[PATCH 4/4] arm64: dts: qcom: apq8016-sbc: Replace spaces with tabs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



apq8016-sbc.dtsi uses spaces on some lines instead of tabs.
Make this consistent by converting them to tabs.

Also remove some redundant comments from the DAI link definitions
- this is already visible from the comment block before the "sound"
node or the device node entries itself.

Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 75 ++++++++++++-----------
 1 file changed, 38 insertions(+), 37 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 8a4b790aa7ff..364014c96632 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -453,22 +453,23 @@ capture - Quat MI2S
 
 		*/
 
-                sound: sound {
-                        compatible = "qcom,apq8016-sbc-sndcard";
-                        reg = <0x07702000 0x4>, <0x07702004 0x4>;
-                        reg-names = "mic-iomux", "spkr-iomux";
-
-                        status = "okay";
-                        pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
-                        pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
-                        pinctrl-names = "default", "sleep";
-                        qcom,model = "DB410c";
-                        qcom,audio-routing =
-                                "AMIC2", "MIC BIAS Internal2",
-                                "AMIC3", "MIC BIAS External1";
+		sound: sound {
+			compatible = "qcom,apq8016-sbc-sndcard";
+			reg = <0x07702000 0x4>, <0x07702004 0x4>;
+			reg-names = "mic-iomux", "spkr-iomux";
+
+			status = "okay";
+			pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+			pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+			pinctrl-names = "default", "sleep";
+			qcom,model = "DB410c";
+			qcom,audio-routing =
+				"AMIC2", "MIC BIAS Internal2",
+				"AMIC3", "MIC BIAS External1";
+
 			external-dai-link@0 {
 				link-name = "ADV7533";
-				cpu { /* QUAT */
+				cpu {
 					sound-dai = <&lpass MI2S_QUATERNARY>;
 				};
 				codec {
@@ -476,26 +477,26 @@ codec {
 				};
 			};
 
-                        internal-codec-playback-dai-link@0 {            /* I2S - Internal codec */
-                                link-name = "WCD";
-                                cpu { /* PRIMARY */
-                                        sound-dai = <&lpass MI2S_PRIMARY>;
-                                };
-                                codec {
-                                        sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
-                                };
-                        };
-
-                        internal-codec-capture-dai-link@0 {             /* I2S - Internal codec */
-                                link-name = "WCD-Capture";
-                                cpu { /* PRIMARY */
-                                        sound-dai = <&lpass MI2S_TERTIARY>;
-                                };
-                                codec {
-                                        sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
-                                };
-                        };
-                };
+			internal-codec-playback-dai-link@0 {
+				link-name = "WCD";
+				cpu {
+					sound-dai = <&lpass MI2S_PRIMARY>;
+				};
+				codec {
+					sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+				};
+			};
+
+			internal-codec-capture-dai-link@0 {
+				link-name = "WCD-Capture";
+				cpu {
+					sound-dai = <&lpass MI2S_TERTIARY>;
+				};
+				codec {
+					sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+				};
+			};
+		};
 
 		spmi@200f000 {
 			pm8916@0 {
@@ -650,9 +651,9 @@ resin {
 };
 
 &wcd_codec {
-        status = "okay";
-        clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
-        clock-names = "mclk";
+	status = "okay";
+	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "mclk";
 	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
 	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux