Describe the PCI USB devices that are behind the PCI bridges, adding necessary
links to the USB PHY device.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
This patch is against 'renesas-devel-v3.15-rc7-20140526' tag of Simon Horman's
'renesas.git' repo plus R8A7791/Koelsch/Henninger PCI and USB PHY support
patches posted before. The patch requires the internal PCI DT support, USB PHY
driver, and USB HCD generic PHY support (also already posted) in order to work.
Changes in version 2:
- renamed the PCI OHCI/EHCI device nodes to comply with the PCI binding;
- changed the PHY specifier in the PCI#1 node to reflect that channel #1 support
was dropped;
- resolved rejects.
arch/arm/boot/dts/r8a7791.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
Index: renesas/arch/arm/boot/dts/r8a7791.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791.dtsi
+++ renesas/arch/arm/boot/dts/r8a7791.dtsi
@@ -923,6 +923,20 @@
interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usbphy 0 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usbphy 0 0>;
+ phy-names = "usb";
+ };
};
pci1: pci@ee0d0000 {
@@ -941,5 +955,19 @@
interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usbphy 1 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usbphy 1 0>;
+ phy-names = "usb";
+ };
};
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
