Re: [PATCH 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM

[Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>]

Hi Bjorn,

On 27/05/14 18:28, Bjorn Andersson wrote:
> Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and
> 8064 based devices. The driver exposes resources that child drivers can operate
> on; to implementing regulator, clock and bus frequency drivers.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> ---
>   drivers/mfd/Kconfig          |  15 ++
>   drivers/mfd/Makefile         |   1 +
>   drivers/mfd/qcom_rpm.c       | 575 +++++++++++++++++++++++++++++++++++++++++++
>   include/linux/mfd/qcom_rpm.h |  12 +
>   4 files changed, 603 insertions(+)
>   create mode 100644 drivers/mfd/qcom_rpm.c
>   create mode 100644 include/linux/mfd/qcom_rpm.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3383412..e5122a7 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -482,6 +482,21 @@ config UCB1400_CORE
>   	  To compile this driver as a module, choose M here: the
>   	  module will be called ucb1400_core.
>
> +config MFD_QCOM_RPM
> +	tristate "Qualcomm Resource Power Manager (RPM)
> +	depends on ARCH_QCOM && OF
> +	select MFD_CORE
> +	help
> +	  If you say yes to this option, support will be included for the
> +	  Resource Power Manager system found in the Qualcomm 8660, 8960 and
> +	  8064 based devices.
> +
> +	  This is required to access many regulators, clocks and bus
> +	  frequencies controlled by the RPM on these devices.
> +
> +	  Say M here if you want to include support for the Qualcomm RPM as a
> +	  module. This will build a module called "qcom_rpm".
> +
>   config MFD_PM8XXX
>   	tristate
>
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 2851275..bbe4209 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -150,6 +150,7 @@ obj-$(CONFIG_MFD_SI476X_CORE)	+= si476x-core.o
>
>   obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
>   obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o omap-usb-tll.o
> +obj-$(CONFIG_MFD_QCOM_RPM)	+= qcom_rpm.o
>   obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o ssbi.o
>   obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
>   obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> new file mode 100644
> index 0000000..96135ab
> --- /dev/null
> +++ b/drivers/mfd/qcom_rpm.c
> @@ -0,0 +1,575 @@
> +/*
> + * Copyright (c) 2014, Sony Mobile Communications AB.
> + * Copyright (c) 2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +
> +#include <linux/mfd/qcom_rpm.h>
> +
> +#include <dt-bindings/mfd/qcom_rpm.h>
> +
> +struct qcom_rpm_resource {
> +	unsigned target_id;
> +	unsigned status_id;
> +	unsigned select_id;
> +	unsigned size;
> +};
> +
> +struct qcom_rpm {
> +	struct device *dev;
> +	struct completion ack;
> +	struct mutex lock;
> +
> +	void __iomem *status_regs;
> +	void __iomem *ctrl_regs;
> +	void __iomem *req_regs;
> +
> +	void __iomem *ipc_rpm_reg;
> +
> +	u32 ack_status;
> +
> +	u32 version;
> +
> +	const struct qcom_rpm_resource *resource_table;
> +	unsigned n_resources;

the line spacing looks bit odd.
> +};
> +
> +#define RPM_STATUS_REG(rpm, i)	((rpm)->status_regs + (i) * 4)
> +#define RPM_CTRL_REG(rpm, i)	((rpm)->ctrl_regs + (i) * 4)
> +#define RPM_REQ_REG(rpm, i)	((rpm)->req_regs + (i) * 4)

Probably you could make these macros bit more generic by removing the 
rpm and let the calling code dereference it.

> +
> +#define RPM_REQUEST_TIMEOUT	(5 * HZ)
> +
> +#define RPM_REQUEST_CONTEXT	3
> +#define RPM_REQ_SELECT		11
> +#define RPM_ACK_CONTEXT		15
> +#define RPM_ACK_SELECTOR	23
> +#define RPM_SELECT_SIZE		7
> +
> +#define RPM_ACTIVE_STATE	BIT(0)
> +#define RPM_NOTIFICATION	BIT(30)
> +#define RPM_REJECTED		BIT(31)
> +
> +#define RPM_SIGNAL		BIT(2)
> +
> +static const struct qcom_rpm_resource apq8064_rpm_resource_table[] = {
> +	[QCOM_RPM_CXO_CLK] =			{ 25, 9, 5, 1 },
> +	[QCOM_RPM_PXO_CLK] =			{ 26, 10, 6, 1 },
> +	[QCOM_RPM_APPS_FABRIC_CLK] =		{ 27, 11, 8, 1 },
> +	[QCOM_RPM_SYS_FABRIC_CLK] =		{ 28, 12, 9, 1 },
> +	[QCOM_RPM_MM_FABRIC_CLK] =		{ 29, 13, 10, 1 },
> +	[QCOM_RPM_DAYTONA_FABRIC_CLK] =		{ 30, 14, 11, 1 },
> +	[QCOM_RPM_SFPB_CLK] =			{ 31, 15, 12, 1 },
> +	[QCOM_RPM_CFPB_CLK] =			{ 32, 16, 13, 1 },
> +	[QCOM_RPM_MMFPB_CLK] =			{ 33, 17, 14, 1 },
> +	[QCOM_RPM_EBI1_CLK] =			{ 34, 18, 16, 1 },
> +	[QCOM_RPM_APPS_FABRIC_HALT] =		{ 35, 19, 18, 1 },
> +	[QCOM_RPM_APPS_FABRIC_MODE] =		{ 37, 20, 19, 1 },
> +	[QCOM_RPM_APPS_FABRIC_IOCTL] =		{ 40, 21, 20, 1 },
> +	[QCOM_RPM_APPS_FABRIC_ARB] =		{ 41, 22, 21, 12 },
> +	[QCOM_RPM_SYS_FABRIC_HALT] =		{ 53, 23, 22, 1 },
> +	[QCOM_RPM_SYS_FABRIC_MODE] =		{ 55, 24, 23, 1 },
> +	[QCOM_RPM_SYS_FABRIC_IOCTL] =		{ 58, 25, 24, 1 },
> +	[QCOM_RPM_SYS_FABRIC_ARB] =		{ 59, 26, 25, 30 },
> +	[QCOM_RPM_MM_FABRIC_HALT] =		{ 89, 27, 26, 1 },
> +	[QCOM_RPM_MM_FABRIC_MODE] =		{ 91, 28, 27, 1 },
> +	[QCOM_RPM_MM_FABRIC_IOCTL] =		{ 94, 29, 28, 1 },
> +	[QCOM_RPM_MM_FABRIC_ARB] =		{ 95, 30, 29, 21 },
> +	[QCOM_RPM_PM8921_S1] =			{ 116, 31, 30, 2 },
> +	[QCOM_RPM_PM8921_S2] =			{ 118, 33, 31, 2 },
> +	[QCOM_RPM_PM8921_S3] =			{ 120, 35, 32, 2 },
> +	[QCOM_RPM_PM8921_S4] =			{ 122, 37, 33, 2 },
> +	[QCOM_RPM_PM8921_S5] =			{ 124, 39, 34, 2 },
> +	[QCOM_RPM_PM8921_S6] =			{ 126, 41, 35, 2 },
> +	[QCOM_RPM_PM8921_S7] =			{ 128, 43, 36, 2 },
> +	[QCOM_RPM_PM8921_S8] =			{ 130, 45, 37, 2 },
> +	[QCOM_RPM_PM8921_L1] =			{ 132, 47, 38, 2 },
> +	[QCOM_RPM_PM8921_L2] =			{ 134, 49, 39, 2 },
> +	[QCOM_RPM_PM8921_L3] =			{ 136, 51, 40, 2 },
> +	[QCOM_RPM_PM8921_L4] =			{ 138, 53, 41, 2 },
> +	[QCOM_RPM_PM8921_L5] =			{ 140, 55, 42, 2 },
> +	[QCOM_RPM_PM8921_L6] =			{ 142, 57, 43, 2 },
> +	[QCOM_RPM_PM8921_L7] =			{ 144, 59, 44, 2 },
> +	[QCOM_RPM_PM8921_L8] =			{ 146, 61, 45, 2 },
> +	[QCOM_RPM_PM8921_L9] =			{ 148, 63, 46, 2 },
> +	[QCOM_RPM_PM8921_L10] =			{ 150, 65, 47, 2 },
> +	[QCOM_RPM_PM8921_L11] =			{ 152, 67, 48, 2 },
> +	[QCOM_RPM_PM8921_L12] =			{ 154, 69, 49, 2 },
> +	[QCOM_RPM_PM8921_L13] =			{ 156, 71, 50, 2 },
> +	[QCOM_RPM_PM8921_L14] =			{ 158, 73, 51, 2 },
> +	[QCOM_RPM_PM8921_L15] =			{ 160, 75, 52, 2 },
> +	[QCOM_RPM_PM8921_L16] =			{ 162, 77, 53, 2 },
> +	[QCOM_RPM_PM8921_L17] =			{ 164, 79, 54, 2 },
> +	[QCOM_RPM_PM8921_L18] =			{ 166, 81, 55, 2 },
> +	[QCOM_RPM_PM8921_L19] =			{ 168, 83, 56, 2 },
> +	[QCOM_RPM_PM8921_L20] =			{ 170, 85, 57, 2 },
> +	[QCOM_RPM_PM8921_L21] =			{ 172, 87, 58, 2 },
> +	[QCOM_RPM_PM8921_L22] =			{ 174, 89, 59, 2 },
> +	[QCOM_RPM_PM8921_L23] =			{ 176, 91, 60, 2 },
> +	[QCOM_RPM_PM8921_L24] =			{ 178, 93, 61, 2 },
> +	[QCOM_RPM_PM8921_L25] =			{ 180, 95, 62, 2 },
> +	[QCOM_RPM_PM8921_L26] =			{ 182, 97, 63, 2 },
> +	[QCOM_RPM_PM8921_L27] =			{ 184, 99, 64, 2 },
> +	[QCOM_RPM_PM8921_L28] =			{ 186, 101, 65, 2 },
> +	[QCOM_RPM_PM8921_L29] =			{ 188, 103, 66, 2 },
> +	[QCOM_RPM_PM8921_CLK1] =		{ 190, 105, 67, 2 },
> +	[QCOM_RPM_PM8921_CLK2] =		{ 192, 107, 68, 2 },
> +	[QCOM_RPM_PM8921_LVS1] =		{ 194, 109, 69, 1 },
> +	[QCOM_RPM_PM8921_LVS2] =		{ 195, 110, 70, 1 },
> +	[QCOM_RPM_PM8921_LVS3] =		{ 196, 111, 71, 1 },
> +	[QCOM_RPM_PM8921_LVS4] =		{ 197, 112, 72, 1 },
> +	[QCOM_RPM_PM8921_LVS5] =		{ 198, 113, 73, 1 },
> +	[QCOM_RPM_PM8921_LVS6] =		{ 199, 114, 74, 1 },
> +	[QCOM_RPM_PM8921_LVS7] =		{ 200, 115, 75, 1 },
> +	[QCOM_RPM_PM8821_S1] =			{ 201, 116, 76, 2 },
> +	[QCOM_RPM_PM8821_S2] =			{ 203, 118, 77, 2 },
> +	[QCOM_RPM_PM8821_L1] =			{ 205, 120, 78, 2 },
> +	[QCOM_RPM_PM8921_NCP] =			{ 207, 122, 80, 2 },
> +	[QCOM_RPM_CXO_BUFFERS] =		{ 209, 124, 81, 1 },
> +	[QCOM_RPM_USB_OTG_SWITCH] =		{ 210, 125, 82, 1 },
> +	[QCOM_RPM_HDMI_SWITCH] =		{ 211, 126, 83, 1 },
> +	[QCOM_RPM_DDR_DMM] =			{ 212, 127, 84, 2 },
> +	[QCOM_RPM_VDDMIN_GPIO] =		{ 215, 131, 89, 1 },
> +};
> +
> +static const struct qcom_rpm apq8064_template = {
> +	.version = 3,
> +	.resource_table = apq8064_rpm_resource_table,
> +	.n_resources = ARRAY_SIZE(apq8064_rpm_resource_table),
> +};
> +
> +static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
> +	[QCOM_RPM_CXO_CLK] =			{ 32, 12, 5, 1 },
> +	[QCOM_RPM_PXO_CLK] =			{ 33, 13, 6, 1 },
> +	[QCOM_RPM_PLL_4] =			{ 34, 14, 7, 1 },
> +	[QCOM_RPM_APPS_FABRIC_CLK] =		{ 35, 15, 8, 1 },
> +	[QCOM_RPM_SYS_FABRIC_CLK] =		{ 36, 16, 9, 1 },
> +	[QCOM_RPM_MM_FABRIC_CLK] =		{ 37, 17, 10, 1 },
> +	[QCOM_RPM_DAYTONA_FABRIC_CLK] =		{ 38, 18, 11, 1 },
> +	[QCOM_RPM_SFPB_CLK] =			{ 39, 19, 12, 1 },
> +	[QCOM_RPM_CFPB_CLK] =			{ 40, 20, 13, 1 },
> +	[QCOM_RPM_MMFPB_CLK] =			{ 41, 21, 14, 1 },
> +	[QCOM_RPM_SMI_CLK] =			{ 42, 22, 15, 1 },
> +	[QCOM_RPM_EBI1_CLK] =			{ 43, 23, 16, 1 },
> +	[QCOM_RPM_APPS_L2_CACHE_CTL] =		{ 44, 24, 17, 1 },
> +	[QCOM_RPM_APPS_FABRIC_HALT] =		{ 45, 25, 18, 2 },
> +	[QCOM_RPM_APPS_FABRIC_MODE] =		{ 47, 26, 19, 3 },
> +	[QCOM_RPM_APPS_FABRIC_ARB] =		{ 51, 28, 21, 6 },
> +	[QCOM_RPM_SYS_FABRIC_HALT] =		{ 63, 29, 22, 2 },
> +	[QCOM_RPM_SYS_FABRIC_MODE] =		{ 65, 30, 23, 3 },
> +	[QCOM_RPM_SYS_FABRIC_ARB] =		{ 69, 32, 25, 22 },
> +	[QCOM_RPM_MM_FABRIC_HALT] =		{ 105, 33, 26, 2 },
> +	[QCOM_RPM_MM_FABRIC_MODE] =		{ 107, 34, 27, 3 },
> +	[QCOM_RPM_MM_FABRIC_ARB] =		{ 111, 36, 29, 23 },
> +	[QCOM_RPM_PM8901_SMPS0] =		{ 134, 37, 30, 2 },
> +	[QCOM_RPM_PM8901_SMPS1] =		{ 136, 39, 31, 2 },
> +	[QCOM_RPM_PM8901_SMPS2] =		{ 138, 41, 32, 2 },
> +	[QCOM_RPM_PM8901_SMPS3] =		{ 140, 43, 33, 2 },
> +	[QCOM_RPM_PM8901_SMPS4] =		{ 142, 45, 34, 2 },
> +	[QCOM_RPM_PM8901_LDO0] =		{ 144, 47, 35, 2 },
> +	[QCOM_RPM_PM8901_LDO1] =		{ 146, 49, 36, 2 },
> +	[QCOM_RPM_PM8901_LDO2] =		{ 148, 51, 37, 2 },
> +	[QCOM_RPM_PM8901_LDO3] =		{ 150, 53, 38, 2 },
> +	[QCOM_RPM_PM8901_LDO4] =		{ 152, 55, 39, 2 },
> +	[QCOM_RPM_PM8901_LDO5] =		{ 154, 57, 40, 2 },
> +	[QCOM_RPM_PM8901_LDO6] =		{ 156, 59, 41, 2 },
> +	[QCOM_RPM_PM8901_LVS0] =		{ 158, 61, 42, 1 },
> +	[QCOM_RPM_PM8901_LVS1] =		{ 159, 62, 43, 1 },
> +	[QCOM_RPM_PM8901_LVS2] =		{ 160, 63, 44, 1 },
> +	[QCOM_RPM_PM8901_LVS3] =		{ 161, 64, 45, 1 },
> +	[QCOM_RPM_PM8901_MVS] =			{ 162, 65, 46, 1 },
> +	[QCOM_RPM_PM8058_SMPS0] =		{ 163, 66, 47, 2 },
> +	[QCOM_RPM_PM8058_SMPS1] =		{ 165, 68, 48, 2 },
> +	[QCOM_RPM_PM8058_SMPS2] =		{ 167, 70, 49, 2 },
> +	[QCOM_RPM_PM8058_SMPS3] =		{ 169, 72, 50, 2 },
> +	[QCOM_RPM_PM8058_SMPS4] =		{ 171, 74, 51, 2 },
> +	[QCOM_RPM_PM8058_LDO0] =		{ 173, 76, 52, 2 },
> +	[QCOM_RPM_PM8058_LDO1] =		{ 175, 78, 53, 2 },
> +	[QCOM_RPM_PM8058_LDO2] =		{ 177, 80, 54, 2 },
> +	[QCOM_RPM_PM8058_LDO3] =		{ 179, 82, 55, 2 },
> +	[QCOM_RPM_PM8058_LDO4] =		{ 181, 84, 56, 2 },
> +	[QCOM_RPM_PM8058_LDO5] =		{ 183, 86, 57, 2 },
> +	[QCOM_RPM_PM8058_LDO6] =		{ 185, 88, 58, 2 },
> +	[QCOM_RPM_PM8058_LDO7] =		{ 187, 90, 59, 2 },
> +	[QCOM_RPM_PM8058_LDO8] =		{ 189, 92, 60, 2 },
> +	[QCOM_RPM_PM8058_LDO9] =		{ 191, 94, 61, 2 },
> +	[QCOM_RPM_PM8058_LDO10] =		{ 193, 96, 62, 2 },
> +	[QCOM_RPM_PM8058_LDO11] =		{ 195, 98, 63, 2 },
> +	[QCOM_RPM_PM8058_LDO12] =		{ 197, 100, 64, 2 },
> +	[QCOM_RPM_PM8058_LDO13] =		{ 199, 102, 65, 2 },
> +	[QCOM_RPM_PM8058_LDO14] =		{ 201, 104, 66, 2 },
> +	[QCOM_RPM_PM8058_LDO15] =		{ 203, 106, 67, 2 },
> +	[QCOM_RPM_PM8058_LDO16] =		{ 205, 108, 68, 2 },
> +	[QCOM_RPM_PM8058_LDO17] =		{ 207, 110, 69, 2 },
> +	[QCOM_RPM_PM8058_LDO18] =		{ 209, 112, 70, 2 },
> +	[QCOM_RPM_PM8058_LDO19] =		{ 211, 114, 71, 2 },
> +	[QCOM_RPM_PM8058_LDO20] =		{ 213, 116, 72, 2 },
> +	[QCOM_RPM_PM8058_LDO21] =		{ 215, 118, 73, 2 },
> +	[QCOM_RPM_PM8058_LDO22] =		{ 217, 120, 74, 2 },
> +	[QCOM_RPM_PM8058_LDO23] =		{ 219, 122, 75, 2 },
> +	[QCOM_RPM_PM8058_LDO24] =		{ 221, 124, 76, 2 },
> +	[QCOM_RPM_PM8058_LDO25] =		{ 223, 126, 77, 2 },
> +	[QCOM_RPM_PM8058_LVS0] =		{ 225, 128, 78, 1 },
> +	[QCOM_RPM_PM8058_LVS1] =		{ 226, 129, 79, 1 },
> +	[QCOM_RPM_PM8058_NCP] =			{ 227, 130, 80, 2 },
> +	[QCOM_RPM_CXO_BUFFERS] =		{ 229, 132, 81, 1 },
> +};
> +
> +static const struct qcom_rpm msm8660_template = {
> +	.version = -1,
> +	.resource_table = msm8660_rpm_resource_table,
> +	.n_resources = ARRAY_SIZE(msm8660_rpm_resource_table),
> +};
> +
> +static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
> +	[QCOM_RPM_CXO_CLK] =			{ 25, 9, 5, 1 },
> +	[QCOM_RPM_PXO_CLK] =			{ 26, 10, 6, 1 },
> +	[QCOM_RPM_APPS_FABRIC_CLK] =		{ 27, 11, 8, 1 },
> +	[QCOM_RPM_SYS_FABRIC_CLK] =		{ 28, 12, 9, 1 },
> +	[QCOM_RPM_MM_FABRIC_CLK] =		{ 29, 13, 10, 1 },
> +	[QCOM_RPM_DAYTONA_FABRIC_CLK] =		{ 30, 14, 11, 1 },
> +	[QCOM_RPM_SFPB_CLK] =			{ 31, 15, 12, 1 },
> +	[QCOM_RPM_CFPB_CLK] =			{ 32, 16, 13, 1 },
> +	[QCOM_RPM_MMFPB_CLK] =			{ 33, 17, 14, 1 },
> +	[QCOM_RPM_EBI1_CLK] =			{ 34, 18, 16, 1 },
> +	[QCOM_RPM_APPS_FABRIC_HALT] =		{ 35, 19, 18, 1 },
> +	[QCOM_RPM_APPS_FABRIC_MODE] =		{ 37, 20, 19, 1 },
> +	[QCOM_RPM_APPS_FABRIC_IOCTL] =		{ 40, 21, 20, 1 },
> +	[QCOM_RPM_APPS_FABRIC_ARB] =		{ 41, 22, 21, 12 },
> +	[QCOM_RPM_SYS_FABRIC_HALT] =		{ 53, 23, 22, 1 },
> +	[QCOM_RPM_SYS_FABRIC_MODE] =		{ 55, 24, 23, 1 },
> +	[QCOM_RPM_SYS_FABRIC_IOCTL] =		{ 58, 25, 24, 1 },
> +	[QCOM_RPM_SYS_FABRIC_ARB] =		{ 59, 26, 25, 29 },
> +	[QCOM_RPM_MM_FABRIC_HALT] =		{ 88, 27, 26, 1 },
> +	[QCOM_RPM_MM_FABRIC_MODE] =		{ 90, 28, 27, 1 },
> +	[QCOM_RPM_MM_FABRIC_IOCTL] =		{ 93, 29, 28, 1 },
> +	[QCOM_RPM_MM_FABRIC_ARB] =		{ 94, 30, 29, 23 },
> +	[QCOM_RPM_PM8921_S1] =			{ 117, 31, 30, 2 },
> +	[QCOM_RPM_PM8921_S2] =			{ 119, 33, 31, 2 },
> +	[QCOM_RPM_PM8921_S3] =			{ 121, 35, 32, 2 },
> +	[QCOM_RPM_PM8921_S4] =			{ 123, 37, 33, 2 },
> +	[QCOM_RPM_PM8921_S5] =			{ 125, 39, 34, 2 },
> +	[QCOM_RPM_PM8921_S6] =			{ 127, 41, 35, 2 },
> +	[QCOM_RPM_PM8921_S7] =			{ 129, 43, 36, 2 },
> +	[QCOM_RPM_PM8921_S8] =			{ 131, 45, 37, 2 },
> +	[QCOM_RPM_PM8921_L1] =			{ 133, 47, 38, 2 },
> +	[QCOM_RPM_PM8921_L2] =			{ 135, 49, 39, 2 },
> +	[QCOM_RPM_PM8921_L3] =			{ 137, 51, 40, 2 },
> +	[QCOM_RPM_PM8921_L4] =			{ 139, 53, 41, 2 },
> +	[QCOM_RPM_PM8921_L5] =			{ 141, 55, 42, 2 },
> +	[QCOM_RPM_PM8921_L6] =			{ 143, 57, 43, 2 },
> +	[QCOM_RPM_PM8921_L7] =			{ 145, 59, 44, 2 },
> +	[QCOM_RPM_PM8921_L8] =			{ 147, 61, 45, 2 },
> +	[QCOM_RPM_PM8921_L9] =			{ 149, 63, 46, 2 },
> +	[QCOM_RPM_PM8921_L10] =			{ 151, 65, 47, 2 },
> +	[QCOM_RPM_PM8921_L11] =			{ 153, 67, 48, 2 },
> +	[QCOM_RPM_PM8921_L12] =			{ 155, 69, 49, 2 },
> +	[QCOM_RPM_PM8921_L13] =			{ 157, 71, 50, 2 },
> +	[QCOM_RPM_PM8921_L14] =			{ 159, 73, 51, 2 },
> +	[QCOM_RPM_PM8921_L15] =			{ 161, 75, 52, 2 },
> +	[QCOM_RPM_PM8921_L16] =			{ 163, 77, 53, 2 },
> +	[QCOM_RPM_PM8921_L17] =			{ 165, 79, 54, 2 },
> +	[QCOM_RPM_PM8921_L18] =			{ 167, 81, 55, 2 },
> +	[QCOM_RPM_PM8921_L19] =			{ 169, 83, 56, 2 },
> +	[QCOM_RPM_PM8921_L20] =			{ 171, 85, 57, 2 },
> +	[QCOM_RPM_PM8921_L21] =			{ 173, 87, 58, 2 },
> +	[QCOM_RPM_PM8921_L22] =			{ 175, 89, 59, 2 },
> +	[QCOM_RPM_PM8921_L23] =			{ 177, 91, 60, 2 },
> +	[QCOM_RPM_PM8921_L24] =			{ 179, 93, 61, 2 },
> +	[QCOM_RPM_PM8921_L25] =			{ 181, 95, 62, 2 },
> +	[QCOM_RPM_PM8921_L26] =			{ 183, 97, 63, 2 },
> +	[QCOM_RPM_PM8921_L27] =			{ 185, 99, 64, 2 },
> +	[QCOM_RPM_PM8921_L28] =			{ 187, 101, 65, 2 },
> +	[QCOM_RPM_PM8921_L29] =			{ 189, 103, 66, 2 },
> +	[QCOM_RPM_PM8921_CLK1] =		{ 191, 105, 67, 2 },
> +	[QCOM_RPM_PM8921_CLK2] =		{ 193, 107, 68, 2 },
> +	[QCOM_RPM_PM8921_LVS1] =		{ 195, 109, 69, 1 },
> +	[QCOM_RPM_PM8921_LVS2] =		{ 196, 110, 70, 1 },
> +	[QCOM_RPM_PM8921_LVS3] =		{ 197, 111, 71, 1 },
> +	[QCOM_RPM_PM8921_LVS4] =		{ 198, 112, 72, 1 },
> +	[QCOM_RPM_PM8921_LVS5] =		{ 199, 113, 73, 1 },
> +	[QCOM_RPM_PM8921_LVS6] =		{ 200, 114, 74, 1 },
> +	[QCOM_RPM_PM8921_LVS7] =		{ 201, 115, 75, 1 },
> +	[QCOM_RPM_PM8921_NCP] =			{ 202, 116, 80, 2 },
> +	[QCOM_RPM_CXO_BUFFERS] =		{ 204, 118, 81, 1 },
> +	[QCOM_RPM_USB_OTG_SWITCH] =		{ 205, 119, 82, 1 },
> +	[QCOM_RPM_HDMI_SWITCH] =		{ 206, 120, 83, 1 },
> +	[QCOM_RPM_DDR_DMM] =			{ 207, 121, 84, 2 },
> +};
> +
> +static const struct qcom_rpm msm8960_template = {
> +	.version = 3,
> +	.resource_table = msm8960_rpm_resource_table,
> +	.n_resources = ARRAY_SIZE(msm8960_rpm_resource_table),
> +};
> +
> +static const struct of_device_id qcom_rpm_of_match[] = {
> +	{ .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
> +	{ .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
> +	{ .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
> +
> +struct qcom_rpm *dev_get_qcom_rpm(struct device *dev)
> +{
> +	return dev_get_drvdata(dev);
> +}
> +EXPORT_SYMBOL(dev_get_qcom_rpm);
> +
> +int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count)
> +{
> +	const struct qcom_rpm_resource *res;
> +	u32 sel_mask[RPM_SELECT_SIZE] = { 0 };
> +	int left;
> +	int ret = 0;
> +	int i;
> +
> +	if (WARN_ON(resource < 0 || resource >= rpm->n_resources))
> +		return -EINVAL;
> +
> +	res = &rpm->resource_table[resource];
> +	if (WARN_ON(res->size != count))
> +		return -EINVAL;
> +
> +	mutex_lock(&rpm->lock);
> +
> +	for (i = 0; i < res->size; i++)
> +		writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
> +
> +	bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
> +	for (i = 0; i < ARRAY_SIZE(sel_mask); i++) {
> +		writel_relaxed(sel_mask[i],
> +			       RPM_CTRL_REG(rpm, RPM_REQ_SELECT + i));
> +	}
> +
> +	writel_relaxed(RPM_ACTIVE_STATE,
> +		       RPM_CTRL_REG(rpm, RPM_REQUEST_CONTEXT));
> +
> +	reinit_completion(&rpm->ack);
> +	writel(RPM_SIGNAL, rpm->ipc_rpm_reg);
> +
> +	left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT);
> +	if (!left)
> +		ret = -ETIMEDOUT;
> +	else if (rpm->ack_status & RPM_REJECTED)
> +		ret = -EIO;
> +
> +	mutex_unlock(&rpm->lock);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(qcom_rpm_write);
> +
> +static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
> +{
> +	struct qcom_rpm *rpm = dev;
> +	u32 ack;
> +	int i;
> +
> +	ack = readl_relaxed(RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
/n
> +	for (i = 0; i < RPM_SELECT_SIZE; i++)
> +		writel_relaxed(0, RPM_CTRL_REG(rpm, RPM_ACK_SELECTOR + i));

/n
> +	writel(0, RPM_CTRL_REG(rpm, RPM_ACK_CONTEXT));
> +
> +	if (ack & RPM_NOTIFICATION) {
> +		dev_warn(rpm->dev, "ignoring notification!\n");
> +	} else {
> +		rpm->ack_status = ack;
> +		complete(&rpm->ack);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t qcom_rpm_err_interrupt(int irq, void *dev)
> +{
> +	struct qcom_rpm *rpm = dev;
> +
> +	writel(0x1, rpm->ipc_rpm_reg);
> +
> +	dev_err(rpm->dev, "RPM triggered fatal error\n");
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)
> +{
> +	return IRQ_HANDLED;
> +}
> +
> +static int qcom_rpm_probe(struct platform_device *pdev)
> +{
> +	const struct of_device_id *match;
> +	const struct qcom_rpm *template;
> +	struct resource *res;
> +	struct qcom_rpm *rpm;
> +	u32 fw_version[3];
> +	int irq_wakeup;
> +	int irq_ack;
> +	int irq_err;
> +	int ret;
> +
> +	rpm = devm_kzalloc(&pdev->dev, sizeof(*rpm), GFP_KERNEL);

Sorry If I missed somthing obvious, But why not just use the structure 
from of_data. Is the global structure going to be used for something else?

Or make a seperate structure for of_data and not use struct qcom_rpm?


> +	if (!rpm) {
> +		dev_err(&pdev->dev, "Can't allocate qcom_rpm\n");
message not necessary as kernel will print the alocation failures.
> +		return -ENOMEM;
> +	}
> +	rpm->dev = &pdev->dev;
> +	mutex_init(&rpm->lock);
> +	init_completion(&rpm->ack);
> +
> +	irq_ack = platform_get_irq_byname(pdev, "ack");
> +	if (irq_ack < 0) {
> +		dev_err(&pdev->dev, "required ack interrupt missing\n");
> +		return irq_ack;
> +	}
> +
> +	irq_err = platform_get_irq_byname(pdev, "err");
> +	if (irq_err < 0) {
> +		dev_err(&pdev->dev, "required err interrupt missing\n");
> +		return irq_err;
> +	}
> +
> +	irq_wakeup = platform_get_irq_byname(pdev, "wakeup");
> +	if (irq_wakeup < 0) {
> +		dev_err(&pdev->dev, "required wakeup interrupt missing\n");
> +		return irq_wakeup;
> +	}
> +
> +	match = of_match_device(qcom_rpm_of_match, &pdev->dev);
> +	template = match->data;
> +
> +	rpm->version = template->version;
> +	rpm->resource_table = template->resource_table;
> +	rpm->n_resources = template->n_resources;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
Should't you use the platform_get_resource_byname here?

missed error case checks too.
> +	rpm->status_regs = devm_ioremap_resource(&pdev->dev, res);
> +	rpm->ctrl_regs = rpm->status_regs + 0x400;
> +	rpm->req_regs = rpm->status_regs + 0x600;
> +	if (IS_ERR(rpm->status_regs))
> +		return PTR_ERR(rpm->status_regs);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
Dito.
> +	rpm->ipc_rpm_reg = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(rpm->ipc_rpm_reg))
> +		return PTR_ERR(rpm->ipc_rpm_reg);
> +
> +	dev_set_drvdata(&pdev->dev, rpm);
> +
> +	fw_version[0] = readl(RPM_STATUS_REG(rpm, 0));
> +	fw_version[1] = readl(RPM_STATUS_REG(rpm, 1));
> +	fw_version[2] = readl(RPM_STATUS_REG(rpm, 2));
> +	if (fw_version[0] != rpm->version) {
> +		dev_err(&pdev->dev,
> +			"RPM version %u.%u.%u incompatible with driver version %u",
> +			fw_version[0],
> +			fw_version[1],
> +			fw_version[2],
> +			rpm->version);
> +		return -EFAULT;
> +	}
> +
> +	dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
> +							fw_version[1],
> +							fw_version[2]);
> +
> +	writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
> +	writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
> +	writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
> +
> +	ret = devm_request_irq(&pdev->dev,
> +			       irq_ack,
> +			       qcom_rpm_ack_interrupt,
> +			       IRQF_TRIGGER_RISING | IRQF_NO_SUSPEND,
> +			       "qcom_rpm_ack",
> +			       rpm);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to request ack interrupt\n");
> +		return ret;
> +	}
> +

[ ..
> +	ret = irq_set_irq_wake(irq_ack, 1);
> +	if (ret)
> +		dev_warn(&pdev->dev, "failed to mark ack irq as wakeup\n");
> +
..]

Shouln't these be set as part of the pm suspend call, if the device is 
wakeup capable?

> +	ret = devm_request_irq(&pdev->dev,
> +			       irq_err,
> +			       qcom_rpm_err_interrupt,
> +			       IRQF_TRIGGER_RISING,
> +			       "qcom_rpm_err",
> +			       rpm);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to request err interrupt\n");
> +		return ret;
> +	}
> +
> +	ret = devm_request_irq(&pdev->dev,
> +			       irq_wakeup,
> +			       qcom_rpm_wakeup_interrupt,
> +			       IRQF_TRIGGER_RISING,
> +			       "qcom_rpm_wakeup",
> +			       rpm);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to request wakeup interrupt\n");
> +		return ret;
> +	}
> +
> +	ret = irq_set_irq_wake(irq_wakeup, 1);
> +	if (ret)
> +		dev_warn(&pdev->dev, "failed to mark wakeup irq as wakeup\n");
> +
> +	return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
> +}
> +
> +static int qcom_rpm_remove_child(struct device *dev, void *unused)
> +{
> +	platform_device_unregister(to_platform_device(dev));
> +	return 0;
> +}
> +
> +static int qcom_rpm_remove(struct platform_device *pdev)
> +{
> +	device_for_each_child(&pdev->dev, NULL, qcom_rpm_remove_child);
> +	return 0;
> +}
> +
> +static struct platform_driver qcom_rpm_driver = {
> +	.probe = qcom_rpm_probe,
> +	.remove = qcom_rpm_remove,
> +	.driver  = {
> +		.name  = "qcom_rpm",
> +		.owner = THIS_MODULE,
> +		.of_match_table = qcom_rpm_of_match,
> +	},
> +};
> +
> +static int __init qcom_rpm_init(void)
> +{
> +	return platform_driver_register(&qcom_rpm_driver);
> +}
> +arch_initcall(qcom_rpm_init);
> +
> +static void __exit qcom_rpm_exit(void)
> +{
> +	platform_driver_unregister(&qcom_rpm_driver);
> +}
> +module_exit(qcom_rpm_exit)
> +
> +MODULE_DESCRIPTION("Qualcomm Resource Power Manager driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/qcom_rpm.h b/include/linux/mfd/qcom_rpm.h
> new file mode 100644
> index 0000000..a52bc37
> --- /dev/null
> +++ b/include/linux/mfd/qcom_rpm.h
> @@ -0,0 +1,12 @@
> +#ifndef __QCOM_RPM_H__
> +#define __QCOM_RPM_H__
> +
> +#include <linux/types.h>
> +
> +struct device;
> +struct qcom_rpm;
> +
> +struct qcom_rpm *dev_get_qcom_rpm(struct device *dev);
> +int qcom_rpm_write(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count);

IMHO, dummy functions for these are required, otherwise you would get a 
compilation errors on client drivers.

> +
> +#endif
thanks,
srini
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html