Patch adds PCI specific glue driver that creates and registers in-system
cdns-usbssp platform device. Thanks to that we will be able to use
the cdns-usbssp platform driver for USBSS-DEV controller
build on PCI board.
Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
---
drivers/usb/Kconfig | 1 +
drivers/usb/Makefile | 1 +
drivers/usb/cdnsp/Kconfig | 26 +++++
drivers/usb/cdnsp/Makefile | 3 +
drivers/usb/cdnsp/cdnsp-pci.c | 214 ++++++++++++++++++++++++++++++++++
5 files changed, 245 insertions(+)
create mode 100644 drivers/usb/cdnsp/Kconfig
create mode 100644 drivers/usb/cdnsp/Makefile
create mode 100644 drivers/usb/cdnsp/cdnsp-pci.c
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 26475b409b53..555c4a4cb465 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -112,6 +112,7 @@ source "drivers/usb/usbip/Kconfig"
endif
source "drivers/usb/cdns3/Kconfig"
+source "drivers/usb/cdnsp/Kconfig"
source "drivers/usb/mtu3/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 1c1c1d659394..84727f7a4b92 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_DWC2) += dwc2/
obj-$(CONFIG_USB_ISP1760) += isp1760/
obj-$(CONFIG_USB_CDNS3) += cdns3/
+obj-$(CONFIG_USB_CDNSP) += cdnsp/
obj-$(CONFIG_USB_MON) += mon/
obj-$(CONFIG_USB_MTU3) += mtu3/
diff --git a/drivers/usb/cdnsp/Kconfig b/drivers/usb/cdnsp/Kconfig
new file mode 100644
index 000000000000..5796a19bb8a0
--- /dev/null
+++ b/drivers/usb/cdnsp/Kconfig
@@ -0,0 +1,26 @@
+config USB_CDNSP
+ tristate "Cadence CDNSP Dual-Role Controller"
+ depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA
+ select USB_XHCI_PLATFORM if USB_XHCI_HCD
+ select USB_ROLE_SWITCH
+ help
+ Say Y here if your system has a Cadence CDNSP dual-role controller.
+ It supports: dual-role switch Host-only, and Peripheral-only.
+
+ If you choose to build this driver is a dynamically linked
+ module, the module will be called cdnsp.ko.
+
+if USB_CDNSP
+
+config USB_CDNSP_PCI
+ tristate "Cadence CDNSP support on PCIe-based platforms"
+ depends on USB_PCI && ACPI
+ default USB_CDNSP
+ help
+ If you're using the CDNSP Core IP with a PCIe, please say
+ 'Y' or 'M' here.
+
+ If you choose to build this driver as module it will
+ be dynamically linked and module will be called cdnsp-pci.ko
+
+endif
diff --git a/drivers/usb/cdnsp/Makefile b/drivers/usb/cdnsp/Makefile
new file mode 100644
index 000000000000..21adf3eb2f7d
--- /dev/null
+++ b/drivers/usb/cdnsp/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_USB_CDNSP_PCI) += cdnsp-pci.o
diff --git a/drivers/usb/cdnsp/cdnsp-pci.c b/drivers/usb/cdnsp/cdnsp-pci.c
new file mode 100644
index 000000000000..7e05d584d57c
--- /dev/null
+++ b/drivers/usb/cdnsp/cdnsp-pci.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cadence PCI Glue driver.
+ *
+ * Copyright (C) 2019 Cadence.
+ *
+ * Author: Pawel Laszczak <pawell@xxxxxxxxxxx>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+
+struct cdnsp_wrap {
+ struct platform_device *plat_dev;
+ struct resource dev_res[6];
+ int devfn;
+};
+
+#define RES_IRQ_HOST_ID 0
+#define RES_IRQ_PERIPHERAL_ID 1
+#define RES_IRQ_OTG_ID 2
+#define RES_HOST_ID 3
+#define RES_DEV_ID 4
+#define RES_DRD_ID 5
+
+#define PCI_BAR_HOST 0
+#define PCI_BAR_OTG 0
+#define PCI_BAR_DEV 2
+
+#define PCI_DEV_FN_HOST_DEVICE 0
+#define PCI_DEV_FN_OTG 1
+
+#define PCI_DRIVER_NAME "cdns-pci-usbssp"
+#define PLAT_DRIVER_NAME "cdns-usbssp"
+
+#define CDNS_VENDOR_ID 0x17cd
+#define CDNS_DEVICE_ID 0x0100
+#define CDNS_DRD_IF (PCI_CLASS_SERIAL_USB << 8 | 0x80)
+
+static struct pci_dev *cdnsp_get_second_fun(struct pci_dev *pdev)
+{
+ struct pci_dev *func;
+
+ /*
+ * Gets the second function.
+ * It's little tricky, but this platform has two function.
+ * The fist keeps resources for Host/Device while the second
+ * keeps resources for DRD/OTG.
+ */
+ func = pci_get_device(pdev->vendor, pdev->device, NULL);
+ if (unlikely(!func))
+ return NULL;
+
+ if (func->devfn == pdev->devfn) {
+ func = pci_get_device(pdev->vendor, pdev->device, func);
+ if (unlikely(!func))
+ return NULL;
+ }
+
+ return func;
+}
+
+static int cdnsp_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct platform_device_info plat_info;
+ struct cdnsp_wrap *wrap;
+ struct resource *res;
+ struct pci_dev *func;
+ int err;
+
+ /*
+ * For GADGET/HOST PCI (devfn) function number is 0,
+ * for OTG PCI (devfn) function number is 1.
+ */
+ if (!id || (pdev->devfn != PCI_DEV_FN_HOST_DEVICE &&
+ pdev->devfn != PCI_DEV_FN_OTG))
+ return -EINVAL;
+
+ func = cdnsp_get_second_fun(pdev);
+ if (unlikely(!func))
+ return -EINVAL;
+
+ if (func->class == PCI_CLASS_SERIAL_USB_XHCI ||
+ pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
+ return -EINVAL;
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", err);
+ return err;
+ }
+
+ pci_set_master(pdev);
+
+ if (pci_is_enabled(func)) {
+ wrap = pci_get_drvdata(func);
+ } else {
+ wrap = kzalloc(sizeof(*wrap), GFP_KERNEL);
+ if (!wrap) {
+ pci_disable_device(pdev);
+ return -ENOMEM;
+ }
+ }
+
+ res = wrap->dev_res;
+
+ /* For GADGET device function number is 0. */
+ if (pdev->devfn == 0) {
+ /* Function 0: host(BAR_0) + device(BAR_1).*/
+ dev_dbg(&pdev->dev, "Initialize Device resources\n");
+ res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV);
+ res[RES_DEV_ID].end = pci_resource_end(pdev, PCI_BAR_DEV);
+ res[RES_DEV_ID].name = "dev";
+ res[RES_DEV_ID].flags = IORESOURCE_MEM;
+ dev_dbg(&pdev->dev, "USBSS-DEV physical base addr: %pa\n",
+ &res[RES_DEV_ID].start);
+
+ res[RES_HOST_ID].start = pci_resource_start(pdev, PCI_BAR_HOST);
+ res[RES_HOST_ID].end = pci_resource_end(pdev, PCI_BAR_HOST);
+ res[RES_HOST_ID].name = "xhci";
+ res[RES_HOST_ID].flags = IORESOURCE_MEM;
+ dev_dbg(&pdev->dev, "USBSS-XHCI physical base addr: %pa\n",
+ &res[RES_HOST_ID].start);
+
+ /* Interrupt for XHCI, */
+ wrap->dev_res[RES_IRQ_HOST_ID].start = pdev->irq;
+ wrap->dev_res[RES_IRQ_HOST_ID].name = "host";
+ wrap->dev_res[RES_IRQ_HOST_ID].flags = IORESOURCE_IRQ;
+
+ /* Interrupt device. It's the same as for HOST. */
+ wrap->dev_res[RES_IRQ_PERIPHERAL_ID].start = pdev->irq;
+ wrap->dev_res[RES_IRQ_PERIPHERAL_ID].name = "peripheral";
+ wrap->dev_res[RES_IRQ_PERIPHERAL_ID].flags = IORESOURCE_IRQ;
+ } else {
+ res[RES_DRD_ID].start = pci_resource_start(pdev, PCI_BAR_OTG);
+ res[RES_DRD_ID].end = pci_resource_end(pdev, PCI_BAR_OTG);
+ res[RES_DRD_ID].name = "otg";
+ res[RES_DRD_ID].flags = IORESOURCE_MEM;
+ dev_dbg(&pdev->dev, "CDNSP-DRD physical base addr: %pa\n",
+ &res[RES_DRD_ID].start);
+
+ /* Interrupt for OTG/DRD. */
+ wrap->dev_res[RES_IRQ_OTG_ID].start = pdev->irq;
+ wrap->dev_res[RES_IRQ_OTG_ID].name = "otg";
+ wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ;
+ }
+
+ if (pci_is_enabled(func)) {
+ /* Set up platform device info. */
+ memset(&plat_info, 0, sizeof(plat_info));
+ plat_info.parent = &pdev->dev;
+ plat_info.fwnode = pdev->dev.fwnode;
+ plat_info.name = PLAT_DRIVER_NAME;
+ plat_info.id = pdev->devfn;
+ wrap->devfn = pdev->devfn;
+ plat_info.res = wrap->dev_res;
+ plat_info.num_res = ARRAY_SIZE(wrap->dev_res);
+ plat_info.dma_mask = pdev->dma_mask;
+ /* Register platform device. */
+ wrap->plat_dev = platform_device_register_full(&plat_info);
+ if (IS_ERR(wrap->plat_dev)) {
+ pci_disable_device(pdev);
+ err = PTR_ERR(wrap->plat_dev);
+ kfree(wrap);
+ return err;
+ }
+ }
+
+ pci_set_drvdata(pdev, wrap);
+ return err;
+}
+
+static void cdnsp_pci_remove(struct pci_dev *pdev)
+{
+ struct cdnsp_wrap *wrap;
+ struct pci_dev *func;
+
+ func = cdnsp_get_second_fun(pdev);
+
+ wrap = (struct cdnsp_wrap *)pci_get_drvdata(pdev);
+ if (wrap->devfn == pdev->devfn)
+ platform_device_unregister(wrap->plat_dev);
+
+ if (!pci_is_enabled(func))
+ kfree(wrap);
+}
+
+static const struct pci_device_id cdnsp_pci_ids[] = {
+ { PCI_VENDOR_ID_CDNS, CDNS_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_USB_DEVICE, PCI_ANY_ID },
+ { PCI_VENDOR_ID_CDNS, CDNS_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
+ CDNS_DRD_IF, PCI_ANY_ID },
+ { 0, }
+};
+
+static struct pci_driver cdnsp_pci_driver = {
+ .name = "cdnsp-pci",
+ .id_table = &cdnsp_pci_ids[0],
+ .probe = cdnsp_pci_probe,
+ .remove = cdnsp_pci_remove,
+};
+
+module_pci_driver(cdnsp_pci_driver);
+MODULE_DEVICE_TABLE(pci, cdnsp_pci_ids);
+
+MODULE_AUTHOR("Pawel Laszczak <pawell@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Cadence CDNSP PCI Glue Layer");
--
2.17.1
