Right now the RISC-V timer is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR
for clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT
MMIO counter register for clocksource and CLINT MMIO compare
register for clockevent device.
This patch removes MMIO related stuff from RISC-V timer driver
so that we can have a separate CLINT timer driver.
Signed-off-by: Anup Patel <anup.patel@xxxxxxx>
---
arch/riscv/Kconfig | 2 +-
arch/riscv/include/asm/timex.h | 28 +++++++---------------------
drivers/clocksource/Kconfig | 2 +-
drivers/clocksource/timer-riscv.c | 17 ++---------------
4 files changed, 11 insertions(+), 38 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 448a9952aa2f..868bbc4d0803 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -72,7 +72,7 @@ config RISCV
select PCI_DOMAINS_GENERIC if PCI
select PCI_MSI if PCI
select RISCV_INTC
- select RISCV_TIMER
+ select RISCV_TIMER if RISCV_SBI
select SPARSEMEM_STATIC if 32BIT
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index bad2a7c2cda5..a3fb85d505d4 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -7,41 +7,27 @@
#define _ASM_RISCV_TIMEX_H
#include <asm/csr.h>
-#include <asm/mmio.h>
typedef unsigned long cycles_t;
-extern u64 __iomem *riscv_time_val;
-extern u64 __iomem *riscv_time_cmp;
-
-#ifdef CONFIG_64BIT
-#define mmio_get_cycles() readq_relaxed(riscv_time_val)
-#else
-#define mmio_get_cycles() readl_relaxed(riscv_time_val)
-#define mmio_get_cycles_hi() readl_relaxed(((u32 *)riscv_time_val) + 1)
-#endif
-
static inline cycles_t get_cycles(void)
{
- if (IS_ENABLED(CONFIG_RISCV_SBI))
- return csr_read(CSR_TIME);
- return mmio_get_cycles();
+ return csr_read(CSR_TIME);
}
#define get_cycles get_cycles
+static inline u32 get_cycles_hi(void)
+{
+ return csr_read(CSR_TIMEH);
+}
+#define get_cycles_hi get_cycles_hi
+
#ifdef CONFIG_64BIT
static inline u64 get_cycles64(void)
{
return get_cycles();
}
#else /* CONFIG_64BIT */
-static inline u32 get_cycles_hi(void)
-{
- if (IS_ENABLED(CONFIG_RISCV_SBI))
- return csr_read(CSR_TIMEH);
- return mmio_get_cycles_hi();
-}
-
static inline u64 get_cycles64(void)
{
u32 hi, lo;
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 91418381fcd4..8c6a0f1274af 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -649,7 +649,7 @@ config ATCPIT100_TIMER
config RISCV_TIMER
bool "Timer for the RISC-V platform"
- depends on GENERIC_SCHED_CLOCK && RISCV
+ depends on GENERIC_SCHED_CLOCK && RISCV_SBI
default y
select TIMER_PROBE
select TIMER_OF
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index 9de1dabfb126..c51c5ed15aa7 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -19,26 +19,13 @@
#include <linux/of_irq.h>
#include <asm/smp.h>
#include <asm/sbi.h>
-
-u64 __iomem *riscv_time_cmp;
-u64 __iomem *riscv_time_val;
-
-static inline void mmio_set_timer(u64 val)
-{
- void __iomem *r;
-
- r = riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id());
- writeq_relaxed(val, r);
-}
+#include <asm/timex.h>
static int riscv_clock_next_event(unsigned long delta,
struct clock_event_device *ce)
{
csr_set(CSR_IE, IE_TIE);
- if (IS_ENABLED(CONFIG_RISCV_SBI))
- sbi_set_timer(get_cycles64() + delta);
- else
- mmio_set_timer(get_cycles64() + delta);
+ sbi_set_timer(get_cycles64() + delta);
return 0;
}
--
2.25.1
