From: Ravi Kumar Bokka <rbokka@xxxxxxxxxxxxxx>
This patch adds properties to the qfprom node to enable fuse blowing.
Signed-off-by: Ravi Kumar Bokka <rbokka@xxxxxxxxxxxxxx>
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Changes in v4:
- Clock name is "core", not "sec".
Changes in v3:
- Name is now 'efuse' to match what schema checker wants.
- Reorganized ranges to match driver/bindings changes.
- Added 4th range as per driver/binding changes.
- No more reg-names as per driver/binding changes.
- Clock name is now just "sec" as per driver/binding changes.
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 4 ++++
arch/arm64/boot/dts/qcom/sc7180.dtsi | 10 ++++++++--
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 39dbfc89689e..4b3c6ebdc8d8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -287,6 +287,10 @@ vreg_bob: bob {
};
};
+&qfprom {
+ vcc-supply = <&vreg_l11a_1p8>;
+};
+
&qspi {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3a8076c8bdbf..bfbdace2d29c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -498,9 +498,15 @@ gcc: clock-controller@100000 {
#power-domain-cells = <1>;
};
- qfprom@784000 {
+ qfprom: efuse@784000 {
compatible = "qcom,qfprom";
- reg = <0 0x00784000 0 0x8ff>;
+ reg = <0 0x00784000 0 0x8ff>,
+ <0 0x00780000 0 0x7a0>,
+ <0 0x00782000 0 0x100>,
+ <0 0x00786000 0 0x1fff>;
+
+ clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+ clock-names = "core";
#address-cells = <1>;
#size-cells = <1>;
--
2.27.0.111.gc72c7da667-goog
