Convert the MXS I2C binding to DT schema format using json-schema
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
Changes since V2:
- remove 'clock-frequency' property's typs and use enum for it, as it ONLY support 100KHz/400KHz.
---
Documentation/devicetree/bindings/i2c/i2c-mxs.txt | 25 -----------
Documentation/devicetree/bindings/i2c/i2c-mxs.yaml | 51 ++++++++++++++++++++++
2 files changed, 51 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mxs.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
deleted file mode 100644
index 4e1c8ac..0000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Freescale MXS Inter IC (I2C) Controller
-
-Required properties:
-- compatible: Should be "fsl,<chip>-i2c"
-- reg: Should contain registers location and length
-- interrupts: Should contain ERROR interrupt number
-- clock-frequency: Desired I2C bus clock frequency in Hz.
- Only 100000Hz and 400000Hz modes are supported.
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
- and I2C DMA channel ID.
- Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: Must be "rx-tx".
-
-Examples:
-
-i2c0: i2c@80058000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx28-i2c";
- reg = <0x80058000 2000>;
- interrupts = <111>;
- clock-frequency = <100000>;
- dmas = <&dma_apbx 6>;
- dma-names = "rx-tx";
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
new file mode 100644
index 0000000..d3134ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mxs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Inter IC (I2C) Controller
+
+maintainers:
+ - Shawn Guo <shawn.guo@xxxxxxxxxx>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-i2c
+ - fsl,imx28-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency:
+ enum: [ 100000, 400000 ]
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - dmas
+ - dma-names
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c@80058000 {
+ compatible = "fsl,imx28-i2c";
+ reg = <0x80058000 2000>;
+ interrupts = <111>;
+ clock-frequency = <100000>;
+ dmas = <&dma_apbx 6>;
+ dma-names = "rx-tx";
+ };
--
2.7.4
