On Tue, Jun 30, 2020 at 01:52:04AM +0200, Paul Cercueil wrote:
> If you pass a string that is not terminated with a carriage return to
> dev_err(), it will eventually be printed with a carriage return, but
> not right away, since the kernel will wait for a pr_cont().
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
It would have been nice if most was converted to drm_err() and friends
when touching these.
That may come later..
Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
>
> Notes:
> v2: New patch
>
> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 30 +++++++++++------------
> 1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index 16f0740df507..a15f9a1940c6 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -623,14 +623,14 @@ static int ingenic_drm_probe(struct platform_device *pdev)
>
> base = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(base)) {
> - dev_err(dev, "Failed to get memory resource");
> + dev_err(dev, "Failed to get memory resource\n");
> return PTR_ERR(base);
> }
>
> priv->map = devm_regmap_init_mmio(dev, base,
> &ingenic_drm_regmap_config);
> if (IS_ERR(priv->map)) {
> - dev_err(dev, "Failed to create regmap");
> + dev_err(dev, "Failed to create regmap\n");
> return PTR_ERR(priv->map);
> }
>
> @@ -641,21 +641,21 @@ static int ingenic_drm_probe(struct platform_device *pdev)
> if (soc_info->needs_dev_clk) {
> priv->lcd_clk = devm_clk_get(dev, "lcd");
> if (IS_ERR(priv->lcd_clk)) {
> - dev_err(dev, "Failed to get lcd clock");
> + dev_err(dev, "Failed to get lcd clock\n");
> return PTR_ERR(priv->lcd_clk);
> }
> }
>
> priv->pix_clk = devm_clk_get(dev, "lcd_pclk");
> if (IS_ERR(priv->pix_clk)) {
> - dev_err(dev, "Failed to get pixel clock");
> + dev_err(dev, "Failed to get pixel clock\n");
> return PTR_ERR(priv->pix_clk);
> }
>
> ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, &bridge);
> if (ret) {
> if (ret != -EPROBE_DEFER)
> - dev_err(dev, "Failed to get panel handle");
> + dev_err(dev, "Failed to get panel handle\n");
> return ret;
> }
>
> @@ -684,7 +684,7 @@ static int ingenic_drm_probe(struct platform_device *pdev)
> ARRAY_SIZE(ingenic_drm_primary_formats),
> NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
> if (ret) {
> - dev_err(dev, "Failed to register primary plane: %i", ret);
> + dev_err(dev, "Failed to register primary plane: %i\n", ret);
> return ret;
> }
>
> @@ -693,7 +693,7 @@ static int ingenic_drm_probe(struct platform_device *pdev)
> ret = drm_crtc_init_with_planes(drm, &priv->crtc, &priv->primary,
> NULL, &ingenic_drm_crtc_funcs, NULL);
> if (ret) {
> - dev_err(dev, "Failed to init CRTC: %i", ret);
> + dev_err(dev, "Failed to init CRTC: %i\n", ret);
> return ret;
> }
>
> @@ -705,25 +705,25 @@ static int ingenic_drm_probe(struct platform_device *pdev)
> ret = drm_simple_encoder_init(drm, &priv->encoder,
> DRM_MODE_ENCODER_DPI);
> if (ret) {
> - dev_err(dev, "Failed to init encoder: %i", ret);
> + dev_err(dev, "Failed to init encoder: %i\n", ret);
> return ret;
> }
>
> ret = drm_bridge_attach(&priv->encoder, bridge, NULL, 0);
> if (ret) {
> - dev_err(dev, "Unable to attach bridge");
> + dev_err(dev, "Unable to attach bridge\n");
> return ret;
> }
>
> ret = drm_irq_install(drm, irq);
> if (ret) {
> - dev_err(dev, "Unable to install IRQ handler");
> + dev_err(dev, "Unable to install IRQ handler\n");
> return ret;
> }
>
> ret = drm_vblank_init(drm, 1);
> if (ret) {
> - dev_err(dev, "Failed calling drm_vblank_init()");
> + dev_err(dev, "Failed calling drm_vblank_init()\n");
> return ret;
> }
>
> @@ -731,7 +731,7 @@ static int ingenic_drm_probe(struct platform_device *pdev)
>
> ret = clk_prepare_enable(priv->pix_clk);
> if (ret) {
> - dev_err(dev, "Unable to start pixel clock");
> + dev_err(dev, "Unable to start pixel clock\n");
> return ret;
> }
>
> @@ -746,20 +746,20 @@ static int ingenic_drm_probe(struct platform_device *pdev)
> */
> ret = clk_set_rate(priv->lcd_clk, parent_rate);
> if (ret) {
> - dev_err(dev, "Unable to set LCD clock rate");
> + dev_err(dev, "Unable to set LCD clock rate\n");
> goto err_pixclk_disable;
> }
>
> ret = clk_prepare_enable(priv->lcd_clk);
> if (ret) {
> - dev_err(dev, "Unable to start lcd clock");
> + dev_err(dev, "Unable to start lcd clock\n");
> goto err_pixclk_disable;
> }
> }
>
> ret = drm_dev_register(drm, 0);
> if (ret) {
> - dev_err(dev, "Failed to register DRM driver");
> + dev_err(dev, "Failed to register DRM driver\n");
> goto err_devclk_disable;
> }
>
> --
> 2.27.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
