Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and
fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
---
v3:
- change underscore to hyphen in node names
- use generic node name for gsc_gpio nodes
v2:
- use keycode bindings from linux-event-codes.h
- fix gw5910 vdd_bat adc mode
- fix gw5913 vdd_bat adc mode
---
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 147 +++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++-
14 files changed, 2075 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 419a7cd..7705285 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,6 +150,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -126,13 +271,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -387,6 +525,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 60563ff..9e5bec1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -165,6 +213,109 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -189,13 +340,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -504,6 +648,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8942bec..7ea4fdd 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -158,6 +206,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -182,13 +339,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -486,6 +636,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index c40583d..0c19759 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -29,6 +30,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -195,6 +243,117 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+ };
+
+ fan-controller@2c {
+ compatible = "gw,gsc-fan";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2c>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -219,13 +378,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -571,6 +723,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 8c33510..1516e2b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -47,6 +47,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
/ {
@@ -63,6 +64,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -167,6 +215,97 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -191,13 +330,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -464,6 +596,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b7..3cb568d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
bootargs = "console=ttymxc1,115200";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -92,6 +140,103 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -116,13 +261,6 @@
pagesize = <16>;
};
- gpio: pca9555@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc: ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -297,6 +435,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index ee85031..db30de5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -61,6 +62,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -130,11 +178,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio: pca9555@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8a";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0b";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_an1";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -428,6 +566,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index e8e36df..1871331 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -88,6 +88,53 @@
default-on;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -243,6 +290,115 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+
+ channel@26 {
+ gw,mode = <1>;
+ reg = <0x26>;
+ label = "vdd_gps";
+ };
+
+ channel@29 {
+ gw,mode = <1>;
+ reg = <0x29>;
+ label = "vdd_an2";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -267,13 +423,6 @@
pagesize = <16>;
};
- pca9555: gpio@23 {
- compatible = "nxp,pca9555";
- reg = <0x23>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
ds1672: rtc@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
@@ -589,6 +738,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index aee9221..0461085 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
chosen {
@@ -71,6 +72,53 @@
default-brightness-level = <100>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -183,11 +231,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 6d21cc6..8b2fe2f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -46,6 +46,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -68,6 +69,53 @@
default-brightness-level = <7>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -205,11 +253,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- pca9555: gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom1: eeprom@50 {
@@ -484,6 +622,7 @@
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index 0bdebdd..b1ff7c8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -102,11 +150,101 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_an1";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
@@ -133,7 +271,7 @@
pagesize = <16>;
};
- rtc@68 {
+ ds1672@68 {
compatible = "dallas,ds1672";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 30fe47f..4bcd5b7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -22,6 +23,53 @@
reg = <0x10000000 0x20000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -125,11 +173,121 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_3p0";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_arm";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_soc";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p5";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p8";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_1p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 8c57fd2..bde4690 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -106,11 +154,108 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ gw,mode = <0>;
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ channel@2 {
+ gw,mode = <1>;
+ reg = <0x02>;
+ label = "vdd_vin";
+ };
+
+ channel@5 {
+ gw,mode = <1>;
+ reg = <0x05>;
+ label = "vdd_3p3";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@b {
+ gw,mode = <1>;
+ reg = <0x0b>;
+ label = "vdd_5p0";
+ };
+
+ channel@e {
+ gw,mode = <1>;
+ reg = <0xe>;
+ label = "vdd_arm";
+ };
+
+ channel@11 {
+ gw,mode = <1>;
+ reg = <0x11>;
+ label = "vdd_soc";
+ };
+
+ channel@14 {
+ gw,mode = <1>;
+ reg = <0x14>;
+ label = "vdd_3p0";
+ };
+
+ channel@17 {
+ gw,mode = <1>;
+ reg = <0x17>;
+ label = "vdd_1p5";
+ };
+
+ channel@1d {
+ gw,mode = <1>;
+ reg = <0x1d>;
+ label = "vdd_1p8";
+ };
+
+ channel@20 {
+ gw,mode = <1>;
+ reg = <0x20>;
+ label = "vdd_1p0";
+ };
+
+ channel@23 {
+ gw,mode = <1>;
+ reg = <0x23>;
+ label = "vdd_2p5";
+ };
+ };
+
+ fan-controller@a {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "gw,gsc-fan";
+ reg = <0x0a>;
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 635c203..d62a8da 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
/ {
/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
stdout-path = &uart2;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ user-pb {
+ label = "user_pb";
+ gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ user-pb1x {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-erased {
+ label = "key-erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ eeprom-wp {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ tamper {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ switch-hold {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -87,11 +135,114 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
- gpio@23 {
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #size-cells = <0>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <3>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ gw,voltage-offset-microvolt = <800000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <22100 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_arm";
+ };
+
+ channel@8e {
+ gw,mode = <2>;
+ reg = <0x8e>;
+ label = "vdd_soc";
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_1p5";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_1p0";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_3p0";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_an1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gsc_gpio: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
};
eeprom@50 {
--
2.7.4
