Re: [PATCH 06/38] dt-bindings: display: tegra: Document display-hub

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 17, 2020 at 04:55:06PM -0600, Rob Herring wrote:
> On Fri, Jun 12, 2020 at 04:18:31PM +0200, Thierry Reding wrote:
> > From: Thierry Reding <treding@xxxxxxxxxx>
> > 
> > Tegra186 and later have an additional component in the display pipeline
> > called the display hub. Document the bindings which were missing.
> 
> I'd rather this be after the conversion or I'm reviewing it twice.

Okay, I'll reorder the patches accordingly.

> > 
> > Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> > ---
> >  .../display/tegra/nvidia,tegra20-host1x.txt   | 50 +++++++++++++++++++
> >  1 file changed, 50 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> > index 47319214b5f6..2cf3cc4893da 100644
> > --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> > +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> > @@ -297,6 +297,56 @@ of the following host1x client modules:
> >    - reset-names: Must include the following entries:
> >      - vic
> >  
> > +- display-hub: display controller hub
> > +  Required properties:
> > +  - compatible: "nvidia,tegra<chip>-display"
> > +  - reg: Physical base address and length of the controller's registers.
> > +  - interrupts: The interrupt outputs from the controller.
> > +  - clocks: Must contain an entry for each entry in clock-names.
> > +    See ../clocks/clock-bindings.txt for details.
> > +  - clock-names: Must include the following entries:
> > +    - disp
> > +    - dsc
> > +    - hub
> > +  - resets: Must contain an entry for each entry in reset-names.
> > +    See ../reset/reset.txt for details.
> > +  - reset-names: Must include the following entries:
> > +    - misc
> > +    - wgrp0
> > +    - wgrp1
> > +    - wgrp2
> > +    - wgrp3
> > +    - wgrp4
> > +    - wgrp5
> > +  - power-domains: A list of phandle and specifiers identifying the power
> > +    domains that the display hub is part of.
> > +  - ranges: Range of registers used for the display controllers.
> > +
> > +  Each subnode of the display hub represents one of the display controllers
> > +  available:
> > +
> > +  - display: display controller
> > +    - compatible: "nvidia,tegra<chip>-dc"
> > +    - reg: Physical base address and length of the controller's registers.
> > +    - interrupts: The interrupt outputs from the controller.
> > +    - clocks: Must contain an entry for each entry in clock-names.
> > +      See ../clocks/clock-bindings.txt for details.
> > +    - clock-names: Must include the following entries:
> > +      - dc
> > +    - resets: Must contain an entry for each entry in reset-names.
> > +      See ../reset/reset.txt for details.
> > +    - reset-names: Must include the following entries:
> > +      - dc
> > +    - power-domains: A list of phandle and specifiers that identify the power
> > +      domains that this display controller is part of.
> > +    - iommus: A phandle and specifier identifying the SMMU master interface of
> > +      this display controller.
> > +    - nvidia,outputs: A list of phandles of outputs that this display
> > +      controller can drive.
> 
> Seems like an OF graph should describe this?

The above documents the current state of affairs. I don't recall exactly
why we never merged the bindings, but we've been using this
nvidia,outputs property for almost three years now. Changing this would
break ABI, although I guess you could say that since this was never
documented it can't be ABI. Still, changing this is going to cause old
device trees to fail with new kernels. Unless of course if we add some
backwards-compatibility mechanism in the driver. But in that case, what
exactly do we gain by switching to an OF graph?

Historically, I think nvidia,outputs was introduced before OF graphs
were "a thing", at least in DRM. According to the git log, the helpers
for graphs were introduced a couple of years before nvidia,outputs was
used, but I guess they must not have been widespread enough for me to
have been aware of them.

Anyway, irrespective of the compatibility issues, I tried to use an OF
graph to describe this and here's what I came up with:

--- >8 ---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 170 ++++++++++++++++++++++++++++++-
 drivers/gpu/drm/tegra/dc.c               |  15 +--
 drivers/gpu/drm/tegra/dc.h               |   1 -
 drivers/gpu/drm/tegra/output.c           |  12 +--
 4 files changed, 172 insertions(+), 26 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 58100fb9cd8b..a3dcf2437976 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -994,8 +994,38 @@ display@15200000 {
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
-				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
 				nvidia,head = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dc0_out: port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+
+						dc0_out_dsia: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&dsia_in_dc0>;
+						};
+
+						dc0_out_dsib: endpoint@1 {
+							reg = <1>;
+							remote-endpoint = <&dsib_in_dc0>;
+						};
+
+						dc0_out_sor0: endpoint@2 {
+							reg = <2>;
+							remote-endpoint = <&sor0_in_dc0>;
+						};
+
+						dc0_out_sor1: endpoint@3 {
+							reg = <3>;
+							remote-endpoint = <&sor1_in_dc0>;
+						};
+					};
+				};
 			};
 
 			display@15210000 {
@@ -1010,8 +1040,38 @@ display@15210000 {
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
-				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
 				nvidia,head = <1>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dc1_out: port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+
+						dc1_out_dsia: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&dsia_in_dc1>;
+						};
+
+						dc1_out_dsib: endpoint@1 {
+							reg = <1>;
+							remote-endpoint = <&dsib_in_dc1>;
+						};
+
+						dc1_out_sor0: endpoint@2 {
+							reg = <2>;
+							remote-endpoint = <&sor0_in_dc1>;
+						};
+
+						dc1_out_sor1: endpoint@3 {
+							reg = <3>;
+							remote-endpoint = <&sor1_in_dc1>;
+						};
+					};
+				};
 			};
 
 			display@15220000 {
@@ -1026,8 +1086,28 @@ display@15220000 {
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
-				nvidia,outputs = <&sor0 &sor1>;
 				nvidia,head = <2>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dc2_out: port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+
+						dc2_out_sor0: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&sor0_in_dc2>;
+						};
+
+						dc2_out_sor1: endpoint@1 {
+							reg = <1>;
+							remote-endpoint = <&sor1_in_dc2>;
+						};
+					};
+				};
 			};
 		};
 
@@ -1044,6 +1124,25 @@ dsia: dsi@15300000 {
 			status = "disabled";
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsia_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					dsia_in_dc0: endpoint@0 {
+						remote-endpoint = <&dc0_out_dsia>;
+					};
+
+					dsia_in_dc1: endpoint@1 {
+						remote-endpoint = <&dc1_out_dsia>;
+					};
+				};
+			};
 		};
 
 		vic@15340000 {
@@ -1072,6 +1171,25 @@ dsib: dsi@15400000 {
 			status = "disabled";
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsib_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					dsib_in_dc0: endpoint@0 {
+						remote-endpoint = <&dc0_out_dsib>;
+					};
+
+					dsib_in_dc1: endpoint@1 {
+						remote-endpoint = <&dc1_out_dsib>;
+					};
+				};
+			};
 		};
 
 		sor0: sor@15540000 {
@@ -1096,6 +1214,29 @@ sor0: sor@15540000 {
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
 			nvidia,interface = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sor0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					sor0_in_dc0: endpoint@0 {
+						remote-endpoint = <&dc0_out_sor0>;
+					};
+
+					sor0_in_dc1: endpoint@1 {
+						remote-endpoint = <&dc1_out_sor0>;
+					};
+
+					sor0_in_dc2: endpoint@2 {
+						remote-endpoint = <&dc2_out_sor0>;
+					};
+				};
+			};
 		};
 
 		sor1: sor@15580000 {
@@ -1120,6 +1261,29 @@ sor1: sor@15580000 {
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
 			nvidia,interface = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sor1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					sor1_in_dc0: endpoint@0 {
+						remote-endpoint = <&dc0_out_sor1>;
+					};
+
+					sor1_in_dc1: endpoint@1 {
+						remote-endpoint = <&dc1_out_sor1>;
+					};
+
+					sor1_in_dc2: endpoint@2 {
+						remote-endpoint = <&dc2_out_sor1>;
+					};
+				};
+			};
 		};
 
 		dpaux: dpaux@155c0000 {
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 04d6848d19fc..4adb64c083c8 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -10,6 +10,7 @@
 #include <linux/iommu.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/of_graph.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
@@ -86,19 +87,6 @@ static inline void tegra_plane_writel(struct tegra_plane *plane, u32 value,
 	tegra_dc_writel(plane->dc, value, tegra_plane_offset(plane, offset));
 }
 
-bool tegra_dc_has_output(struct tegra_dc *dc, struct device *dev)
-{
-	struct device_node *np = dc->dev->of_node;
-	struct of_phandle_iterator it;
-	int err;
-
-	of_for_each_phandle(&it, err, np, "nvidia,outputs", NULL, 0)
-		if (it.node == dev->of_node)
-			return true;
-
-	return false;
-}
-
 /*
  * Double-buffered registers have two copies: ASSEMBLY and ACTIVE. When the
  * *_ACT_REQ bits are set the ASSEMBLY copy is latched into the ACTIVE copy.
@@ -2061,6 +2049,7 @@ static int tegra_dc_init(struct host1x_client *client)
 	if (err < 0)
 		goto cleanup;
 
+	dc->base.port = of_graph_get_port_by_id(dc->dev->of_node, 0);
 	drm_crtc_helper_add(&dc->base, &tegra_crtc_helper_funcs);
 
 	/*
diff --git a/drivers/gpu/drm/tegra/dc.h b/drivers/gpu/drm/tegra/dc.h
index 3d8ddccd758f..9e4ae77e6270 100644
--- a/drivers/gpu/drm/tegra/dc.h
+++ b/drivers/gpu/drm/tegra/dc.h
@@ -144,7 +144,6 @@ struct tegra_dc_window {
 };
 
 /* from dc.c */
-bool tegra_dc_has_output(struct tegra_dc *dc, struct device *dev);
 void tegra_dc_commit(struct tegra_dc *dc);
 int tegra_dc_state_setup_clock(struct tegra_dc *dc,
 			       struct drm_crtc_state *crtc_state,
diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c
index e36e5e7c2f69..b09935cdf397 100644
--- a/drivers/gpu/drm/tegra/output.c
+++ b/drivers/gpu/drm/tegra/output.c
@@ -5,6 +5,7 @@
  */
 
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_simple_kms_helper.h>
 
@@ -229,16 +230,9 @@ void tegra_output_find_possible_crtcs(struct tegra_output *output,
 				      struct drm_device *drm)
 {
 	struct device *dev = output->dev;
-	struct drm_crtc *crtc;
-	unsigned int mask = 0;
-
-	drm_for_each_crtc(crtc, drm) {
-		struct tegra_dc *dc = to_tegra_dc(crtc);
-
-		if (tegra_dc_has_output(dc, dev))
-			mask |= drm_crtc_mask(crtc);
-	}
+	u32 mask;
 
+	mask = drm_of_find_possible_crtcs(drm, dev->of_node);
 	if (mask == 0) {
 		dev_warn(dev, "missing output definition for heads in DT\n");
 		mask = 0x3;
--- >8 ---

I do see the benefit of using standard bindings where available, but in
this case I think that's hardly an improvement over the current binding,
even though it's undocumented.

> > +    - nvidia,head: The number of the display controller head. This is used to
> > +      setup the various types of output to receive video data from the given
> > +      head.
> 
> Not really clear what this is...

This is the same as for the display controller in older Tegra devices.
The value is the index of the display controller head, or the instance
number of the IP, if that's any clearer. We need this in some places
for register programming. We can't always safely derive it in some
other way.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux