Re: [PATCH v2 2/3] sdhci: sparx5: Add Sparx5 SoC eMMC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 9 Jun 2020 at 12:20, Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx> wrote:
>
> This adds the eMMC driver for the Sparx5 SoC. It is based upon the
> designware IP, but requires some extra initialization and quirks.

I need a signed-off-by tag to apply this, and I would also appreciate
an ack from Adrian.

Kind regards
Uffe



> ---
>  drivers/mmc/host/Kconfig           |  13 ++
>  drivers/mmc/host/Makefile          |   1 +
>  drivers/mmc/host/sdhci-of-sparx5.c | 274 +++++++++++++++++++++++++++++
>  3 files changed, 288 insertions(+)
>  create mode 100644 drivers/mmc/host/sdhci-of-sparx5.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index eb85237bf2d63..32dc3ced8529d 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -213,6 +213,19 @@ config MMC_SDHCI_OF_DWCMSHC
>           If you have a controller with this interface, say Y or M here.
>           If unsure, say N.
>
> +config MMC_SDHCI_OF_SPARX5
> +       tristate "SDHCI OF support for the MCHP Sparx5 SoC"
> +       depends on MMC_SDHCI_PLTFM
> +       depends on ARCH_SPARX5
> +       select MMC_SDHCI_IO_ACCESSORS
> +       help
> +         This selects the Secure Digital Host Controller Interface (SDHCI)
> +         found in the MCHP Sparx5 SoC.
> +
> +         If you have a Sparx5 SoC with this interface, say Y or M here.
> +
> +         If unsure, say N.
> +
>  config MMC_SDHCI_CADENCE
>         tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
>         depends on MMC_SDHCI_PLTFM
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 4d5bcb0144a0a..4a57c4bf18a2e 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -92,6 +92,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ARASAN)     += sdhci-of-arasan.o
>  obj-$(CONFIG_MMC_SDHCI_OF_ASPEED)      += sdhci-of-aspeed.o
>  obj-$(CONFIG_MMC_SDHCI_OF_AT91)                += sdhci-of-at91.o
>  obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)       += sdhci-of-esdhc.o
> +obj-$(CONFIG_MMC_SDHCI_OF_SPARX5)      += sdhci-of-sparx5.o
>  obj-$(CONFIG_MMC_SDHCI_OF_HLWD)                += sdhci-of-hlwd.o
>  obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC)     += sdhci-of-dwcmshc.o
>  obj-$(CONFIG_MMC_SDHCI_BCM_KONA)       += sdhci-bcm-kona.o
> diff --git a/drivers/mmc/host/sdhci-of-sparx5.c b/drivers/mmc/host/sdhci-of-sparx5.c
> new file mode 100644
> index 0000000000000..1ec40bb27e06d
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-of-sparx5.c
> @@ -0,1 +1,274 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * drivers/mmc/host/sdhci-of-sparx5.c
> + *
> + * MCHP Sparx5 SoC Secure Digital Host Controller Interface.
> + *
> + * Copyright (c) 2019 Microchip Inc.
> + *
> + * Author: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
> + */
> +
> +#include <linux/sizes.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/of_device.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/dma-mapping.h>
> +
> +#include "sdhci-pltfm.h"
> +
> +#define CPU_REGS_GENERAL_CTRL  (0x22 * 4)
> +#define  MSHC_DLY_CC_MASK      GENMASK(16, 13)
> +#define  MSHC_DLY_CC_SHIFT     13
> +#define  MSHC_DLY_CC_MAX       15
> +
> +#define CPU_REGS_PROC_CTRL     (0x2C * 4)
> +#define  ACP_CACHE_FORCE_ENA   BIT(4)
> +#define  ACP_AWCACHE           BIT(3)
> +#define  ACP_ARCACHE           BIT(2)
> +#define  ACP_CACHE_MASK                (ACP_CACHE_FORCE_ENA|ACP_AWCACHE|ACP_ARCACHE)
> +
> +#define MSHC2_VERSION                  0x500   /* Off 0x140, reg 0x0 */
> +#define MSHC2_TYPE                     0x504   /* Off 0x140, reg 0x1 */
> +#define MSHC2_EMMC_CTRL                        0x52c   /* Off 0x140, reg 0xB */
> +#define  MSHC2_EMMC_CTRL_EMMC_RST_N    BIT(2)
> +#define  MSHC2_EMMC_CTRL_IS_EMMC       BIT(0)
> +
> +struct sdhci_sparx5_data {
> +       struct sdhci_host *host;
> +       struct regmap *cpu_ctrl;
> +       int delay_clock;
> +};
> +
> +#define BOUNDARY_OK(addr, len) \
> +       ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
> +
> +/*
> + * If DMA addr spans 128MB boundary, we split the DMA transfer into two
> + * so that each DMA transfer doesn't exceed the boundary.
> + */
> +static void sdhci_sparx5_adma_write_desc(struct sdhci_host *host, void **desc,
> +                                         dma_addr_t addr, int len,
> +                                         unsigned int cmd)
> +{
> +       int tmplen, offset;
> +
> +       pr_debug("%s: write_desc: cmd %02x: len %d, offset 0x%0llx\n",
> +                mmc_hostname(host->mmc), cmd, len, addr);
> +
> +       if (likely(!len || BOUNDARY_OK(addr, len))) {
> +               sdhci_adma_write_desc(host, desc, addr, len, cmd);
> +               return;
> +       }
> +
> +       pr_debug("%s: write_desc: splitting dma len %d, offset 0x%0llx\n",
> +                mmc_hostname(host->mmc), len, addr);
> +
> +       offset = addr & (SZ_128M - 1);
> +       tmplen = SZ_128M - offset;
> +       sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
> +
> +       addr += tmplen;
> +       len -= tmplen;
> +       sdhci_adma_write_desc(host, desc, addr, len, cmd);
> +}
> +
> +static void sparx5_set_cacheable(struct sdhci_host *host, u32 value)
> +{
> +       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +       struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
> +
> +       pr_debug("%s: Set Cacheable = 0x%x\n", mmc_hostname(host->mmc), value);
> +
> +       /* Update ACP caching attributes in HW */
> +       regmap_update_bits(sdhci_sparx5->cpu_ctrl,
> +                          CPU_REGS_PROC_CTRL, ACP_CACHE_MASK, value);
> +}
> +
> +static void sparx5_set_delay(struct sdhci_host *host, u8 value)
> +{
> +       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +       struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
> +
> +       pr_debug("%s: Set DLY_CC = %u\n", mmc_hostname(host->mmc), value);
> +
> +       /* Update DLY_CC in HW */
> +       regmap_update_bits(sdhci_sparx5->cpu_ctrl,
> +                          CPU_REGS_GENERAL_CTRL,
> +                          MSHC_DLY_CC_MASK,
> +                          (value << MSHC_DLY_CC_SHIFT));
> +}
> +
> +static void sdhci_sparx5_set_emmc(struct sdhci_host *host)
> +{
> +       if (!mmc_card_is_removable(host->mmc)) {
> +               u8 value;
> +
> +               value = sdhci_readb(host, MSHC2_EMMC_CTRL);
> +               if (!(value & MSHC2_EMMC_CTRL_IS_EMMC)) {
> +                       value |= MSHC2_EMMC_CTRL_IS_EMMC;
> +                       pr_debug("%s: Set EMMC_CTRL: 0x%08x\n",
> +                                mmc_hostname(host->mmc), value);
> +                       sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
> +               }
> +       }
> +}
> +
> +static void sdhci_sparx5_reset_emmc(struct sdhci_host *host)
> +{
> +       u8 value;
> +
> +       pr_debug("%s: Toggle EMMC_CTRL.EMMC_RST_N\n", mmc_hostname(host->mmc));
> +       value = sdhci_readb(host, MSHC2_EMMC_CTRL) &
> +               ~MSHC2_EMMC_CTRL_EMMC_RST_N;
> +       sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
> +       /* For eMMC, minimum is 1us but give it 10us for good measure */
> +       usleep_range(10, 20);
> +       sdhci_writeb(host, value | MSHC2_EMMC_CTRL_EMMC_RST_N,
> +                    MSHC2_EMMC_CTRL);
> +       /* For eMMC, minimum is 200us but give it 300us for good measure */
> +       usleep_range(300, 400);
> +}
> +
> +static void sdhci_sparx5_reset(struct sdhci_host *host, u8 mask)
> +{
> +       pr_debug("%s: *** RESET: mask %d\n", mmc_hostname(host->mmc), mask);
> +
> +       sdhci_reset(host, mask);
> +
> +       /* Be sure CARD_IS_EMMC stays set */
> +       sdhci_sparx5_set_emmc(host);
> +}
> +
> +static const struct sdhci_ops sdhci_sparx5_ops = {
> +       .set_clock              = sdhci_set_clock,
> +       .set_bus_width          = sdhci_set_bus_width,
> +       .set_uhs_signaling      = sdhci_set_uhs_signaling,
> +       .get_max_clock          = sdhci_pltfm_clk_get_max_clock,
> +       .reset                  = sdhci_sparx5_reset,
> +       .adma_write_desc        = sdhci_sparx5_adma_write_desc,
> +};
> +
> +static const struct sdhci_pltfm_data sdhci_sparx5_pdata = {
> +       .quirks  = 0,
> +       .quirks2 = SDHCI_QUIRK2_HOST_NO_CMD23 | /* Controller issue */
> +                  SDHCI_QUIRK2_NO_1_8_V, /* No sdr104, ddr50, etc */
> +       .ops = &sdhci_sparx5_ops,
> +};
> +
> +int sdhci_sparx5_probe(struct platform_device *pdev)
> +{
> +       int ret;
> +       const char *syscon = "microchip,sparx5-cpu-syscon";
> +       struct sdhci_host *host;
> +       struct sdhci_pltfm_host *pltfm_host;
> +       struct sdhci_sparx5_data *sdhci_sparx5;
> +       struct device_node *np = pdev->dev.of_node;
> +       u32 value;
> +       u32 extra;
> +
> +       host = sdhci_pltfm_init(pdev, &sdhci_sparx5_pdata,
> +                               sizeof(*sdhci_sparx5));
> +
> +       if (IS_ERR(host))
> +               return PTR_ERR(host);
> +
> +       /*
> +        * extra adma table cnt for cross 128M boundary handling.
> +        */
> +       extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M);
> +       if (extra > SDHCI_MAX_SEGS)
> +               extra = SDHCI_MAX_SEGS;
> +       host->adma_table_cnt += extra;
> +
> +       pltfm_host = sdhci_priv(host);
> +       sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
> +       sdhci_sparx5->host = host;
> +
> +       pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
> +       if (IS_ERR(pltfm_host->clk)) {
> +               ret = PTR_ERR(pltfm_host->clk);
> +               dev_err(&pdev->dev, "failed to get core clk: %d\n", ret);
> +               goto free_pltfm;
> +       }
> +       ret = clk_prepare_enable(pltfm_host->clk);
> +       if (ret)
> +               goto free_pltfm;
> +
> +       if (!of_property_read_u32(np, "microchip,clock-delay", &value) &&
> +           value <= MSHC_DLY_CC_MAX)
> +               sdhci_sparx5->delay_clock = value;
> +       else
> +               sdhci_sparx5->delay_clock = -1; /* Autotune */
> +
> +       sdhci_get_of_property(pdev);
> +
> +       ret = mmc_of_parse(host->mmc);
> +       if (ret)
> +               goto err_clk;
> +
> +       sdhci_sparx5->cpu_ctrl = syscon_regmap_lookup_by_compatible(syscon);
> +       if (IS_ERR(sdhci_sparx5->cpu_ctrl)) {
> +               dev_err(&pdev->dev, "No CPU syscon regmap !\n");
> +               ret = PTR_ERR(sdhci_sparx5->cpu_ctrl);
> +               goto err_clk;
> +       }
> +
> +       if (sdhci_sparx5->delay_clock >= 0)
> +               sparx5_set_delay(host, sdhci_sparx5->delay_clock);
> +
> +       if (!mmc_card_is_removable(host->mmc)) {
> +               /* Do a HW reset of eMMC card */
> +               sdhci_sparx5_reset_emmc(host);
> +               /* Update EMMC_CTRL */
> +               sdhci_sparx5_set_emmc(host);
> +               /* If eMMC, disable SD and SDIO */
> +               host->mmc->caps2 |= (MMC_CAP2_NO_SDIO|MMC_CAP2_NO_SD);
> +       }
> +
> +       ret = sdhci_add_host(host);
> +       if (ret)
> +               dev_err(&pdev->dev, "sdhci_add_host() failed (%d)\n", ret);
> +
> +       /* Set AXI bus master to use un-cached access (for DMA) */
> +       if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA) &&
> +           IS_ENABLED(CONFIG_DMA_DECLARE_COHERENT))
> +               sparx5_set_cacheable(host, ACP_CACHE_FORCE_ENA);
> +
> +       pr_debug("%s: SDHC version: 0x%08x\n",
> +                mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_VERSION));
> +       pr_debug("%s: SDHC type:    0x%08x\n",
> +                mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_TYPE));
> +
> +       return ret;
> +
> +err_clk:
> +       clk_disable_unprepare(pltfm_host->clk);
> +free_pltfm:
> +       sdhci_pltfm_free(pdev);
> +       return ret;
> +}
> +
> +static const struct of_device_id sdhci_sparx5_of_match[] = {
> +       { .compatible = "microchip,dw-sparx5-sdhci" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, sdhci_sparx5_of_match);
> +
> +static struct platform_driver sdhci_sparx5_driver = {
> +       .driver = {
> +               .name = "sdhci-sparx5",
> +               .of_match_table = sdhci_sparx5_of_match,
> +               .pm = &sdhci_pltfm_pmops,
> +       },
> +       .probe = sdhci_sparx5_probe,
> +       .remove = sdhci_pltfm_unregister,
> +};
> +
> +module_platform_driver(sdhci_sparx5_driver);
> +
> +MODULE_DESCRIPTION("Sparx5 SDHCI OF driver");
> +MODULE_AUTHOR("Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> --
> Cc: Microchip Linux Driver Support <UNGLinuxDriver@xxxxxxxxxxxxx>
> Cc: linux-mmc@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux