Re: [PATCH V1 1/2] mmc: sdhci-msm: Add interconnect bandwidth scaling support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pradeep,

On Wed, Jun 03, 2020 at 02:39:35PM +0530, Pradeep P V K wrote:
> Interconnect bandwidth scaling support is now added as a
> part of OPP [1]. So, make sure interconnect driver is ready
> before handling interconnect scaling.
> 
> This change is based on
> [1] [Patch v8] Introduce OPP bandwidth bindings
> (https://lkml.org/lkml/2020/5/12/493)
> 
> [2] [Patch v3] mmc: sdhci-msm: Fix error handling
> for dev_pm_opp_of_add_table()
> (https://lkml.org/lkml/2020/5/5/491)
> 
> Signed-off-by: Pradeep P V K <ppvk@xxxxxxxxxxxxxx>
> ---
>  drivers/mmc/host/sdhci-msm.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index b277dd7..bf95484 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -14,6 +14,7 @@
>  #include <linux/slab.h>
>  #include <linux/iopoll.h>
>  #include <linux/regulator/consumer.h>
> +#include <linux/interconnect.h>
>  
>  #include "sdhci-pltfm.h"
>  #include "cqhci.h"
> @@ -1999,6 +2000,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
>  	struct sdhci_pltfm_host *pltfm_host;
>  	struct sdhci_msm_host *msm_host;
>  	struct clk *clk;
> +	struct icc_path *sdhc_path;

nit: The 'sdhc_' prefix doesn't provide any useful information, change it
to 'icc_path', which makes evident what it is?

>  	int ret;
>  	u16 host_version, core_minor;
>  	u32 core_version, config;
> @@ -2070,6 +2072,20 @@ static int sdhci_msm_probe(struct platform_device *pdev)
>  	}
>  	msm_host->bulk_clks[0].clk = clk;
>  
> +	/* Make sure that ICC driver is ready for interconnect bandwdith
> +	 * scaling before registering the device for OPP.
> +	 */
> +	sdhc_path = of_icc_get(&pdev->dev, NULL);
> +	ret = PTR_ERR_OR_ZERO(sdhc_path);
> +	if (ret) {

nit: IMO it would be clearer to do this instead of using PTR_ERR_OR_ZERO()
(as for the OPP table below):

	if (IS_ERR(sdhc_path)) {
		ret = PTR_ERR(sdhc_path);

> +		if (ret == -EPROBE_DEFER)
> +			dev_info(&pdev->dev, "defer icc path: %d\n", ret);

This log seems to add little more than noise, or are there particular reasons
why it is useful in this driver? Most drivers just return silently in case of
deferred probing.

> +		else
> +			dev_err(&pdev->dev, "failed to get icc path:%d\n", ret);
> +		goto bus_clk_disable;
> +	}
> +	icc_put(sdhc_path);
> +
>  	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "core");
>  	if (IS_ERR(msm_host->opp_table)) {
>  		ret = PTR_ERR(msm_host->opp_table);
> -- 
> 1.9.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux