On Mon, May 26, 2014 at 11:33:29PM +0200, Sebastian Hesselbarth wrote: > As Mainlining effort for SolidRun CuBox has been carried out on the > Engineering Sample, the board DTS was reflecting this. Actually, > SolidRun CuBox comes in three different variants: Engineering Sample (ES), > production with 1GB RAM (1G), and production with 2GB RAM (2G). > > Therefore, we split the current dove-cubox.dts into a common board include > and one board dts for each of the above variants. > > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> > --- > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Pawel Moll <pawel.moll@xxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> > Cc: Kumar Gala <galak@xxxxxxxxxxxxxx> > Cc: Russell King <linux@xxxxxxxxxxxxxxxx> > Cc: Jason Cooper <jason@xxxxxxxxxxxxxx> > Cc: Andrew Lunn <andrew@xxxxxxx> > Cc: Gregory Clement <gregory.clement@xxxxxxxxxxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > --- > arch/arm/boot/dts/Makefile | 4 +++- > arch/arm/boot/dts/dove-cubox-1g.dts | 17 ++++++++++++++++ > arch/arm/boot/dts/dove-cubox-2g.dts | 17 ++++++++++++++++ > arch/arm/boot/dts/dove-cubox-es.dts | 23 ++++++++++++++++++++++ > .../boot/dts/{dove-cubox.dts => dove-cubox.dtsi} | 17 ---------------- > 5 files changed, 60 insertions(+), 18 deletions(-) > create mode 100644 arch/arm/boot/dts/dove-cubox-1g.dts > create mode 100644 arch/arm/boot/dts/dove-cubox-2g.dts > create mode 100644 arch/arm/boot/dts/dove-cubox-es.dts > rename arch/arm/boot/dts/{dove-cubox.dts => dove-cubox.dtsi} (86%) > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 35c146f31e46..40a008539c0c 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -404,7 +404,9 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ > armada-xp-matrix.dtb \ > armada-xp-openblocks-ax3-4.dtb > dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ > - dove-cubox.dtb \ > + dove-cubox-1g.dtb \ > + dove-cubox-2g.dtb \ > + dove-cubox-es.dtb \ > dove-d2plug.dtb \ > dove-d3plug.dtb \ > dove-dove-db.dtb > diff --git a/arch/arm/boot/dts/dove-cubox-1g.dts b/arch/arm/boot/dts/dove-cubox-1g.dts > new file mode 100644 > index 000000000000..eebd3f7ca7e6 > --- /dev/null > +++ b/arch/arm/boot/dts/dove-cubox-1g.dts > @@ -0,0 +1,17 @@ > +/dts-v1/; > + > +#include "dove-cubox.dtsi" > + > +/ { > + model = "SolidRun CuBox (1G)"; > + compatible = "solidrun,cubox-1g", "solidrun,cubox", "marvell,dove"; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x40000000>; > + }; > + > + chosen { > + bootargs = "console=ttyS0,115200n8 earlyprintk"; > + }; > +}; > diff --git a/arch/arm/boot/dts/dove-cubox-2g.dts b/arch/arm/boot/dts/dove-cubox-2g.dts > new file mode 100644 > index 000000000000..513b6a68eba3 > --- /dev/null > +++ b/arch/arm/boot/dts/dove-cubox-2g.dts > @@ -0,0 +1,17 @@ > +/dts-v1/; > + > +#include "dove-cubox.dtsi" > + > +/ { > + model = "SolidRun CuBox (2G)"; > + compatible = "solidrun,cubox-2g", "solidrun,cubox", "marvell,dove"; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x80000000>; Do you anticipate any other differences between the 1G and the 2G? Otherwise, I'm inclined to just have a "solidrun,cubox". The bootloader should be setting the amount of RAM at boottime anyway. > + }; > + > + chosen { > + bootargs = "console=ttyS0,115200n8 earlyprintk"; > + }; > +}; > diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts > new file mode 100644 > index 000000000000..5fc17ce34c98 > --- /dev/null > +++ b/arch/arm/boot/dts/dove-cubox-es.dts > @@ -0,0 +1,23 @@ > +/dts-v1/; > + > +#include "dove-cubox.dtsi" > + > +/ { > + model = "SolidRun CuBox (ES)"; "Engineering Sample" ? thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html