[PATCH] dt-bindings: thermal: Remove soc unit address

[Fabio Estevam <festevam@xxxxxxxxx>]

Remove the soc unit address to fix the following warning seen with
'make dt_binding_check':

Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property

Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
---
 Documentation/devicetree/bindings/thermal/thermal-sensor.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
index fcd25a0af38c..727d04550324 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
@@ -41,7 +41,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     // Example 1: SDM845 TSENS
-    soc: soc@0 {
+    soc: soc {
             #address-cells = <2>;
             #size-cells = <2>;
 
-- 
2.17.1