> The Keystone II devices have a set of registers that are used to control > the status of its peripherals. This node is intended to allow access to > this functionality. > > Reviewed-by: Arnd Bergmann <arnd@xxxxxxxx> > Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> > --- > .../devicetree/bindings/mfd/ti-keystone-devctrl.txt | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt > > diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt > new file mode 100644 > index 0000000..20963c7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt > @@ -0,0 +1,19 @@ > +* Device tree bindings for Texas Instruments keystone device state control > + > +The Keystone II devices have a set of registers that are used to control > +the status of its peripherals. This node is intended to allow access to > +this functionality. > + > +Required properties: > + > +- compatible: "ti,keystone-devctrl", "syscon" > + > +- reg: contains offset/length value for device state control > + registers space. > + > +Example: > + > +devctrl: device-state-control@0x02620000 { > + compatible = "ti,keystone-devctrl", "syscon"; > + reg = <0x02620000 0x1000>; > +}; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html