[PATCH/RFC 2/5] ravb: Split delay handling in parsing and applying

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, full delay handling is done in both the probe and resume
paths.  Split it in two parts, so the resume path doesn't have to redo
the parsing part over and over again.

Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 drivers/net/ethernet/renesas/ravb.h      |  4 +++-
 drivers/net/ethernet/renesas/ravb_main.c | 21 ++++++++++++++++-----
 2 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index 9f88b5db4f89843a..e5ca12ce93c730a9 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -1036,7 +1036,9 @@ struct ravb_private {
 	unsigned no_avb_link:1;
 	unsigned avb_link_active_low:1;
 	unsigned wol_enabled:1;
-	int num_tx_desc;	/* TX descriptors per packet */
+	unsigned rxcidm:1;		/* RX Clock Internal Delay Mode */
+	unsigned txcidm:1;		/* TX Clock Internal Delay Mode */
+	int num_tx_desc;		/* TX descriptors per packet */
 };
 
 static inline u32 ravb_read(struct net_device *ndev, enum ravb_reg reg)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index a442bcf64b9cd875..f326234d1940f43e 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1967,23 +1967,32 @@ static const struct soc_device_attribute ravb_delay_mode_quirk_match[] = {
 };
 
 /* Set tx and rx clock internal delay modes */
-static void ravb_set_delay_mode(struct net_device *ndev)
+static void ravb_parse_delay_mode(struct net_device *ndev)
 {
 	struct ravb_private *priv = netdev_priv(ndev);
-	int set = 0;
 
 	if (priv->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
 	    priv->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID)
-		set |= APSR_DM_RDM;
+		priv->rxcidm = true;
 
 	if (priv->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
 	    priv->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) {
 		if (!WARN(soc_device_match(ravb_delay_mode_quirk_match),
 			  "phy-mode %s requires TX clock internal delay mode which is not supported by this hardware revision. Please update device tree",
 			  phy_modes(priv->phy_interface)))
-			set |= APSR_DM_TDM;
+			priv->txcidm = true;
 	}
+}
 
+static void ravb_set_delay_mode(struct net_device *ndev)
+{
+	struct ravb_private *priv = netdev_priv(ndev);
+	u32 set = 0;
+
+	if (priv->rxcidm)
+		set |= APSR_DM_RDM;
+	if (priv->txcidm)
+		set |= APSR_DM_TDM;
 	ravb_modify(ndev, APSR, APSR_DM, set);
 }
 
@@ -2116,8 +2125,10 @@ static int ravb_probe(struct platform_device *pdev)
 	/* Request GTI loading */
 	ravb_modify(ndev, GCCR, GCCR_LTI, GCCR_LTI);
 
-	if (priv->chip_id != RCAR_GEN2)
+	if (priv->chip_id != RCAR_GEN2) {
+		ravb_parse_delay_mode(ndev);
 		ravb_set_delay_mode(ndev);
+	}
 
 	/* Allocate descriptor base address table */
 	priv->desc_bat_size = sizeof(struct ravb_desc) * DBAT_ENTRY_NUM;
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux