Separate out LVDS specific nodes into common file
hihope-rzg2-ex-lvds.dtsi so that this can be re-used by RZ/G2M[N]
variants.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
---
.../boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi | 52 +++++++++++++++++++
.../boot/dts/renesas/hihope-rzg2-ex.dtsi | 37 -------------
...a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts | 39 +-------------
3 files changed, 53 insertions(+), 75 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
new file mode 100644
index 000000000000..40c5e8d6d841
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[MN] HiHope sub board LVDS common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/ {
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 50000>;
+
+ brightness-levels = <0 2 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+};
+
+&gpio1 {
+ /*
+ * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
+ * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
+ */
+ lvds-connector-en-gpio {
+ gpio-hog;
+ gpios = <20 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "lvds-connector-en-gpio";
+ };
+};
+
+&lvds0 {
+ ports {
+ port@1 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
+};
+
+&pfc {
+ pwm0_pins: pwm0 {
+ groups = "pwm0";
+ function = "pwm0";
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 28fe17e3bc4e..acfcfd050a6c 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -13,14 +13,6 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
};
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm0 0 50000>;
-
- brightness-levels = <0 2 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- };
};
&avb {
@@ -51,35 +43,6 @@
status = "okay";
};
-&gpio1 {
- /*
- * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
- * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
- */
- lvds-connector-en-gpio {
- gpio-hog;
- gpios = <20 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "lvds-connector-en-gpio";
- };
-};
-
-&lvds0 {
- /*
- * Please include the LVDS panel .dtsi file and uncomment the below line
- * to enable LVDS panel connected to RZ/G2[MN] boards.
- */
-
- /* status = "okay"; */
-
- ports {
- port@1 {
- lvds_connector: endpoint {
- };
- };
- };
-};
-
&pciec0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
index 3a1dcc914985..c0e9d8ca4a8c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
@@ -7,46 +7,9 @@
*/
#include "r8a774a1-hihope-rzg2m-rev2-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
#include "rzg2-advantech-idk-1110wr-panel.dtsi"
-/ {
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm0 0 50000>;
-
- brightness-levels = <0 2 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- };
-
-};
-
-&gpio1 {
- /*
- * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
- * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
- */
- lvds-connector-en-gpio {
- gpio-hog;
- gpios = <20 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "lvds-connector-en-gpio";
- };
-};
-
&lvds0 {
status = "okay";
};
-
-&pfc {
- pwm0_pins: pwm0 {
- groups = "pwm0";
- function = "pwm0";
- };
-};
-
-&pwm0 {
- pinctrl-0 = <&pwm0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
--
2.17.1
