Re: R: R: [PATCH v5 11/11] PCI: qcom: Add Force GEN1 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 09, 2020 at 04:48:51PM +0200, ansuelsmth@xxxxxxxxx wrote:
> > -----Messaggio originale-----
> > Da: Bjorn Helgaas <helgaas@xxxxxxxxxx>
> > Inviato: martedì 2 giugno 2020 19:28
> > A: ansuelsmth@xxxxxxxxx
> > Cc: 'Rob Herring' <robh+dt@xxxxxxxxxx>; 'Sham Muthayyan'
> > <smuthayy@xxxxxxxxxxxxxx>; 'Rob Herring' <robh@xxxxxxxxxx>; 'Andy
> > Gross' <agross@xxxxxxxxxx>; 'Bjorn Andersson'
> > <bjorn.andersson@xxxxxxxxxx>; 'Bjorn Helgaas' <bhelgaas@xxxxxxxxxx>;
> > 'Mark Rutland' <mark.rutland@xxxxxxx>; 'Stanimir Varbanov'
> > <svarbanov@xxxxxxxxxx>; 'Lorenzo Pieralisi'
> > <lorenzo.pieralisi@xxxxxxx>; 'Andrew Murray'
> > <amurray@xxxxxxxxxxxxxxxxxxxx>; 'Philipp Zabel'
> > <p.zabel@xxxxxxxxxxxxxx>; linux-arm-msm@xxxxxxxxxxxxxxx; linux-
> > pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
> > Oggetto: Re: R: [PATCH v5 11/11] PCI: qcom: Add Force GEN1 support
> > 
> > [+cc Varada]
> > 
> > On Tue, Jun 02, 2020 at 07:07:27PM +0200, ansuelsmth@xxxxxxxxx
> > wrote:
> > > > On Tue, Jun 02, 2020 at 01:53:52PM +0200, Ansuel Smith wrote:
> > > > > From: Sham Muthayyan <smuthayy@xxxxxxxxxxxxxx>
> > > > >
> > > > > Add Force GEN1 support needed in some ipq8064 board that needs to
> > > > limit
> > > > > some PCIe line to gen1 for some hardware limitation. This is set by
> the
> > > > > max-link-speed binding and needed by some soc based on ipq8064.
> > (for
> > > > > example Netgear R7800 router)
> > > > >
> > > > > Signed-off-by: Sham Muthayyan <smuthayy@xxxxxxxxxxxxxx>
> > > > > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> > > > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > > > > ---
> > > > >  drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++
> > > > >  1 file changed, 13 insertions(+)
> > > > >
> > > > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c
> > > > b/drivers/pci/controller/dwc/pcie-qcom.c
> > > > > index 259b627bf890..0ce15d53c46e 100644
> > > > > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > > > > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > > > > @@ -27,6 +27,7 @@
> > > > >  #include <linux/slab.h>
> > > > >  #include <linux/types.h>
> > > > >
> > > > > +#include "../../pci.h"
> > > > >  #include "pcie-designware.h"
> > > > >
> > > > >  #define PCIE20_PARF_SYS_CTRL			0x00
> > > > > @@ -99,6 +100,8 @@
> > > > >  #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
> > > > >  #define SLV_ADDR_SPACE_SZ			0x10000000
> > > > >
> > > > > +#define PCIE20_LNK_CONTROL2_LINK_STATUS2	0xa0
> > > > > +
> > > > >  #define DEVICE_TYPE_RC				0x4
> > > > >
> > > > >  #define QCOM_PCIE_2_1_0_MAX_SUPPLY	3
> > > > > @@ -195,6 +198,7 @@ struct qcom_pcie {
> > > > >  	struct phy *phy;
> > > > >  	struct gpio_desc *reset;
> > > > >  	const struct qcom_pcie_ops *ops;
> > > > > +	int gen;
> > > > >  };
> > > > >
> > > > >  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
> > > > > @@ -395,6 +399,11 @@ static int qcom_pcie_init_2_1_0(struct
> > > > qcom_pcie *pcie)
> > > > >  	/* wait for clock acquisition */
> > > > >  	usleep_range(1000, 1500);
> > > > >
> > > > > +	if (pcie->gen == 1) {
> > > > > +		val = readl(pci->dbi_base +
> > > > PCIE20_LNK_CONTROL2_LINK_STATUS2);
> > > > > +		val |= 1;
> > > >
> > > > Is this the same bit that's visible in config space as
> > > > PCI_EXP_LNKSTA_CLS_2_5GB?  Why not use that #define?
> > > >
> > > > There are a bunch of other #defines in this file that look like
> > > > redefinitions of standard things:
> > > >
> > > >   #define PCIE20_COMMAND_STATUS                   0x04
> > > >     Looks like PCI_COMMAND
> > > >
> > > >   #define CMD_BME_VAL                             0x4
> > > >     Looks like PCI_COMMAND_MASTER
> > > >
> > > >   #define PCIE20_DEVICE_CONTROL2_STATUS2          0x98
> > > >     Looks like (PCIE20_CAP + PCI_EXP_DEVCTL2)
> > > >
> > > >   #define PCIE_CAP_CPL_TIMEOUT_DISABLE            0x10
> > > >     Looks like PCI_EXP_DEVCTL2_COMP_TMOUT_DIS
> > > >
> > > >   #define PCIE20_CAP                              0x70
> > > >     This one is obviously device-specific
> > > >
> > > >   #define PCIE20_CAP_LINK_CAPABILITIES            (PCIE20_CAP + 0xC)
> > > >     Looks like (PCIE20_CAP + PCI_EXP_LNKCAP)
> > > >
> > > >   #define PCIE20_CAP_ACTIVE_STATE_LINK_PM_SUPPORT (BIT(10) |
> > > > BIT(11))
> > > >     Looks like PCI_EXP_LNKCAP_ASPMS
> > > >
> > > >   #define PCIE20_CAP_LINK_1                       (PCIE20_CAP + 0x14)
> > > >   #define PCIE_CAP_LINK1_VAL                      0x2FD7F
> > > >     This looks like PCIE20_CAP_LINK_1 should be (PCIE20_CAP +
> > > >     PCI_EXP_SLTCAP), but "CAP_LINK_1" doesn't sound like the Slot
> > > >     Capabilities register, and I don't know what PCIE_CAP_LINK1_VAL
> > > >     means.
> > >
> > > The define are used by ipq8074 and I really can't test the changes.
> > > Anyway it shouldn't make a difference use the define instead of the
> > > custom value so a patch should not harm anything... Problem is the
> > > last 2 define that we really don't know what they are about... How
> > > should I proceed? Change only the value related to
> > > PCI_EXP_LNKSTA_CLS_2_5GB or change all the other except the last 2?
> > 
> > I personally would change all the ones I mentioned above (in a
> > separate patch from the one that adds "max-link-speed" support).
> > Testing isn't a big deal because changing the #defines shouldn't
> > change the generated code at all.
> > 
> > PCIE20_CAP_LINK_1 / PCIE_CAP_LINK1_VAL looks like a potential bug or
> > at least a very misleading name.  I wouldn't touch it unless we can
> > figure out what's going on.
> > 
> > Looks like most of this was added by 5d76117f070d ("PCI: qcom: Add
> > support for IPQ8074 PCIe controller").  Shame on me for not asking
> > these questions at the time.
> > 
> > Sham, Varada, can you shed any light on PCIE20_CAP_LINK_1 and
> > PCIE_CAP_LINK1_VAL?
> > 
> 
> Still no response. Should I push a v6 with this fix and leave the
> unknown params as they are?

Yep, that sounds good to me.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux