On Thu, 2020-05-21 at 15:22 +0000, Tomasz Figa wrote:
> Hi Xia,
>
> On Fri, Apr 03, 2020 at 05:40:24PM +0800, Xia Jiang wrote:
> > Call pm_runtime_get_sync() before starting a frame and then
> > pm_runtime_put() after completing it. This can save power for the time
> > between processing two frames.
> >
> > Signed-off-by: Xia Jiang <xia.jiang@xxxxxxxxxxxx>
> > ---
> > .../media/platform/mtk-jpeg/mtk_jpeg_core.c | 27 +++++--------------
> > 1 file changed, 6 insertions(+), 21 deletions(-)
> >
>
> Thank you for the patch. Please see my comments inline.
>
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > index a536fa95b3d6..dd5cadd101ef 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > @@ -710,23 +710,6 @@ static struct vb2_v4l2_buffer *mtk_jpeg_buf_remove(struct mtk_jpeg_ctx *ctx,
> > return v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > }
> >
> > -static int mtk_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
> > -{
> > - struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
> > - struct vb2_v4l2_buffer *vb;
> > - int ret = 0;
> > -
> > - ret = pm_runtime_get_sync(ctx->jpeg->dev);
> > - if (ret < 0)
> > - goto err;
> > -
> > - return 0;
> > -err:
> > - while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
> > - v4l2_m2m_buf_done(vb, VB2_BUF_STATE_QUEUED);
> > - return ret;
> > -}
> > -
> > static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
> > {
> > struct mtk_jpeg_ctx *ctx = vb2_get_drv_priv(q);
> > @@ -751,8 +734,6 @@ static void mtk_jpeg_stop_streaming(struct vb2_queue *q)
> >
> > while ((vb = mtk_jpeg_buf_remove(ctx, q->type)))
> > v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
> > -
> > - pm_runtime_put_sync(ctx->jpeg->dev);
> > }
> >
> > static const struct vb2_ops mtk_jpeg_qops = {
> > @@ -761,7 +742,6 @@ static const struct vb2_ops mtk_jpeg_qops = {
> > .buf_queue = mtk_jpeg_buf_queue,
> > .wait_prepare = vb2_ops_wait_prepare,
> > .wait_finish = vb2_ops_wait_finish,
> > - .start_streaming = mtk_jpeg_start_streaming,
> > .stop_streaming = mtk_jpeg_stop_streaming,
> > };
> >
> > @@ -812,7 +792,7 @@ static void mtk_jpeg_device_run(void *priv)
> > struct mtk_jpeg_src_buf *jpeg_src_buf;
> > struct mtk_jpeg_bs bs;
> > struct mtk_jpeg_fb fb;
> > - int i;
> > + int i, ret;
> >
> > src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
> > dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
> > @@ -832,6 +812,10 @@ static void mtk_jpeg_device_run(void *priv)
> > return;
> > }
> >
> > + ret = pm_runtime_get_sync(jpeg->dev);
> > + if (ret < 0)
> > + goto dec_end;
> > +
> > mtk_jpeg_set_dec_src(ctx, &src_buf->vb2_buf, &bs);
> > if (mtk_jpeg_set_dec_dst(ctx, &jpeg_src_buf->dec_param, &dst_buf->vb2_buf, &fb))
> > goto dec_end;
> > @@ -957,6 +941,7 @@ static irqreturn_t mtk_jpeg_dec_irq(int irq, void *priv)
> > v4l2_m2m_buf_done(src_buf, buf_state);
> > v4l2_m2m_buf_done(dst_buf, buf_state);
> > v4l2_m2m_job_finish(jpeg->m2m_dev, ctx->fh.m2m_ctx);
> > + pm_runtime_put_sync(ctx->jpeg->dev);
>
> The _sync variant explicitly waits until the asynchronous PM operation
> completes. This is usually undesired, because the CPU stays blocked for
> no good reason. In this context it is actually a bug, because this is an
> interrupt handler and it's not allowed to sleep. I wonder why this
> actually didn't crash in your testing. Please change to the regular
> pm_runtime_put().
Done.
>
> Best regards,
> Tomasz
