On Thu, 04 Jun 2020 23:10:29 +0200, Michael Walle wrote: > Add a device tree bindings for the board management controller found on > the Kontron SMARC-sAL28 board. > > Signed-off-by: Michael Walle <michael@xxxxxxxx> > --- > .../bindings/gpio/kontron,sl28cpld-gpio.yaml | 54 +++++++ > .../hwmon/kontron,sl28cpld-hwmon.yaml | 27 ++++ > .../kontron,sl28cpld-intc.yaml | 54 +++++++ > .../bindings/mfd/kontron,sl28cpld.yaml | 153 ++++++++++++++++++ > .../bindings/pwm/kontron,sl28cpld-pwm.yaml | 35 ++++ > .../watchdog/kontron,sl28cpld-wdt.yaml | 35 ++++ > 6 files changed, 358 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml > create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml > create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml > create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml > create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml > My bot found errors running 'make dt_binding_check' on your patch: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.example.dt.yaml: sl28cpld@4a: 'gpio@1a', 'gpio@1b', 'hwmon@b', 'interrupt-controller@1c', 'pwm@c', 'pwm@e' do not match any of the regexes: '^gpio(@[0-9]+)?$', '^hwmon(@[0-9]+)?$', '^interrupt-controller(@[0-9]+)?$', '^pwm(@[0-9]+)?$', '^watchdog(@[0-9]+)?$', 'pinctrl-[0-9]+' See https://patchwork.ozlabs.org/patch/1303780 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit.
