Delete the driver from the staging as it is in drivers/clk. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> --- drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/clocking-wizard/Kconfig | 10 - drivers/staging/clocking-wizard/Makefile | 2 - drivers/staging/clocking-wizard/TODO | 12 - .../clocking-wizard/clk-xlnx-clock-wizard.c | 333 --------------------- drivers/staging/clocking-wizard/dt-binding.txt | 30 -- 7 files changed, 390 deletions(-) delete mode 100644 drivers/staging/clocking-wizard/Kconfig delete mode 100644 drivers/staging/clocking-wizard/Makefile delete mode 100644 drivers/staging/clocking-wizard/TODO delete mode 100644 drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c delete mode 100644 drivers/staging/clocking-wizard/dt-binding.txt diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 4ec5528..cdb5422 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -78,8 +78,6 @@ source "drivers/staging/gs_fpgaboot/Kconfig" source "drivers/staging/unisys/Kconfig" -source "drivers/staging/clocking-wizard/Kconfig" - source "drivers/staging/fbtft/Kconfig" source "drivers/staging/fsl-dpaa2/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 4d34198..14570e5 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_FIREWIRE_SERIAL) += fwserial/ obj-$(CONFIG_GOLDFISH) += goldfish/ obj-$(CONFIG_GS_FPGABOOT) += gs_fpgaboot/ obj-$(CONFIG_UNISYSSPAR) += unisys/ -obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/ obj-$(CONFIG_FB_TFT) += fbtft/ obj-$(CONFIG_FSL_DPAA2) += fsl-dpaa2/ obj-$(CONFIG_WILC1000) += wilc1000/ diff --git a/drivers/staging/clocking-wizard/Kconfig b/drivers/staging/clocking-wizard/Kconfig deleted file mode 100644 index 04be22d..0000000 --- a/drivers/staging/clocking-wizard/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Xilinx Clocking Wizard Driver -# - -config COMMON_CLK_XLNX_CLKWZRD - tristate "Xilinx Clocking Wizard" - depends on COMMON_CLK && OF - help - Support for the Xilinx Clocking Wizard IP core clock generator. diff --git a/drivers/staging/clocking-wizard/Makefile b/drivers/staging/clocking-wizard/Makefile deleted file mode 100644 index b1f9152..0000000 --- a/drivers/staging/clocking-wizard/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clk-xlnx-clock-wizard.o diff --git a/drivers/staging/clocking-wizard/TODO b/drivers/staging/clocking-wizard/TODO deleted file mode 100644 index ebe99db..0000000 --- a/drivers/staging/clocking-wizard/TODO +++ /dev/null @@ -1,12 +0,0 @@ -TODO: - - support for fractional multiplier - - support for fractional divider (output 0 only) - - support for set_rate() operations (may benefit from Stephen Boyd's - refactoring of the clk primitives: https://lkml.org/lkml/2014/9/5/766) - - review arithmetic - - overflow after multiplication? - - maximize accuracy before divisions - -Patches to: - Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> - Sören Brinkmann <soren.brinkmann@xxxxxxxxxx> diff --git a/drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c b/drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c deleted file mode 100644 index e52a64b..0000000 --- a/drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c +++ /dev/null @@ -1,333 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Xilinx 'Clocking Wizard' driver - * - * Copyright (C) 2013 - 2014 Xilinx - * - * Sören Brinkmann <soren.brinkmann@xxxxxxxxxx> - */ - -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/module.h> -#include <linux/err.h> - -#define WZRD_NUM_OUTPUTS 7 -#define WZRD_ACLK_MAX_FREQ 250000000UL - -#define WZRD_CLK_CFG_REG(n) (0x200 + 4 * (n)) - -#define WZRD_CLKOUT0_FRAC_EN BIT(18) -#define WZRD_CLKFBOUT_FRAC_EN BIT(26) - -#define WZRD_CLKFBOUT_MULT_SHIFT 8 -#define WZRD_CLKFBOUT_MULT_MASK (0xff << WZRD_CLKFBOUT_MULT_SHIFT) -#define WZRD_DIVCLK_DIVIDE_SHIFT 0 -#define WZRD_DIVCLK_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT) -#define WZRD_CLKOUT_DIVIDE_SHIFT 0 -#define WZRD_CLKOUT_DIVIDE_MASK (0xff << WZRD_DIVCLK_DIVIDE_SHIFT) - -enum clk_wzrd_int_clks { - wzrd_clk_mul, - wzrd_clk_mul_div, - wzrd_clk_int_max -}; - -/** - * struct clk_wzrd: - * @clk_data: Clock data - * @nb: Notifier block - * @base: Memory base - * @clk_in1: Handle to input clock 'clk_in1' - * @axi_clk: Handle to input clock 's_axi_aclk' - * @clks_internal: Internal clocks - * @clkout: Output clocks - * @speed_grade: Speed grade of the device - * @suspended: Flag indicating power state of the device - */ -struct clk_wzrd { - struct clk_onecell_data clk_data; - struct notifier_block nb; - void __iomem *base; - struct clk *clk_in1; - struct clk *axi_clk; - struct clk *clks_internal[wzrd_clk_int_max]; - struct clk *clkout[WZRD_NUM_OUTPUTS]; - unsigned int speed_grade; - bool suspended; -}; - -#define to_clk_wzrd(_nb) container_of(_nb, struct clk_wzrd, nb) - -/* maximum frequencies for input/output clocks per speed grade */ -static const unsigned long clk_wzrd_max_freq[] = { - 800000000UL, - 933000000UL, - 1066000000UL -}; - -static int clk_wzrd_clk_notifier(struct notifier_block *nb, unsigned long event, - void *data) -{ - unsigned long max; - struct clk_notifier_data *ndata = data; - struct clk_wzrd *clk_wzrd = to_clk_wzrd(nb); - - if (clk_wzrd->suspended) - return NOTIFY_OK; - - if (ndata->clk == clk_wzrd->clk_in1) - max = clk_wzrd_max_freq[clk_wzrd->speed_grade - 1]; - else if (ndata->clk == clk_wzrd->axi_clk) - max = WZRD_ACLK_MAX_FREQ; - else - return NOTIFY_DONE; /* should never happen */ - - switch (event) { - case PRE_RATE_CHANGE: - if (ndata->new_rate > max) - return NOTIFY_BAD; - return NOTIFY_OK; - case POST_RATE_CHANGE: - case ABORT_RATE_CHANGE: - default: - return NOTIFY_DONE; - } -} - -static int __maybe_unused clk_wzrd_suspend(struct device *dev) -{ - struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev); - - clk_disable_unprepare(clk_wzrd->axi_clk); - clk_wzrd->suspended = true; - - return 0; -} - -static int __maybe_unused clk_wzrd_resume(struct device *dev) -{ - int ret; - struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev); - - ret = clk_prepare_enable(clk_wzrd->axi_clk); - if (ret) { - dev_err(dev, "unable to enable s_axi_aclk\n"); - return ret; - } - - clk_wzrd->suspended = false; - - return 0; -} - -static SIMPLE_DEV_PM_OPS(clk_wzrd_dev_pm_ops, clk_wzrd_suspend, - clk_wzrd_resume); - -static int clk_wzrd_probe(struct platform_device *pdev) -{ - int i, ret; - u32 reg; - unsigned long rate; - const char *clk_name; - struct clk_wzrd *clk_wzrd; - struct device_node *np = pdev->dev.of_node; - - clk_wzrd = devm_kzalloc(&pdev->dev, sizeof(*clk_wzrd), GFP_KERNEL); - if (!clk_wzrd) - return -ENOMEM; - platform_set_drvdata(pdev, clk_wzrd); - - clk_wzrd->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(clk_wzrd->base)) - return PTR_ERR(clk_wzrd->base); - - ret = of_property_read_u32(np, "speed-grade", &clk_wzrd->speed_grade); - if (!ret) { - if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) { - dev_warn(&pdev->dev, "invalid speed grade '%d'\n", - clk_wzrd->speed_grade); - clk_wzrd->speed_grade = 0; - } - } - - clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1"); - if (IS_ERR(clk_wzrd->clk_in1)) { - if (clk_wzrd->clk_in1 != ERR_PTR(-EPROBE_DEFER)) - dev_err(&pdev->dev, "clk_in1 not found\n"); - return PTR_ERR(clk_wzrd->clk_in1); - } - - clk_wzrd->axi_clk = devm_clk_get(&pdev->dev, "s_axi_aclk"); - if (IS_ERR(clk_wzrd->axi_clk)) { - if (clk_wzrd->axi_clk != ERR_PTR(-EPROBE_DEFER)) - dev_err(&pdev->dev, "s_axi_aclk not found\n"); - return PTR_ERR(clk_wzrd->axi_clk); - } - ret = clk_prepare_enable(clk_wzrd->axi_clk); - if (ret) { - dev_err(&pdev->dev, "enabling s_axi_aclk failed\n"); - return ret; - } - rate = clk_get_rate(clk_wzrd->axi_clk); - if (rate > WZRD_ACLK_MAX_FREQ) { - dev_err(&pdev->dev, "s_axi_aclk frequency (%lu) too high\n", - rate); - ret = -EINVAL; - goto err_disable_clk; - } - - /* we don't support fractional div/mul yet */ - reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) & - WZRD_CLKFBOUT_FRAC_EN; - reg |= readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2)) & - WZRD_CLKOUT0_FRAC_EN; - if (reg) - dev_warn(&pdev->dev, "fractional div/mul not supported\n"); - - /* register multiplier */ - reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) & - WZRD_CLKFBOUT_MULT_MASK) >> WZRD_CLKFBOUT_MULT_SHIFT; - clk_name = kasprintf(GFP_KERNEL, "%s_mul", dev_name(&pdev->dev)); - if (!clk_name) { - ret = -ENOMEM; - goto err_disable_clk; - } - clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor - (&pdev->dev, clk_name, - __clk_get_name(clk_wzrd->clk_in1), - 0, reg, 1); - kfree(clk_name); - if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul])) { - dev_err(&pdev->dev, "unable to register fixed-factor clock\n"); - ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul]); - goto err_disable_clk; - } - - /* register div */ - reg = (readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0)) & - WZRD_DIVCLK_DIVIDE_MASK) >> WZRD_DIVCLK_DIVIDE_SHIFT; - clk_name = kasprintf(GFP_KERNEL, "%s_mul_div", dev_name(&pdev->dev)); - if (!clk_name) { - ret = -ENOMEM; - goto err_rm_int_clk; - } - - clk_wzrd->clks_internal[wzrd_clk_mul_div] = clk_register_fixed_factor - (&pdev->dev, clk_name, - __clk_get_name(clk_wzrd->clks_internal[wzrd_clk_mul]), - 0, 1, reg); - if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div])) { - dev_err(&pdev->dev, "unable to register divider clock\n"); - ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div]); - goto err_rm_int_clk; - } - - /* register div per output */ - for (i = WZRD_NUM_OUTPUTS - 1; i >= 0 ; i--) { - const char *clkout_name; - - if (of_property_read_string_index(np, "clock-output-names", i, - &clkout_name)) { - dev_err(&pdev->dev, - "clock output name not specified\n"); - ret = -EINVAL; - goto err_rm_int_clks; - } - reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(2) + i * 12); - reg &= WZRD_CLKOUT_DIVIDE_MASK; - reg >>= WZRD_CLKOUT_DIVIDE_SHIFT; - clk_wzrd->clkout[i] = clk_register_fixed_factor - (&pdev->dev, clkout_name, clk_name, 0, 1, reg); - if (IS_ERR(clk_wzrd->clkout[i])) { - int j; - - for (j = i + 1; j < WZRD_NUM_OUTPUTS; j++) - clk_unregister(clk_wzrd->clkout[j]); - dev_err(&pdev->dev, - "unable to register divider clock\n"); - ret = PTR_ERR(clk_wzrd->clkout[i]); - goto err_rm_int_clks; - } - } - - kfree(clk_name); - - clk_wzrd->clk_data.clks = clk_wzrd->clkout; - clk_wzrd->clk_data.clk_num = ARRAY_SIZE(clk_wzrd->clkout); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_wzrd->clk_data); - - if (clk_wzrd->speed_grade) { - clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier; - - ret = clk_notifier_register(clk_wzrd->clk_in1, - &clk_wzrd->nb); - if (ret) - dev_warn(&pdev->dev, - "unable to register clock notifier\n"); - - ret = clk_notifier_register(clk_wzrd->axi_clk, &clk_wzrd->nb); - if (ret) - dev_warn(&pdev->dev, - "unable to register clock notifier\n"); - } - - return 0; - -err_rm_int_clks: - clk_unregister(clk_wzrd->clks_internal[1]); -err_rm_int_clk: - kfree(clk_name); - clk_unregister(clk_wzrd->clks_internal[0]); -err_disable_clk: - clk_disable_unprepare(clk_wzrd->axi_clk); - - return ret; -} - -static int clk_wzrd_remove(struct platform_device *pdev) -{ - int i; - struct clk_wzrd *clk_wzrd = platform_get_drvdata(pdev); - - of_clk_del_provider(pdev->dev.of_node); - - for (i = 0; i < WZRD_NUM_OUTPUTS; i++) - clk_unregister(clk_wzrd->clkout[i]); - for (i = 0; i < wzrd_clk_int_max; i++) - clk_unregister(clk_wzrd->clks_internal[i]); - - if (clk_wzrd->speed_grade) { - clk_notifier_unregister(clk_wzrd->axi_clk, &clk_wzrd->nb); - clk_notifier_unregister(clk_wzrd->clk_in1, &clk_wzrd->nb); - } - - clk_disable_unprepare(clk_wzrd->axi_clk); - - return 0; -} - -static const struct of_device_id clk_wzrd_ids[] = { - { .compatible = "xlnx,clocking-wizard" }, - { }, -}; -MODULE_DEVICE_TABLE(of, clk_wzrd_ids); - -static struct platform_driver clk_wzrd_driver = { - .driver = { - .name = "clk-wizard", - .of_match_table = clk_wzrd_ids, - .pm = &clk_wzrd_dev_pm_ops, - }, - .probe = clk_wzrd_probe, - .remove = clk_wzrd_remove, -}; -module_platform_driver(clk_wzrd_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xxxxxxxxxx"); -MODULE_DESCRIPTION("Driver for the Xilinx Clocking Wizard IP core"); diff --git a/drivers/staging/clocking-wizard/dt-binding.txt b/drivers/staging/clocking-wizard/dt-binding.txt deleted file mode 100644 index 723271e..0000000 --- a/drivers/staging/clocking-wizard/dt-binding.txt +++ /dev/null @@ -1,30 +0,0 @@ -Binding for Xilinx Clocking Wizard IP Core - -This binding uses the common clock binding[1]. Details about the devices can be -found in the product guide[2]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Clocking Wizard Product Guide -http://www.xilinx.com/support/documentation/ip_documentation/clk_wiz/v5_1/pg065-clk-wiz.pdf - -Required properties: - - compatible: Must be 'xlnx,clocking-wizard' - - reg: Base and size of the cores register space - - clocks: Handle to input clock - - clock-names: Tuple containing 'clk_in1' and 's_axi_aclk' - - clock-output-names: Names for the output clocks - -Optional properties: - - speed-grade: Speed grade of the device (valid values are 1..3) - -Example: - clock-generator@40040000 { - reg = <0x40040000 0x1000>; - compatible = "xlnx,clocking-wizard"; - speed-grade = <1>; - clock-names = "clk_in1", "s_axi_aclk"; - clocks = <&clkc 15>, <&clkc 15>; - clock-output-names = "clk_out0", "clk_out1", "clk_out2", - "clk_out3", "clk_out4", "clk_out5", - "clk_out6", "clk_out7"; - }; -- 2.1.1
