Hi,
On Wed, Jun 17, 2020 at 12:23:05PM +0200, Krzysztof Kozlowski wrote:
> The driver requires interrupts (fails probe if it is not provided) so
> document this requirement in bindings.
>
> Fixes: 4aeae9cb0dad ("power_supply: Add support for TI BQ25890 charger chip")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
Thanks, queued.
-- Sebastian
> Documentation/devicetree/bindings/power/supply/bq25890.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt
> index 51ecc756521f..3b4c69a7fa70 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt
> +++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt
> @@ -10,6 +10,7 @@ Required properties:
> * "ti,bq25895"
> * "ti,bq25896"
> - reg: integer, i2c address of the device.
> +- interrupts: interrupt line;
> - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
> - ti,charge-current: integer, maximum charging current (in uA);
> - ti,termination-current: integer, charge will be terminated when current in
> @@ -39,6 +40,9 @@ bq25890 {
> compatible = "ti,bq25890";
> reg = <0x6a>;
>
> + interrupt-parent = <&gpio1>;
> + interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
> +
> ti,battery-regulation-voltage = <4200000>;
> ti,charge-current = <1000000>;
> ti,termination-current = <50000>;
> --
> 2.17.1
>
Attachment:
signature.asc
Description: PGP signature
