[PATCH v6 1/3] dt-bindings: Add ch7322 media i2c device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ch7322 is a Chrontel CEC controller.

Signed-off-by: Jeff Chase <jnchase@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../bindings/media/i2c/chrontel,ch7322.yaml   | 67 +++++++++++++++++++
 MAINTAINERS                                   |  7 ++
 2 files changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
new file mode 100644
index 000000000000..daa2869377c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Chrontel HDMI-CEC Controller
+
+maintainers:
+  - Jeff Chase <jnchase@xxxxxxxxxx>
+
+description:
+  The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
+  programmable through I2C and drives a single CEC line.
+
+properties:
+  compatible:
+    const: chrontel,ch7322
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the RESET pin, if any. This
+      pin is active-low.
+    maxItems: 1
+
+  standby-gpios:
+    description:
+      Reference to the GPIO connected to the OE pin, if any. When low
+      the device will respond to power status requests with "standby"
+      if in auto mode.
+    maxItems: 1
+
+  # see ../cec.txt
+  hdmi-phandle:
+    description: phandle to the HDMI controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ch7322@75 {
+        compatible = "chrontel,ch7322";
+        reg = <0x75>;
+        interrupts = <47 IRQ_TYPE_EDGE_RISING>;
+        standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+        reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+        hdmi-phandle = <&hdmi>;
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 68f21d46614c..c1c17ca17830 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4101,6 +4101,13 @@ F:	drivers/power/supply/cros_usbpd-charger.c
 N:	cros_ec
 N:	cros-ec
 
+CHRONTEL CH7322 CEC DRIVER
+M:	Jeff Chase <jnchase@xxxxxxxxxx>
+L:	linux-media@xxxxxxxxxxxxxxx
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/chontel,ch7322.yaml
+
 CIRRUS LOGIC AUDIO CODEC DRIVERS
 M:	James Schulman <james.schulman@xxxxxxxxxx>
 M:	David Rhodes <david.rhodes@xxxxxxxxxx>
-- 
2.27.0.111.gc72c7da667-goog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux