Re: [PATCH v4 02/11] mfd: Add support for Kontron sl28cpld management controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 2020-06-09 17:19, schrieb Lee Jones:
On Tue, 09 Jun 2020, Michael Walle wrote:

Am 2020-06-09 08:47, schrieb Lee Jones:
> On Mon, 08 Jun 2020, Michael Walle wrote:
>
> > Am 2020-06-08 20:56, schrieb Lee Jones:
> > > On Mon, 08 Jun 2020, Michael Walle wrote:
> > >
> > > > Am 2020-06-08 12:02, schrieb Andy Shevchenko:
> > > > > +Cc: some Intel people WRT our internal discussion about similar
> > > > > problem and solutions.
> > > > >
> > > > > On Mon, Jun 8, 2020 at 11:30 AM Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > > > > > On Sat, 06 Jun 2020, Michael Walle wrote:
> > > > > > > Am 2020-06-06 13:46, schrieb Mark Brown:
> > > > > > > > On Fri, Jun 05, 2020 at 10:07:36PM +0200, Michael Walle wrote:
> > > > > > > > > Am 2020-06-05 12:50, schrieb Mark Brown:
> > > > >
> > > > > ...
> > > > >
> > > > > > Right.  I'm suggesting a means to extrapolate complex shared and
> > > > > > sometimes intertwined batches of register sets to be consumed by
> > > > > > multiple (sub-)devices spanning different subsystems.
> > > > > >
> > > > > > Actually scrap that.  The most common case I see is a single Regmap
> > > > > > covering all child-devices.
> > > > >
> > > > > Yes, because often we need a synchronization across the entire address
> > > > > space of the (parent) device in question.
> > > > >
> > > > > >  It would be great if there was a way in
> > > > > > which we could make an assumption that the entire register address
> > > > > > space for a 'tagged' (MFD) device is to be shared (via Regmap) between
> > > > > > each of the devices described by its child-nodes.  Probably by picking
> > > > > > up on the 'simple-mfd' compatible string in the first instance.
> > > > > >
> > > > > > Rob, is the above something you would contemplate?
> > > > > >
> > > > > > Michael, do your register addresses overlap i.e. are they intermingled
> > > > > > with one another?  Do multiple child devices need access to the same
> > > > > > registers i.e. are they shared?
> > > >
> > > > No they don't overlap, expect for maybe the version register, which is
> > > > just there once and not per function block.
> > >
> > > Then what's stopping you having each device Regmap their own space?
> >
> > Because its just one I2C device, AFAIK thats not possible, right?
>
> Not sure what (if any) the restrictions are.

You can only have one device per I2C address. Therefore, I need one device which is enumerated by the I2C bus, which then enumerates its sub-devices.
I thought this was one of the use cases for MFD. (Regardless of how a
sub-device access its registers). So even in the "simple-regmap" case this
would need to be an i2c device.

Here (see below)


E.g.

&i2cbus {
  mfd-device@10 {
    compatible = "simple-regmap", "simple-mfd";
    reg = <10>;
    regmap,reg-bits = <8>;
    regmap,val-bits = <8>;
    sub-device@0 {
      compatible = "vendor,sub-device0";
      reg = <0>;
    };
    ...
};

Or if you just want the regmap:

&soc {
  regmap: regmap@fff0000 {
    compatible = "simple-regmap";
    reg = <0xfff0000>;
    regmap,reg-bits = <16>;
    regmap,val-bits = <32>;
  };

  enet-which-needs-syscon-too@1000000 {
    vendor,ctrl-regmap = <&regmap>;
  };
};

Similar to the current syscon (which is MMIO only..).

We do not need a 'simple-regmap' solution for your use-case.

Since your device's registers are segregated, just split up the
register map and allocate each sub-device with it's own slice.

I don't get it, could you make a device tree example for my
use-case? (see also above)

-michael


> I can't think of any reasons why not, off the top of my head.
>
> Does Regmap only deal with shared accesses from multiple devices
> accessing a single register map, or can it also handle multiple
> devices communicating over a single I2C channel?
>
> One for Mark perhaps.

--
-michael



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux