Hi Ricardo. On Wed, Jun 17, 2020 at 11:46:29AM +0200, Ricardo Cañuelo wrote: > This series converts the DT binding for the TI TFP410 DPI-to-DVI encoder > to json-schema. > > It also fixes a minor bug in the ti-tfp410 driver that causes a > wrong calculation of the setup and hold times when the de-skew feature > is enabled. The retrieval of the de-skew value from the DT has also been > updated to reflect the binding changes. > > Changes in v4: > > - ti,tfp410.yaml: > - "ports" node set back as required (Laurent Pinchart). This means > that dove-sbc-a510.dts will not comply with the binding and will > have to be fixed at some point. > > The bindings have been tested with: > > make dt_binding_check ARCH=<arch> DT_SCHEMA_FILES=<...ti,tfp410.yaml> > make dtbs_check ARCH=<arch> DT_SCHEMA_FILES=<...ti,tfp410.yaml> > > for <arch> = arm and arm64. > This uncovered a number of dts files that use the TFP410 but not through > I2C and don't define the ti,deskew property. These should also be fixed. > > Ricardo Cañuelo (4): > dt-bindings: display: ti,tfp410.txt: convert to yaml > dt-bindings: display: ti,tfp410.yaml: Redefine ti,deskew property > drm/bridge: tfp410: fix de-skew value retrieval from DT > drm/bridge: tfp410: Fix setup and hold time calculation Thanks for following up and this. Applied to drm-misc-next. Sam > > .../bindings/display/bridge/ti,tfp410.txt | 66 --------- > .../bindings/display/bridge/ti,tfp410.yaml | 131 ++++++++++++++++++ > drivers/gpu/drm/bridge/ti-tfp410.c | 10 +- > 3 files changed, 136 insertions(+), 71 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt > create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml > > -- > 2.18.0 > > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel
