Am Mittwoch, 28. Mai 2014, 10:15:43 schrieb Linus Walleij: > On Tue, May 27, 2014 at 3:09 PM, Heiko Stübner <heiko@xxxxxxxxx> wrote: > > Am Dienstag, 27. Mai 2014, 09:27:36 schrieb Ivan T. Ivanov: > >> From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx> > >> > >> Add "power-source" property to generic options used for DT parsing files. > >> This enables drivers, which use generic pin configurations, to get the > >> value passed to this property. > > > > I think the main problem here is, that pinconf-generic.h defines the > > power- > > source as having a "custom format". With DT as a hardware description, > > implementaton specific values do not work well - instead it should have a > > regular unit-value. > > > > For the power-source I think volts could work well - as this is the main > > use- case for pinctrl I know. The regulator-binding uses microvolts, > > maybe it would be good use a similar unit. > > (...) > > > pcfg_1v8 { > > > > power-source = <1800000>; > > > > }; > > I don't think this is what it's meant for actually. In this case the thing > would be modeled as a regulator rather than some pin control option I > guess? > > I think it's more like a selector, such as found on old amplifiers, > input source A, B or C? So it's just some discrete number. as I said, you know this better than me ;-) I was thinking more of these io-voltages, where one can select between say 1.8 and 3.3V for the pins. I have this somewhere on my todo list for the rockchips too. So essentially the pinctrl driver [as it is a pin-group specific setting] should just export regulators for these voltage settings, without touching the pinconfig itself, right? Thanks Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html