Add a BLSP2 UART2 node to enable serial connection.
Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index df35c975c94c..20e859eb1318 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -243,6 +243,15 @@ blsp1_uart2: serial@f991e000 {
<&gcc GCC_BLSP1_AHB_CLK>;
};
+ blsp2_uart2: serial@f995e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf995e000 0x1000>;
+ interrupt = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ };
+
spmi_bus: qcom,spmi@fc4c0000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xfc4cf000 0x1000>,
--
2.27.0
