29 deletions(-)
