On Mon, Jun 15, 2020 at 11:45:16AM -0600, Rob Herring wrote: > On Fri, Jun 05, 2020 at 07:10:02PM +0100, Jonathan McDowell wrote: > > This patch documents the qca8k's SGMII related properties that allow > > configuration of the SGMII port. > > > > Signed-off-by: Jonathan McDowell <noodles@xxxxxxxx> > > --- > > Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt > > index ccbc6d89325d..9e7d74a248ad 100644 > > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt > > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt > > @@ -11,7 +11,11 @@ Required properties: > > > > Optional properties: > > > > +- disable-serdes-autoneg: Boolean, disables auto-negotiation on the SerDes > > - reset-gpios: GPIO to be used to reset the whole device > > +- sgmii-delay: Boolean, presence delays SGMII clock by 2ns > > +- sgmii-mode: String, operation mode of the SGMII interface. > > + Supported values are: "basex", "mac", "phy". > > Either these should be common properties and documented in a common > spot or they need vendor prefixes. They seem like they former to me > (though 'sgmii-delay' would need to be more general and take a time). I've managed to spin a subsequent revision which avoids the need for a device tree change, based on comments similar to yours. I'll keep them in mind should it become necessary to re-introduce the DT options. J. -- ] https://www.earth.li/~noodles/ [] I'm a creep, I'm a weirdo, what [ ] PGP/GPG Key @ the.earth.li [] the hell am I doing here? [ ] via keyserver, web or email. [] [ ] RSA: 4096/0x94FA372B2DA8B985 [] [