Re: [linux-sunxi] Re: [PATCH v3 3/5] drm: panel: Add Xingbangda XBD599 panel (ST7703 controller)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Linus,

On Tue, May 26, 2020 at 01:32:25PM +0200, Linus Walleij wrote:
> Hi Ondrej,
> 

[...]

> > +       dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
> > +                         0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
> > +                         0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
> > +                         0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
> > +                         0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
> > +                         0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
> > +                         0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
> > +                         0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> > +       dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
> > +                         0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                         0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
> > +                         0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
> > +                         0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
> > +                         0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
> > +                         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
> > +                         0xA5, 0x00, 0x00, 0x00, 0x00);
> > +       dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
> > +                         0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
> > +                         0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
> > +                         0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
> > +                         0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
> > +                         0x12, 0x18);
> > +       msleep(20);
> 
> This stuff is really hard or impossible to understand without the
> datasheet.
> 
> In my previous review I wrote:
> 
> It appears that the Himax HX8363 is using the same display controller
> if you look at the datasheet:
> http://www.datasheet-pdf.com/PDF/HX8369-A-Datasheet-Himax-729024
> There you find an explanation to some of the commands.

It is st7703, and we have a fairly complete datasheet available
publicly. I posted links in the cover letter.

> That means, try to get rid of as much of the magic bytes as you can
> and use proper #defines. I know it takes some work but the result
> is so much more useful and readable.

I've added some descriptions from the datasheet as comments next
to the values in v4.

Thank you and regards,
	o.

> Further I wrote:
> 
> You should definately insert code to read the MTP bytes:
> 0xDA manufacturer
> 0xDB driver version
> 0xDC LCD module/driver
> And print these, se e.g. my newly added NT35510 driver or
> the Sony ACX424AKP driver.
> 
> So please do that.
> 
> Yours,
> Linus Walleij
> 
> -- 
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CACRpkdZpiQ7E_v-Gfk6vFcUEiMazvixYaL0ksKeP%3DTq3O6Fh%3DQ%40mail.gmail.com.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux