Re: [PATCH] soc: amlogic: meson-gx-socinfo: Fix S905X3 ID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On 8 Jun 2020, at 12:58 pm, Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
> 
>> The current value is taken from Amlogic's 4.9 bsp kernel which appears
>> to use the wrong ID. For comparison, here's before/after:
>> 
>> [    0.152237] soc soc0: Amlogic Meson SM1 (Unknown) Revision 2b:c (10:2) Detected
>> [    0.152463] soc soc0: Amlogic Meson SM1 (S905X3) Revision 2b:c (10:2) Detected
> 
> For SM1 we have weird values, here are the one we gen on KernelCI:
> SEI610 (S905D3):
> Amlogic Meson SM1 (Unknown) Revision 2b:c (50:2)
> 
> VIM3L (S905D3)
> Amlogic Meson SM1 (Unknown) Revision 2b:c (4:2)
> 
> And you report now:
> Odroid-C4 (S905X4)
> Amlogic Meson SM1 (Unknown) Revision 2b:c (10:2)
> 
> And at the time you reported:
> VIM3L (S905D3)
> Amlogic Meson SM1 (S905D3) Revision 2b:c (b0:2)
> 
> So I'm quite lost here….

In [1] you added the SM1 SoC ID and S905X3 ID { "S905X3", 0x2b, 0x5, 0xf }
which matches the BSP kernel source.

In [2] I added a second S905X3 ID { "S905X3", 0x2b, 0xb0, 0xf2 } for VIM3L, but
this was a mistake (the chip is S905D3) so [3] corrected it to { "S905D3", 0x2b,
0xb0, 0xf0 } which matches my VIM3L board. If the VIM3L’s in KernelCI now show
"2b:c (4:2)” it looks there has been a package change (silicon fixes?) and we
need to add another S905D3 package ID.

In the last week I helped three different users install LE on S905X3 Android
box devices, all of which declare "2b:c (10:2)” as the SoC ID, which matches
the only S905X3 device I own (Odroid C4). So I assumed the BSP is wrong and
sent this fix patch.

If SEI610 is S905X3 (implied by the original SM1 submission from you) KernelCI
output shows the current ID is wrong (‘Unknown’) so we probably need to fix it
with { "S905X3", 0x2b, 0x50, 0xf0 } then add new S905D3 (VIM3L) and S905X3 (as
per this patch) IDs.

If SEI610 is S905D3 (as stated in this thread) the fix in this patch is still
correct, but we also need to send a second patch to add two new S905D3 package
IDs (SEI610 + VIM3L).

I’ll ping you off-list to discuss.

Christian

[1] c9cc9bec36d0 ("soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 ID”)
[2] 1d7c541b8a5b ("soc: amlogic: meson-gx-socinfo: Add S905X3 ID for VIM3L”)
[3] fdfc6997bd08 ("soc: amlogic: meson-gx-socinfo: Fix S905D3 ID for VIM3L”)






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux