As Mainlining effort for SolidRun CuBox has been carried out on the
Engineering Sample, the board DTS was reflecting this. Actually,
SolidRun CuBox comes in three different variants:
Engineering Sample (ES), production with 1GB RAM (1G),
and production with 2GB RAM (2G).
Therefore, we base current dove-cubox.dts on to the 1G production
variant and add a ES dts to add required quirk for misrouted SDHCI
card detect on top of dove-cubox.dts. For the 2G variant we rely on
the bootloader to setup correct RAM size.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
---
Changelog:
v1->v2:
- drop 2G board dts and rely on bootloader (Suggested by Jason Cooper)
- rework board files to allow to include 1G into ES and add quirks only
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
Cc: Andrew Lunn <andrew@xxxxxxx>
Cc: Gregory Clement <gregory.clement@xxxxxxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/dove-cubox-es.dts | 12 ++++++++++++
arch/arm/boot/dts/dove-cubox.dts | 3 ---
3 files changed, 13 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/dove-cubox-es.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35c146f31e46..e7fec04e659d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -405,6 +405,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
+ dove-cubox-es.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
dove-dove-db.dtb
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts
new file mode 100644
index 000000000000..e28ef056dd17
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox-es.dts
@@ -0,0 +1,12 @@
+#include "dove-cubox.dts"
+
+/ {
+ model = "SolidRun CuBox (Engineering Sample)";
+ compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
+};
+
+&sdio0 {
+ /* sdio0 card detect is connected to wrong pin on CuBox ES */
+ cd-gpios = <&gpio0 12 1>;
+ pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
+};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 7a70f4ca502a..aae7efc09b0b 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -111,9 +111,6 @@
&sdio0 {
status = "okay";
- /* sdio0 card detect is connected to wrong pin on CuBox */
- cd-gpios = <&gpio0 12 1>;
- pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
};
&spi0 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
