Add the required DTS node for the USB VBUS output regulator, which is
available on PM8150B. This will provide the VBUS source to connected
peripherals.
Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 6 ++++++
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 7 +++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index ec44a8bc2f84..b7274d9d7341 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -22,6 +22,12 @@ power-on@800 {
status = "disabled";
};
+ qcom,dcdc@1100 {
+ compatible = "qcom,pm8150b-vbus-reg";
+ status = "disabled";
+ reg = <0x1100>;
+ };
+
qcom,typec@1500 {
compatible = "qcom,pm8150b-usb-typec";
status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 6c6325c3af59..3845d19893eb 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -426,6 +426,13 @@ &usb_1 {
status = "okay";
};
+&spmi_bus {
+ pmic@2 {
+ qcom,dcdc@1100 {
+ status = "okay";
+ };
+};
+
&usb_1_dwc3 {
dr_mode = "peripheral";
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
