This patch series adds charger detect support on XUSB hardware used in Tegra210 and Tegra186 SoCs. This patchset is composed with : - dt bindings of XUSB Pad Controller - Tegra XUSB device mode driver to add vbus_draw support - Tegra PHY driver for charger detect support Tests done: - Connect USB cable from ubuntu host to micro-B port of DUT to detect SDP_TYPE charger - Connect USB cable from external powered USB hub(which inturn connects to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger. - Connect USB cable from USB charger to micro-B port of DUT to detect DCP_TYPE charger. DUT: Jetson-tx1, Jetson tx2. V4: - Added ACKed-by details for PHY driver. - Used BIT macro instead of (1 << index) usage as suggested by Chunfeng Yun. V3: - Added ACKed-by details for PHY driver and DT changes. - Functions and its arguments are aligned. - Tabs are used for alignment of MACRO's - For vbus_draw USDC callback, usb_phy set_power error is propogated. - Fixed various comments given by thierry. V2: - Added ACKed-by details for DT patches. - All patches rebased. Nagarjuna Kristam (7): dt-bindings: phy: tegra-xusb: Add charger-detect property phy: tegra: xusb: Add support for UTMI pad power control phy: tegra: xusb: Add USB2 pad power control support for Tegra210 phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection phy: tegra: xusb: Add support for charger detect phy: tegra: xusb: Enable charger detect for Tegra186 phy: tegra: xusb: Enable charger detect for Tegra210 .../bindings/phy/nvidia,tegra124-xusb-padctl.txt | 4 + drivers/phy/tegra/Makefile | 2 +- drivers/phy/tegra/cd.c | 283 +++++++++++++++++++++ drivers/phy/tegra/xusb-tegra186.c | 92 +++++-- drivers/phy/tegra/xusb-tegra210.c | 223 +++++++++++----- drivers/phy/tegra/xusb.c | 80 ++++++ drivers/phy/tegra/xusb.h | 22 ++ 7 files changed, 621 insertions(+), 85 deletions(-) create mode 100644 drivers/phy/tegra/cd.c -- 2.7.4
