Re: [PATCH v3 1/2] dt-bindings: regulator: Add DT binding for cros-ec-regulator

[Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>]

Hi Pi-Hsun,

Thank you for your patch. Some few/trivial comments below

On 10/6/20 11:07, Pi-Hsun Shih wrote:
> Add DT binding documentation for cros-ec-regulator, a voltage regulator
> controlled by ChromeOS EC.
> 
> Signed-off-by: Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
> ---
> Changes from v2:
> * No change
> 
> Changes from v1:
> * Change compatible string to google,regulator-cros-ec.
> * Use reg property in device tree.
> * Change license for dt binding according to checkpatch.pl.
> ---
>  .../bindings/regulator/cros-ec-regulator.yaml | 43 +++++++++++++++++++


The vendor should be part of the binding name, google,cros-ec-regulator.yaml

>  1 file changed, 43 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/cros-ec-regulator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/cros-ec-regulator.yaml
> new file mode 100644
> index 000000000000..e677614dcdf9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/cros-ec-regulator.yaml
> @@ -0,0 +1,43 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/cros-ec-regulator.yaml#

Remember also to change the name here.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ChromeOS EC controlled voltage regulators
> +
> +maintainers:
> +  - Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
> +
> +description:
> +  Any property defined as part of the core regulator binding, defined in
> +  regulator.yaml, can also be used.
> +
> +allOf:
> +  - $ref: "regulator.yaml#"
> +
> +properties:
> +  compatible:
> +    const: google,regulator-cros-ec
> +
> +  reg:
> +    maxItems: 1
> +    description: Identifier for the voltage regulator to ChromeOS EC.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |

Please use a full example,

    spi0 {
      #address-cells = <1>;
      #size-cells = <0>;

      cros_ec: ec@0 {
        compatible = "google,cros-ec-spi";
        reg = <0>;


> +    cros-ec {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      regulator@0 {
> +        compatible = "regulator-cros-ec";

The compatible should be "google,cros-ec-regulator"

> +        regulator-min-microvolt = <1800000>;
> +        regulator-max-microvolt = <3300000>;
> +        reg = <0>;
> +      };
> +    };
> +...
>