[PATCH 1/3] dt-bindings: pinctrl: Add bindings for Actions S500 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add pinctrl and gpio bindings for Actions Semi S500 SoC.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
---
 .../pinctrl/actions,s500-pinctrl.yaml         | 228 ++++++++++++++++++
 1 file changed, 228 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
new file mode 100644
index 000000000000..856947c70844
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi S500 SoC pinmux & GPIO controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
+
+description: |
+  Pinmux & GPIO controller manages pin multiplexing & configuration including
+  GPIO function selection & GPIO attributes configuration. Please refer to
+  pinctrl-bindings.txt in this directory for common binding part and usage.
+
+properties:
+  compatible:
+    const: actions,s500-pinctrl
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  '#gpio-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  interrupts:
+    description:
+      One interrupt per each of the 5 GPIO ports supported by the controller,
+      sorted by port number ascending order.
+    minItems: 5
+    maxItems: 5
+
+patternProperties:
+  '^.*$':
+    if:
+      type: object
+    then:
+      patternProperties:
+        'pinmux$':
+          type: object
+          description:
+            Pinctrl node's client devices specify pin muxes using subnodes,
+            which in turn use the standard properties below.
+          $ref: pinmux-node.yaml#
+
+          properties:
+            groups:
+              description:
+                List of gpio pin groups affected by the functions specified in
+                this subnode.
+              items:
+                oneOf:
+                  - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
+                      rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp,
+                      rmii_rxd1_mfp, rmii_rxd0_mfp, rmii_ref_clk_mfp,
+                      i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp,
+                      i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp,
+                      ks_in3_mfp, ks_out0_mfp, ks_out1_mfp, ks_out2_mfp,
+                      lvds_o_pn_mfp, dsi_dn0_mfp, dsi_dp2_mfp, lcd0_d17_mfp,
+                      dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp, lvds_ee_pn_mfp,
+                      spi0_i2c_pcm_mfp, spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp,
+                      lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp,
+                      uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp,
+                      sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, sd1_d0_d3_mfp,
+                      sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, uart0_rx_mfp,
+                      clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
+                      uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
+                      pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
+                      dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
+                      nand_ceb3_mfp]
+              minItems: 1
+              maxItems: 32
+
+            function:
+              description:
+                Specify the alternative function to be configured for the
+                given gpio pin groups.
+              enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
+                sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
+                i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+                p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
+                mipi_csi, nand, spdif, ts, lcd0]
+
+          required:
+            - groups
+            - function
+
+          additionalProperties: false
+
+        'pinconf$':
+          type: object
+          description:
+            Pinctrl node's client devices specify pin configurations using
+            subnodes, which in turn use the standard properties below.
+          $ref: pincfg-node.yaml#
+
+          properties:
+            groups:
+              description:
+                List of gpio pin groups affected by the drive-strength property
+                specified in this subnode.
+              items:
+                oneOf:
+                  - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
+                      rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
+                      smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
+                      i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
+                      lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
+                      sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
+                      spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
+                      i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
+                      sens0_ckout_drv, uart3_all_drv]
+              minItems: 1
+              maxItems: 32
+
+            pins:
+              description:
+                List of gpio pins affected by the bias-pull-* and
+                input-schmitt-* properties specified in this subnode.
+              items:
+                oneOf:
+                  - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
+                      eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
+                      eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+                      i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
+                      i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0,
+                      ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn,
+                      lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap,
+                      lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn,
+                      lvds_ecp, lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap,
+                      lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, dsi_dn3, dsi_dp1,
+                      dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2,
+                      dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, sd1_d1,
+                      sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+                      spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+                      uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
+                      sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0,
+                      dnand_ceb1, dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx,
+                      uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb,
+                      uart3_ctsb, pcm1_in, pcm1_clk, pcm1_sync, pcm1_out,
+                      i2c1_sclk, i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0,
+                      csi_dp0, csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3,
+                      csi_dp3, csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2,
+                      dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7,
+                      dnand_rb, dnand_rdb, dnand_rdbn, dnand_wrb, porb,
+                      clko_25m, bsel, pkg0, pkg1, pkg2, pkg3]
+              minItems: 1
+              maxItems: 64
+
+            bias-pull-up: true
+            bias-pull-down: true
+
+            drive-strength:
+              description:
+                Selects the drive strength for the specified pins, in mA.
+              enum: [2, 4, 8, 12]
+
+            input-schmitt-enable: true
+            input-schmitt-disable: true
+
+          additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - gpio-ranges
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl: pinctrl@b01b0000 {
+        compatible = "actions,s500-pinctrl";
+        reg = <0xe01b0000 0x1000>;
+        clocks = <&cmu 20>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 132>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        i2c0_default: i2c0_default {
+            pinmux {
+                groups = "i2c0_mfp";
+                function = "i2c0";
+            };
+
+            pinconf {
+                pins = "i2c0_sclk", "i2c0_sdata";
+                bias-pull-up;
+            };
+        };
+    };
+
+...
-- 
2.27.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux